Hello to whomever's reading this reply! I have a USB replica version of a gamecube controller, I have Nintendont and Need For Speed: Most Wanted gamecube version installed on my wii. I bought the USB replica version of a gamecube controller yesterday and was excited to try it out with Need For Speed: Most Wanted. Unfortunately, i found out that every single button was switched. Example: A is switched to B. I got some help from a another forum. I named the folder "controllers" and i named the ini file that i got from the other forum and named "controller.ini". Removed the sd card and put it in the wii. Lanuched Need For Speed: Most Wanted and to my surprise, it didn't work. Went back to the forum and the guy told me to rename the ini file "0006_0079.ini". Did that and still it didn't work. (Nintendont is on my sd card and NFSMW is installed on my usb). The guy told me that if i did all that and it still didn't work, means that it is not sufficient override Nintendont to my own settings and told me to come here to ask how do i override Nintendont's settings. And, here i am. I would love some help here.
Hardware USB Replica Nintendo Gamecube Controller On Nintendont
- Thread starter NoobAtHacking123
- Start date
- Views 4,677
- Replies 11
- Likes 1
Hello.
First of all:
I have tried Need for speed Most wanted US (ID:GOWE69) with
this 3rd Party Gamecube Controller
and the Buttons are in the correct Order.
I can not remember a Game where I had to change something in the .ini File from NINTENDONT with this Controller.
Which Version of NINTENDONT do you have actual please ?
You can see it when NINTENDONT starts Left/Above or on the Homebrew Channel before you Start the Program at the Info Screen.
How do you Start your NINTENDONT ?
From the Homebrew Channel or from within an USBLoader please ?
Thank you for your Assistance.
I have the exact same controller. I use Nintendont version 58.24.32, and i start Nintendont by The Homebrew Channel.Hello.
First of all:
I have tried Need for speed Most wanted US (ID:GOWE69) with
this 3rd Party Gamecube Controller
View attachment 188070 View attachment 188071
and the Buttons are in the correct Order.
I can not remember a Game where I had to change something in the .ini File from NINTENDONT with this Controller.
Which Version of NINTENDONT do you have actual please ?
You can see it when NINTENDONT starts Left/Above or on the Homebrew Channel before you Start the Program at the Info Screen.
View attachment 188072 View attachment 188073
How do you Start your NINTENDONT ?
From the Homebrew Channel or from within an USBLoader please ?
Thank you for your Assistance.
Thank you.
Maybe it looks like the same.I think they where all "produced" in little China and maybe on your Controller is maybe something went wrong....
Can you please test another Gamecube Game to see the Controller has this issue on an other Gamecube Game too ?
Thank you.
I only have one game on Nintendont. I'll have to install another game, it'll take a while. And when you bought your USB replica gamecube controller, was it working just fine? I mean were the buttons in order or no?Thank you.
Maybe it looks like the same.I think they where all "produced" in little China and maybe on your Controller is maybe something went wrong....
Can you please test another Gamecube Game to see the Controller has this issue on an other Gamecube Game too ?
Thank you.
Thank you.
I bought it over Amazon for over 3 Years,still in Stock and very Cheap but I am not sure these are STILL the same....
https://www.amazon.de/gp/product/B003PZC67C/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Thank you.
Now im installing nfs underground. its gonna take a while.Thank you.
I bought it over Amazon for over 3 Years,still in Stock and very Cheap but I am not sure these are STILL the same....
https://www.amazon.de/gp/product/B003PZC67C/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Thank you.
Really REALLY sorry for responding so late! Anyway, i tried to install NFS Underground and tried to play and i have the same problem as NFS Most Wanted. Every button is switch. I can't even drive. And yeah i have the exact same controller as you. So can you help me?
Thank you for your Assistance.
Oh sorry,please excuse it I have overseen you have an
USB Controller.
Sorry,that was my Fault,I do not read correctly.Mine is an Gamecube Controller with the Gamecube Connector.
I am really sorry about that.
Please refer to this Manual:
https://gbatemp.net/threads/nintendont.349258/
The Section with the USB Controllers:
Your USB controller must be compatible with the "USB-HID" standard to work with Nintendont.
Not all USB controllers follow this standard so you will have to test your own controller to see if it works.
USB-HID controllers button mapping can be customized if needed.
By default, Nintendont will try to find your controller's button mapping from an internal list of existing controllers.
Already compatible USB-HID controllers
The following USB-HID gamepads and adapters are working and included in Nintendont:
- PS2 Dual shock
- PS3 Dual shock/Sixaxis
- PS4 Controller
- Logitech Rumble Gamepad F510
- Trio Linker v1 (GC, DC, PS)
- Official WiiU GameCube Controller Adapter [WUP-028] - Supports 4 players and rumble on Wii and WiiU. Supports Gamecube controller, Wavebird, Dance mat, bongo, probably all official controllers too.
- All third parties Wii U GameCube Controller Adapter clones
- Mayflash Wii Classic Controller to USB adapter for PC [PC052] (Multiplayer support!)
- Mayflash Wii Classic Controller to USB Adapter [PC045] (Multiplayer support!)
- Mayflash Wireless Wii U Pro Controller Adapter [W009] (Multiplayer support! L/R analog are not working because WiiU Pro lacks analog shoulder buttons)
- Mayflash 3 in 1 Magic Joy Box adapter [PC035](only GameCube and PS/PS2 ports. The Xbox controller doesn't work).
- Microsoft Sidewinder Force Feedback 2 Joystick
- Hori Real Arcade Pro 3 SA
- CronusMax adapter (for Xbox 360 wired controller)
- CronusMax adapter + Xbox360 PC adapter (for Xbox 360 wireless controller)
- Standard/commonly used USB-HID controller.
