Hacking Question RCMX86 installed, Only works without right joycon?

[pman152]

is this normal? I didnt strap the Vol+, Did strap the joycon, and did strap the USB disconnect (but idk how test that one).
Also how is it even loading Hekate and how do I get its missing sleep libraries and use a payload?

 

[Kubas_inko]

is this normal? I didnt strap the Vol+, Did strap the joycon, and did strap the USB disconnect (but idk how test that one).
Also how is it even loading Hekate and how do I get its missing sleep libraries and use a payload?

don't know why it works only without the right joy-con. I had a problem with the strap when I wired it through a tight space and every time I pushed on the back cover, it wouldn't work cause of that. Maybe a similar issue?
Library and everything else goes to the SD (hekate package should have everything).

 

[pman152]

don't know why it works only without the right joy-con. I had a problem with the strap when I wired it through a tight space and every time I pushed on the back cover, it wouldn't work cause of that. Maybe a similar issue?
Library and everything else goes to the SD (hekate package should have everything).

The hekate isnt loading via SD, i have none in it right now and it boots into hekate

 

[Kubas_inko]

The hekate isnt loading via SD, i have none in it right now and it boots into hekate

I know. Everything except the payload is loaded from SD card. So is the library.

 

[pman152]

I know. Everything except the payload is loaded from SD card. So is the library.

I see, and to update UF2, I have to open up the back and solder on a switch?

 

[Kubas_inko]

I see, and to update UF2, I have to open up the back and solder on a switch?

If you have a way of putting it into a download mode (the reed switch probably) all you need is to put it into download mode and connect your switch to the PC. It should automatically show up on your PC and then you can move the uf2 file on it.

 

[pman152]

If you have a way of putting it into a download mode (the reed switch probably) all you need is to put it into download mode and connect your switch to the PC. It should automatically show up on your PC and then you can move the uf2 file on it.

right, i couldnt fit it in with the reed switch on, so had to solder it off, but yeah makes sense, thanks
As for the right joycon its weird sometimes even with it out it doesnt work, its a gamble but seems like it DOES have to be out though, odd stuff.

--------------------- MERGED ---------------------------

Ok odd started playing mario to test controllers, and the right joycon every now and then just straight up disconnects or atleast buttons stop working :/
It seems to actually be both joycons, they both randomly stop

 

[Kubas_inko]

right, i couldnt fit it in with the reed switch on, so had to solder it off, but yeah makes sense, thanks
As for the right joycon its weird sometimes even with it out it doesnt work, its a gamble but seems like it DOES have to be out though, odd stuff.

--------------------- MERGED ---------------------------

Ok odd started playing mario to test controllers, and the right joycon every now and then just straight up disconnects or atleast buttons stop working :/
It seems to actually be both joycons, they both randomly stop

This was happening to me as well. And all because of the strap cable. The joy-con would disconnect on it's own whenever I pushed on the cover.