Homebrew Burn2Slot - Re-programm GBA bootlegs on DS

[Oshiroku]

Take picture of GBA cart please, this kind of memory write like MSP55LV128N, but carts with this memory use 2 different bus

--------------------- MERGED ---------------------------

oh, and try clear gba cart contacts

These are the ones I tried to reprogram:

 

[VROdin]

These are the ones I tried to reprogram:

Try change solder point from "N" to "Y"

 

[Oshiroku]

Try change solder point from "N" to "Y"

From which cartridge?

 

[zfreeman]

From which cartridge?

• The first 2: bridge 'Y', un-bridge 'N'.
• The other 2 with '4148' might need the trace cut between the pads, replacing that SMD component with a 1N4148 diode.

https://www.facebook.com/BennVennElectronics/photos/a.945926408854146/1229092727204178

 

[VROdin]

• The first 2: bridge 'Y', un-bridge 'N'.
• The other 2 with '4148' might need the trace cut between the pads, replacing that SMD component with a 1N4148 diode.

https://www.facebook.com/BennVennElectronics/photos/a.945926408854146/1229092727204178

second mod is useless, nds use correct voltages. But bridges must be reconnect, it's open rewrite chip option

 

[Oshiroku]

second mod is useless, nds use correct voltages. But bridges must be reconnect, it's open rewrite chip option

I tried what you said and it doesn't work. The same screen flash happens.

 

[VROdin]

I tried what you said and it doesn't work. The same screen flash happens.

I need more info, can u take pictures?

 

[VROdin]

My buddy test with wood menu, app not work correctly. Use TWLmenu for this

 

[Oshiroku]

My buddy test with wood menu, app not work correctly. Use TWLmenu for this

This is what happens. I'm using a R4-sdhc with TWLMenu.

 

[firke_the_one]

i have an mx29gl128 cart and flashing doesn't work, as mentioned before, the screen just flashes and nothing happens
update: compiled the code myself and now it just formatted my card lmao
update 2: just realized it recognizes it as "Sharp" with an ID of "227E" and size "0MB", what could be the problem?

 

[firke_the_one]

@VROdin what is the reason the app recognizes my macronix mx29gl128 as a sharp flash?

 

[firke_the_one]

This is the cartridge I'm using alongside the original r4 with twlmenu

 

[VROdin]

Release version 0.2, new chips support

--------------------- MERGED ---------------------------

i have an mx29gl128 cart and flashing doesn't work, as mentioned before, the screen just flashes and nothing happens
update: compiled the code myself and now it just formatted my card lmao
update 2: just realized it recognizes it as "Sharp" with an ID of "227E" and size "0MB", what could be the problem?

Now flash size detect not work, may be will be support CFI mode for this soon

 

[VROdin]

I tried what you said and it doesn't work. The same screen flash happens.

try again with new release

 

[VROdin]

These are the ones I tried to reprogram:

Сhange solder point from "Y" to "N" again, it's for battery using

 

[firke_the_one]

I updated and it still detects my cart as Sharp even though it's Macronix and it still just formats the cart empty without writing anything

 

[VROdin]

I updated and it still detects my cart as Sharp even though it's Macronix and it still just formats the cart empty without writing anything

please take picture

 

[firke_the_one]

View attachment 256058
This is the cartridge I'm using alongside the original r4 with twlmenu

@VROdin this is the cart I am using

 

[VROdin]

@VROdin this is the cart I am using

I mean nds screen.
128mbit erasing and writing takes a long time

 

[firke_the_one]

Ignore the "Unknown Flash" text, I forgot to put the cartridge at first