- and more...
Not all USB controllers are USB-HID compatible
The following gamepads are NOT WORKING:
- Wii remote alone (use Nunchuk, CC or CCPro extensions instead)
- Wii remote+Hori Fighting Stick Wii [picture] (D-pad down stuck always pressed)
- Wii U gamepad
- Xbox, Xbox 360, Xbox One controllers connected directly to the Wii. (Xbox360 can work with an adapter, see above).
- Mayflash GC Controller Adapter for PC [PC051]
Your USB-HID controller is not in the list?
If you have a specific USB controller you want to play with, you can test if it is compatible with this homebrew:
http://crediar.no-ip.com/HIDTestv4.rar
The readme in this rar-file should explain everything.
Rename to boot.dol to launch the homebrew from HBC.
new versions:
HID_Test v6
changelog since r4
Use this guide to create your own controller.ini file.
And place your controller.ini on the root of your Gaming device.
If your games are located on USB : USB:/controller.ini
If your games are located on USB : SD:/controller.ini
If you want to use different controllers, instead of using "controller.ini" on the root, you can place your files in a sub-folder, and using the PID_VID as filename.
/controllers/PID_VID.ini
/controllers/PID_VID.ini
/controllers/PID_VID.ini
etc.
Note: You can use only one HID-USB Compatible controller or adapter at a time. No multiplayer with HID is possible unless you are using a multi-controllers adapter.
I really hope this helps you.
And again,sorry for the misunderstanding.
Thank you.
Oh. Well thanks for your help anyway. Looks like I have to return it since it has no use for me anymore.Thank you for your Assistance.
Oh sorry,please excuse it I have overseen you have an
USB Controller.
Sorry,that was my Fault,I do not read correctly.Mine is an Gamecube Controller with the Gamecube Connector.
I am really sorry about that.
Please refer to this Manual:
https://gbatemp.net/threads/nintendont.349258/
The Section with the USB Controllers:
USB-HID Gamecube Controllers
Your USB controller must be compatible with the "USB-HID" standard to work with Nintendont.
Not all USB controllers follow this standard so you will have to test your own controller to see if it works.
USB-HID controllers button mapping can be customized if needed.
By default, Nintendont will try to find your controller's button mapping from an internal list of existing controllers.
Already compatible USB-HID controllers
The following USB-HID gamepads and adapters are working and included in Nintendont:
- PS2 Dual shock
- PS3 Dual shock/Sixaxis
- PS4 Controller
- Logitech Rumble Gamepad F510
- Trio Linker v1 (GC, DC, PS)
- Official WiiU GameCube Controller Adapter [WUP-028] - Supports 4 players and rumble on Wii and WiiU. Supports Gamecube controller, Wavebird, Dance mat, bongo, probably all official controllers too.
- All third parties Wii U GameCube Controller Adapter clones
- Mayflash Wii Classic Controller to USB adapter for PC [PC052] (Multiplayer support!)
- Mayflash Wii Classic Controller to USB Adapter [PC045] (Multiplayer support!)
- Mayflash Wireless Wii U Pro Controller Adapter [W009] (Multiplayer support! L/R analog are not working because WiiU Pro lacks analog shoulder buttons)
- Mayflash 3 in 1 Magic Joy Box adapter [PC035](only GameCube and PS/PS2 ports. The Xbox controller doesn't work).
- Microsoft Sidewinder Force Feedback 2 Joystick
- Hori Real Arcade Pro 3 SA
- CronusMax adapter (for Xbox 360 wired controller)
- CronusMax adapter + Xbox360 PC adapter (for Xbox 360 wireless controller)
- Standard/commonly used USB-HID controller.
- and more...
Not all USB controllers are USB-HID compatible
The following gamepads are NOT WORKING:
- Wii remote alone (use Nunchuk, CC or CCPro extensions instead)
- Wii remote+Hori Fighting Stick Wii [picture] (D-pad down stuck always pressed)
- Wii U gamepad
- Xbox, Xbox 360, Xbox One controllers connected directly to the Wii. (Xbox360 can work with an adapter, see above).
- Mayflash GC Controller Adapter for PC [PC051]
Your USB-HID controller is not in the list?
If you have a specific USB controller you want to play with, you can test if it is compatible with this homebrew:
http://crediar.no-ip.com/HIDTestv4.rar
The readme in this rar-file should explain everything.
Rename to boot.dol to launch the homebrew from HBC.
new versions:
HID_Test v6
changelog since r4
Use this guide to create your own controller.ini file.
And place your controller.ini on the root of your Gaming device.
If your games are located on USB : USB:/controller.ini
If your games are located on USB : SD:/controller.ini
If you want to use different controllers, instead of using "controller.ini" on the root, you can place your files in a sub-folder, and using the PID_VID as filename.
/controllers/PID_VID.ini
/controllers/PID_VID.ini
/controllers/PID_VID.ini
etc.
Note: You can use only one HID-USB Compatible controller or adapter at a time. No multiplayer with HID is possible unless you are using a multi-controllers adapter.
I really hope this helps you.
And again,sorry for the misunderstanding.
Thank you.
No. Its the blue version. Anyway im gonna go sleep. Thanks for helping me tho.
Similar threads
- Question
-
-
-
-
@
BakerMan:
@SylverReZ I didn't say I watched either, did I?
I didn't actively watch them, rather, I had the misfortune of witnessing that shit -
-
tempBOT:
LeoTCK has joined the room. -
-
-
-
-
-
@
SylverReZ:
@K3Nv2, Ah shit, here we go again. I ain't represented Grove Street in five years, but the Ballas won't give a shit. -
-
-
-
-
-
-
-
-
-
-
-
-
