Hacking SWITCH NOOB PARADISE - Ask questions here

[petspeed]

Hi, I use the latest firmware with the latest atmosphere. Just a small question: If I install Incognito, am I able to go online and play games online without being banned? If yes, only the games which is on the cartdrige or also the games on the sd card?

If you want to play online with the games you have on cartridge then the safest way is to do that in SysMMC using only OFW and then use EmuMMC with CFW for your other games. Keep in mind you can only play your cartridge games online. If you want to connect EmuMMC to internet then make sure you use incognito. Atmosphere can do that along with DNS mitm. But you will not be able to play games online in EmuMMC.

 

[Escha]

Hey,

I'm having issues booting fusee-primary. I can boot to Atmosphere through Hekate, but Tinfoil doesn't work. I got the latest sigpatches and Atmosphere.
Injecting fusee-primary does nothing, my Switch screen stays off.
It's a new SD card, formatted to fat32. I created emunand using Hekate.
What can I try?

Thanks in advance.

 

[Hayato213]

Hey,

I'm having issues booting fusee-primary. I can boot to Atmosphere through Hekate, but Tinfoil doesn't work. I got the latest sigpatches and Atmosphere.
Injecting fusee-primary does nothing, my Switch screen stays off.
It's a new SD card, formatted to fat32. I created emunand using Hekate.
What can I try?

Thanks in advance.

You can either use cling wrap to fix tinfoil, if you run fss0 build Atmosphere, or use fusee-primary to load your Atmosphere. As for your Atmosphere problem with Fusee primary you can try latest build on Atmosphere github.

https://github.com/Atmosphere-NX/Atmosphere/releases

https://github.com/Slluxx/sys-cw

 

[Escha]

Hey,

I'm having issues booting fusee-primary. I can boot to Atmosphere through Hekate, but Tinfoil doesn't work. I got the latest sigpatches and Atmosphere.
Injecting fusee-primary does nothing, my Switch screen stays off.
It's a new SD card, formatted to fat32. I created emunand using Hekate.
What can I try?

Thanks in advance.

I managed to get fusee-primary to boot by following a guide to format my SD card and pasting Just Insert the Stuff onto the card and nothing else. Tinfoil seems to work now, but it says I need a system update.
How do I make sure that Atmosphere is running on emuNAND?

 

[petspeed]

You can either use cling wrap to fix tinfoil, if you run fss0 build Atmosphere, or use fusee-primary to load your Atmosphere. As for your Atmosphere problem with Fusee primary you can try latest build on Atmosphere github.

https://github.com/Atmosphere-NX/Atmosphere/releases

https://github.com/Slluxx/sys-cw

Blawar removed the Hekate check in Tinfoil 12.10 so updating to latest version of Tinfoil should fix it without the need for cling wrap.

 

[he11bringer]

can anyone help me, I was on 11.0.1 i think and i havent used my switch in awhileeeeeeeeeeeeee so i accidently clicked on start software update and now im on 12.1.0. when i try to boot into atmosphere(0.19.5) it just crashes, is there anything i can do? I can boot into hekate and go into OFW but dont know how to fix this... atmo, hekate, sig patches are all up to date. it crashes and says error code 2128-0101 (0xca80) after i launch cfw (sysnand) on hekate also when i try to inject reboot_payload/fusee from the atmos folder it also does the same crash thank you in advance

 

[petspeed]

12.1.0 require atmosphere 0.19.5 make sure you have that version (latest)
Have you updated your payloads?

 

[HellsBoyz]

I follow this tutorial https://rentry.co/MarikoEmuNAND
And now my SD card (128GB) now shows only 54.3GB. Please tell me what I did wrong and how to recover hidden/lost storage?

Edit: Nvm, found the issue.

 

[Smoker1]

Is there any reason for having a Came Card in the Slot anymore? Even when I Edit the BCT Configuration, it still comes up saying it can not be read.

