I've made a previous post about this problem and haven't been able to find the help I need. If someone could spend their time trying to help me figure things out I'd greatly appreciate it.
Good Morning.
- Your NINTENDONT Version please.
- A Picture from your Adapter (not an Amazon Picture please)
- Is there a Switch on the Adapter to change between Wii U or Switch or PC Mode maybe please ?
- Do you use Original Nintendo GameCube Controller(s) ?
- Where is the Adapter plugged into your Wii U please ? Which USB Ports ?
Thank you for your Help.
Name of the 3rd party adapter?
NINTENDONT Version 6.489
USB Loader GX Version 3.0 r1271
GC Adapter: CLOUDREAM
Model #: HS-WU025
Switch for PC and Switch/Wii U: YES
Data plugged into back bottom slot (1?), rumble plugged into separate powered USB hub plugged into wall outlet.
I have official oem Wavebirds and wired GC controllers plugged into the GC adapter.
HDD: Seagate OneTouch 2TB
P/N: 3BDAPD-500
S/N: NABL9RAC
Main plugged into back top slot (0?), extra power (Y-cable) plugged into same seperate USB hub GC adapter ruble is plugged into.
Added the controller folder filled with .ini files (from online, not from NINTENDONT directly) into the root of my HDD, GX, and NINTENDONT folder in a desperate attempt at making things work.
--------------------- MERGED ---------------------------
NINTENDONT Version 6.489
USB Loader GX Version 3.0 r1271
GC Adapter: CLOUDREAM
Model #: HS-WU025
Switch for PC and Switch/Wii U: YES
Data plugged into back bottom slot (1?), rumble plugged into separate powered USB hub plugged into wall outlet.
I have official oem Wavebirds and wired GC controllers plugged into the GC adapter.
HDD: Seagate OneTouch 2TB
P/N: 3BDAPD-500
S/N: NABL9RAC
Main plugged into back top slot (0?), extra power (Y-cable) plugged into same seperate USB hub GC adapter ruble is plugged into.
Added the controller folder filled with .ini files (from online, not from NINTENDONT directly) into the root of my HDD, GX, and NINTENDONT folder in a desperate attempt at making things work.
btw nintendont doest work well with usb hubs at all, you can use wiiu front ports and back ports so 4 should be all you need?NINTENDONT Version 6.489
USB Loader GX Version 3.0 r1271
GC Adapter: CLOUDREAM
Model #: HS-WU025
Switch for PC and Switch/Wii U: YES
Data plugged into back bottom slot (1?), rumble plugged into separate powered USB hub plugged into wall outlet.
I have official oem Wavebirds and wired GC controllers plugged into the GC adapter.
HDD: Seagate OneTouch 2TB
P/N: 3BDAPD-500
S/N: NABL9RAC
Main plugged into back top slot (0?), extra power (Y-cable) plugged into same seperate USB hub GC adapter ruble is plugged into.
Added the controller folder filled with .ini files (from online, not from NINTENDONT directly) into the root of my HDD, GX, and NINTENDONT folder in a desperate attempt at making things work.
--------------------- MERGED ---------------------------
NINTENDONT Version 6.489
USB Loader GX Version 3.0 r1271
GC Adapter: CLOUDREAM
Model #: HS-WU025
Switch for PC and Switch/Wii U: YES
Data plugged into back bottom slot (1?), rumble plugged into separate powered USB hub plugged into wall outlet.
I have official oem Wavebirds and wired GC controllers plugged into the GC adapter.
HDD: Seagate OneTouch 2TB
P/N: 3BDAPD-500
S/N: NABL9RAC
Main plugged into back top slot (0?), extra power (Y-cable) plugged into same seperate USB hub GC adapter ruble is plugged into.
Added the controller folder filled with .ini files (from online, not from NINTENDONT directly) into the root of my HDD, GX, and NINTENDONT folder in a desperate attempt at making things work.
The USB hub is there only for power, it's not plugged into the Wii U.btw nintendont doest work well with usb hubs at all, you can use wiiu front ports and back ports so 4 should be all you need?
also the wavebird could just not be compatible with that adapter at all, unless wired controls do the same, if so i wouldnt use that adapter since it most likely wont work with nintendont if its constantly sending different. inputs.
I have the same adapter as you, was there a special .ini file needed for it because mine isn't detected.Alrighty, I have gotten the adapter to work with one controller!! How do the MultiIn and MultiInValue work? I'm now trying to get all the ports to work
Hi, try this one: https://gbatemp.net/threads/nintendont.349258/post-10216783I have the same adapter as you, was there a special .ini file needed for it because mine isn't detected.