Hacking Sx Core and Sx Lite , test Units Received

[joe rawket]

Does anyone know of an install service for SX Core/Lite in the US? I have no soldering experience and don't trust myself doing this, so don't want to take the risk.

 

[izy]

Does anyone know of an install service for SX Core/Lite in the US? I have no soldering experience and don't trust myself doing this, so don't want to take the risk.

@ModderFokker619

 

[joe rawket]

@ModderFokker619

PM sent

 

[Kill-bill61]

To much solder Bridged points everywhere.

Or wait I got it wrong. They forgot to put shield back on wifi chip.

I need help pm me please

 

[Astur_torque]

Not enough thermal paste all over the place

hehhehee barely...

 

[Zxel09]

Makes a noticeable difference?

Didn’t make any temperature tests. It is not necessary – I had some thermal pads left from my core version upgrade. “Bigger” switch runs subjectively better, when docked.

--------------------- MERGED ---------------------------

You can liquid metal the whole switch and it wont be much cooler.

And corrode all the copper elements?

Its such low power, it can nearly run passively. And on top of it, it already has a decent cooling solution.
I also made some thermal mods, but more or less only because I could, not necessarily because I should.

Absolutely agree.

 

[masbass]

DO NOT RUN CHOIDUJOURNX ON SYSNAND IN MARIKO CONSOLES!
This is a clarification video as you should not run ChouidujourNX on sysnand,
unless you have the BOOT0.BIN file to recover the invisible brick
https://sthetix.info/tutorial/nintendo-switch/do-not-run-choidujournx-on-sysnand-in-mariko-consoles

 

[izy]

DO NOT RUN CHOIDUJOURNX ON SYSNAND IN MARIKO CONSOLES!
This is a clarification video as you should not run ChouidujourNX on sysnand,
unless you have the BOOT0.BIN file to recover the invisible brick
https://sthetix.info/tutorial/nintendo-switch/do-not-run-choidujournx-on-sysnand-in-mariko-consoles

I mean we told you not to run it in sysnand for that exact reason.

Tha is for reading any information that was posted in the last month lmao.

 

[kleinerprinz]

Where i can get / order the Caps for the Switch if they are broken ?

 

[masbass]

Where i can get / order the Caps for the Switch if they are broken ?

I also have this question. Can someone pls add links for these two caps on the side of the shield + the SP1 + SP2 that we solder onto the modchip?

 

[Modificatorul]

I also have this question. Can someone pls add links for these two caps on the side of the shield + the SP1 + SP2 that we solder onto the modchip?

https://ro.mouser.com/ProductDetail/Murata-Electronics/GRM033C80J105ME05D?qs=sGAEpiMZZMukHu%2BjC5l7YbfJ1tTqAZd0R4%2B5unDmof4=

sp1 sp2

and 0.1uf 0201 10v on the left side
https://ro.mouser.com/ProductDetail/TDK/CGA1A1X7T0G104M030BC?qs=P1JMDcb91o5N1214y8aVLg==

 

[Dezmond]

Thanks for the help! Got a V2 flex reserverd.

 

[izy]

Mwah. burned out my V2 flex cable. Anyone of you guys had a V1 version and has the V2 version left? Would love to take it over (can pay if you want for costs + stamp etc..)

the person i forwarded to you has spare v2 flex cables he can sell you one

 

[Tinkerbell]

Not sure if this is the right place to post but since it is SX-Lite related here goes:-
I am trying to dump my eshop game legally bought on one console (1) and load it onto my sx-lite console (2)
They are both on latest OFW and CFW
Console (1) is registered as primary console and I can play the game without access to the internet.
I ran SX installer to dump the nsp
Then I used SX installer to load it onto my sx-lite console (2)
When I run it I get the message 'checking to see if this software can be played.'
How can I bypass this? I thought as it was dumped from my primary console it would work.
Also tried this with Tinfoil but with same results.
Any ideas what I am doing wrong?

 

[izy]

Not sure if this is the right place to post but since it is SX-Lite related here goes:-
I am trying to dump my eshop game legally bought on one console (1) and load it onto my sx-lite console (2)
They are both on latest OFW and CFW
Console (1) is registered as primary console and I can play the game without access to the internet.
I ran SX installer to dump the nsp
Then I used SX installer to load it onto my sx-lite console (2)
When I run it I get the message 'checking to see if this software can be played.'
How can I bypass this? I thought as it was dumped from my primary console it would work.
Also tried this with Tinfoil but with same results.
Any ideas what I am doing wrong?

have you tried the convert to standard crypto option?

 

[izy]

lazy day no installs

until then

 

[Modificatorul]

I have no words , just amazing this the best one i think, can you please send my all colection you gathered, switch lite murder collection .

 

[PizzaBitez]

nvm

 

[Alramir]

.

 

[s2m]

You can't keep doing this to me, it's just too painful

+1 big oof
but then you feel better about your own skills when you see how people could go crazy stupid by taking unnecessary risk installing it without any soldering experience and common sense