 

[he11bringer]

12.1.0 require atmosphere 0.19.5 make sure you have that version (latest)
Have you updated your payloads?

yes sorry was lazy in putting the .5 but yes took the payload off the 19.5 github dl

 

[subydu]

I don't have access to my console backup anymore. FW 9.2.0 atmosphere 0.19.5 and hekate 5.5.8

Not sure how to proceed. Do I run Haku33? Have never gone online in sys or emu but it looks like I might've messed up my partition reformatting at some point because I see a couple NSPs on the main screen with the cloud icon to re-download. I've never gone online with sys or emu but assume sys is dirty if I'm seeing these on sys?

The tricky part is I'm trying to update ofw for emu from 9.2.0 to 12.1.0 and have only ever used choidujournx offline method, looks like that's no longer supported. From what I can tell you have to use daybreak by updating sys legitimately and again, looks like me going online will be problematic. Should I wipe everything and hope having never gone online I'll be alright, then just keep sys up to date online and use daybreak? Or can I try something like AIO updater, which looks like it still required internet access to update and I don't have 90dns or anything.

 

[petspeed]

I don't have access to my console backup anymore. FW 9.2.0 atmosphere 0.19.5 and hekate 5.5.8

Not sure how to proceed. Do I run Haku33? Have never gone online in sys or emu but it looks like I might've messed up my partition reformatting at some point because I see a couple NSPs on the main screen with the cloud icon to re-download. I've never gone online with sys or emu but assume sys is dirty if I'm seeing these on sys?

The tricky part is I'm trying to update ofw for emu from 9.2.0 to 12.1.0 and have only ever used choidujournx offline method, looks like that's no longer supported. From what I can tell you have to use daybreak by updating sys legitimately and again, looks like me going online will be problematic. Should I wipe everything and hope having never gone online I'll be alright, then just keep sys up to date online and use daybreak? Or can I try something like AIO updater, which looks like it still required internet access to update and I don't have 90dns or anything.

If all you want to do is update to 12.1.0 then you can download the firmware from your computer and copy it to your SD card, then use Daybreak to install it from the SD card. No need to go online with your Switch. Just google 'Switch firmware'

 

[harticho]

Hi guys. I'm about to buy a Switch (XAJ4004553 so it should be unpatched). Do I have to check something else if I ant to be able to use RCM / CFW ?
Tank you

 

[Hayato213]

You need a jig to enter RCM mode, and don't post full serial number, you just need the prefix and the first six digits, like XAJ4004553.

@harticho

 

[harticho]

Ok thanks I edited my post. Yeah I know of the jig thig, I was more worried about an update the previous owner would have made or somethig like that...

 

[OnHaDe]

Hey everyone, I have the following issue:
I am trying to create a eMMC RAW GPP backup in Hekate, but everytime I get the error

Error reading 8192 blocks @ LBA 0387000, from eMMC(try 1)

with the backup eventually aborting and failing.
I have tried this with a SD formatted in Fat32 and exFat, a different SD in exFat, backing up USER seperately, and clearing the user cache, all of which yield the same result.
When attempting to create a full backup via NxNandManager I get a reading error in the application and the UMS popup in Hekate displays

Error: SDMMC Read!

The switch is not modified and works fine. The stock is 12.1.0.
Any ideas?

 

[Hayato213]

Ok thanks I edited my post. Yeah I know of the jig thig, I was more worried about an update the previous owner would have made or somethig like that...

If it is unpatched unit, the firmware doesn't matter.

 

[subydu]

If all you want to do is update to 12.1.0 then you can download the firmware from your computer and copy it to your SD card, then use Daybreak to install it from the SD card. No need to go online with your Switch. Just google 'Switch firmware'

Thanks, if the 12.1.0 update folder isn't showing up within Daybreak when placed on the root of the SD does it need to be moved within the Switch folder or some other folder to be selectable for install?

 

[harticho]

Thank you for your answer.

 

[Judo-Throw]

Hello. I have a bit of a problem. I'd like to have my Fire Emblem Three Houses save file to be playable on Yuzu, but I'm on a Patched fully updated Firmware, is there a service that exists anywhere so I that someone might be able to retrieve my save file for me? I own a physical cartridge of the game if that matters. And I also subscribed and backed up my save file to the cloud using the online service in hopes that someone could assist.

I own a CFW switch, but it doesn't work anymore.