Hacking Atmosphere-NX - Custom Firmware in development by SciresM

[fille]

thing is with 11.0.1 no problems,but update or not,that can be debated,but it have to work cause for others it also works without problems.

 

[BigOnYa]

If only one game not working....could be a bad rip of that game.

 

[fille]

Same result,deleted user,created new 1,then linked with linkalho,not working,sjeez,what a mess is this.

--------------------- MERGED ---------------------------

no,cause mario odyssey also doesn't works,could try other source offcourse.

 

[BigOnYa]

Can't mention the site here, but I had a few games while back that did not work from them, and found the games on another site, and they work, so maybe bad rips...good luck with it though. Don't give up, you will get there eventually!

 

[fille]

it aint broken,cause i can boot hekate or atmosphere,as long those works,it must work some way.

 

[Hayato213]

copied deepsea on my sdcard,then i copied the fusee bin hekate payload folder.
Then used tegra rcmgui and launched hekate,then started fusee from there.
Now just installed toad,and same result,i think my switch is something with.
its HOPELESS,i can't see whats wrong.

Deepsea use hekate/fss0 patches as for the payload it use fusee-secondary not fusee primary.

 

[fille]

yep,but i boot to hekate with tegra rcm,and then in hekate i choose in payload the fusee primary

 

[BigOnYa]

Deepsea use hekate/fss0 patches as for the payload it use fusee-secondary not fusee primary.

So if this is the case. then @fille should use the hekate.zip sigpatches?
BTW @fille I heard it does not hurt to get both sets of sigpatches...Fusee.zip and Hekate.zip, may help.

 

[Hayato213]

So if this is the case. then @fille should use the hekate.zip sigpatches?

base on deepsea hekate ipl config it use fss0, so he needs hekate patches or his games will never work if he run fusee-primary even though he can chainload hekate -> fusee primary -> fusee secondary, for fss0 it use hekate -> fusee secondary.

{--- Custom Firmware ---}
[CFW (SYSNAND)]
emummc_force_disable=1
fss0=atmosphere/fusee-secondary.bin
atmosphere=1
logopath=bootloader/bootlogo.bmp
icon=bootloader/res/icon_payload.bmp
{}

[CFW (EMUMMC)]
emummcforce=1
fss0=atmosphere/fusee-secondary.bin
atmosphere=1
logopath=bootloader/bootlogo.bmp
icon=bootloader/res/icon_payload.bmp
{}

 

[fille]

Yep,and i already tryed that,still not working.

--------------------- MERGED ---------------------------

formatted sdcard again

--------------------- MERGED ---------------------------

gona dl atmosphere and sigpatches,i can use a rcmloader or tegra gui,its the same

 

[Hayato213]

Yep,and i already tryed that,still not working.

--------------------- MERGED ---------------------------

formatted sdcard again

--------------------- MERGED ---------------------------

gona dl atmosphere and sigpatches

Forget about deepsea follow this instead, format SD as FAT32, don't use exFAT.

https://gbatemp.net/threads/how-to-hekate-chainload-vanilla-atmos.563255/
https://github.com/Atmosphere-NX/Atmosphere/releases
https://github.com/eXhumer/patches/releases/tag/v12.0.0-3

 

[fille]

ok,fat32,but i did not figuring out how to install games from over network,cause games bigger ads 4gb cant be copied to the sdcard with fat32,and split them with sak give me a nice magic nca error,tryed that before.

 

[Hayato213]

ok,fat32,but i did not figuring out how to install games from over network,cause games bigger ads 4gb cant be copied to the sdcard with fat32,and split them with sak give me a nice magic nca error,tryed that before.

Get the driver working on your computer and do usb install, you can do over network install with awoo but it is slower, no point of putting the files on sd then install, you going to kill that sd card flex long term if you keep taking it out and putting it back in.

 

[fille]

i just copied the atmosphere folder over to the sdcard,then the sigpatches,then copeid toad and installed,same error,it just don't want to work.
Thx for for your help,but i gona stop with it,its beginning to be ridicilous.

 

[Hayato213]

i just copied the atmosphere folder over to the sdcard,then the sigpatches,then copeid toad and installed,same error,it just don't want to work.
Thx for for your help,but i gona stop with it,its beginning to be ridicilous.

perhaps get another person dump of the game, perhaps you got a bad dump. Have you verify your SD card is legit with H2testw/f3x?

 

[fille]

its a 512gb sandisk from amazon.de,payed it 87 euro,so if they start to sell sandisk fakes,i go straight to the police with it.

--------------------- MERGED ---------------------------

but to be sure i gona run the test,and i got scene releases,those should be good.
I know there are also bad dumps.
Ok,test is running,gona sleep now,thx for all the assists.
Sdcard is ok,so i formatted as fat32,installed over usb with goldleaf zelda link awakening,result,same error.
I think its the switch thats the problem.

 

[SaintFlo]

its a 512gb sandisk from amazon.de,payed it 87 euro,so if they start to sell sandisk fakes,i go straight to the police with it.

--------------------- MERGED ---------------------------

but to be sure i gona run the test,and i got scene releases,those should be good.
I know there are also bad dumps.
Ok,test is running,gona sleep now,thx for all the assists.
Sdcard is ok,so i formatted as fat32,installed over usb with goldleaf zelda link awakening,result,same error.
I think its the switch thats the problem.

Have u tried using fuse secondary and hekates patches?? If no then try and report your results herre.

 

[fille]

Have u tried using fuse secondary and hekates patches?? If no then try and report your results herre.

Ok,i got mario 3d world working,seems nsp that are not correctly signed doesn't work anymore,with 11.0.1 it worked fine.
So i think now,with new super mario bros,i want to install it with goldleaf,and i see that the nsp doesn't have a ticket,it maybe doesn't work,testing it now.
New super mario works also,then i must find why some work and others not.
Zelda links awakening keeps error,strange,why?,the other 2 working,so probably bad nsp,but they worked on 11.0.1
I readed that daybreak can firmware downgrade,do you need a nand from 11.01 for it,or is it that simple as just download the 11.01 firmware and install it with daybreak?
https://switch.homebrew.guide/usingcfw/manualupgrade.html
Downgraded back to 11.0.0,put back sxos on the sdcard,and all is working again,now see if newest games can be run,gona update in a couple of months back to atmo to see if it works then.
i use now xci,update them with sak and also dlc,then patch them for lower firmware,seems to be working fine now,until nintendo can patch it out some way.

 

[fille]

Today tryed again,yep,i don't give up.
So i'm back on 12.0.1,latest atmosphere and sigpatches,and installed just captain toad,with tinfoil.
Also the dlc installed,tryed the game,and it works fine,but when i iinstall the latest update for it,then could not start the game,what does this mean guys,that the update is bad nsp?
It have something todo with the update for the game why it doesn't load anymore.

 

[fille]

I used lockpick rcm for getting my keys to check things,all fine,but when it want to dump title keys,no title keys found,is this normal when you don't have a game installed?
Or like i think,if you install a game,it make a title ticket,so when you play it decrypt it and you can play the game?