Most likely, you'll have to edit the source code and recompile the app yourself. I've heard anecdotes of batteries bulging due to the stress of the extra current draw. The battery will die extremely quickly too. It's not worth it.Is there a way to Override/Increase the GPU Max clock speed in (Handheld Battery Mode) from 460mhz to 921mhz. If yes can you advise me on how to do it?
Thanks
According to my log file, the highest I've gotten is 62.6°C. This was after an hour of playing with the GPU at 921Mhz and the CPU at 1326Mhz. It's winter where I live so ambient temperatures are low. My Switch is still working perfectly. I don't know what is considered the highest safe temperature or if it's safe to overclock in warmer weather.I think it should be somewhere in the 34 pages, but I am too lazy to read them right now
Starting from which temperatures it gets dangerous? I have read that without overclocking the max temperatures reach 60° C, and with full CPU and GPU OC 67° C.
That means 60° C are completely fine? Is there any safe function of the switch when it shuts down automatically to prevent severe damage?
And you did not get any warning from the system?According to my log file, the highest I've gotten is 62.6°C. This was after an hour of playing with the GPU at 921Mhz and the CPU at 1326Mhz. It's winter where I live so ambient temperatures are low. My Switch is still working perfectly. I don't know what is considered the highest safe temperature or if it's safe to overclock in warmer weather.
Big shoutouts to @natinusala for his works on the manager app and the borealis library, and to @WerWolv for doing libtesla
— 🅿️ SAM (@p__sam) June 17, 2020
Mariko's higher speeds cannot be used in HOS, or so I've been told.Since the new mariko version of Tegra X1 in newer switches support higher GPU and RAM frequencies (GPU max. 1.27 GHz, RAM over 2000 MHz) I would like to know whether it will be possible to use these frequencies with sys-clk in the future?
Does the developer intend to distinguish between potentially faster Mariko switches and slower (older) switches, to give the newer ones these additional options?
Thanks
Are you sure with the clock speeds? In fact, it's kinda hard to get official infos about that in my opinion.Mariko's higher speeds cannot be used in HOS, or so I've been told.
Also, Mariko's RAM speed is only 1866mhz afaict. And CPU is also better (2ghz vs 1.78ghz)
I got the Mariko clock speeds from L4T.Are you sure with the clock speeds? In fact, it's kinda hard to get official infos about that in my opinion.
But sure yout might have better sources. I'm just wondering wheter the mariko models could become something similar to a switch "pro" with the help of sys-clk in CFWs someday.
But if these higher speeds are hardware-locked, so that it's impossible to unlock these speed improvements, then it might be okay to stick with the old switch, I guess.
Edit:
Can you show me sources for the mentioned speeds? Can't find it.
Edit 2:
I see now. In another thread here called "will-reverse-nx-work-on-the-switch-lite" you said the following:
"Nintendo’s pcv sysmodule only allows you to go upto 1600mhz. Similarly, you’d only be ale to go upto 921mhz/1785mhz GPU/CPU despite the hardware being able to do 1.2ghz/2091mhz GPU/CPU."
It is not reasonably possible if HOS doesn't allow those speeds.Nothing is impossible in this scene especially with real specification
but i think it will be take long time because m4w and retroNX seems doesn't support sx os except someone besides them can do that or atmosphere get new hack method for mariko