Hacking SWITCH NOOB PARADISE - Ask questions here

[Richard2019]

If you press + on the icon, there should be an option to delete the software.

Ill check it out thanks again!

It's strange that it doesn't just update over original copy.

 

[pLaYeR^^]

Might possibly be bad .NSP files or they weren't fully installed. Try installing them with another application such as Tinfoil or Goldleaf to see if the issue persists.
The games will be on the HDD and their icons will stay on your home screen. They won't be associated with the micro SD card unless you install some updates to that card for those games.

And what about the save files?

 

[ReDEyeDz]

So I have a 5.1.0 Switch with SXOS installed and autoRCM enabled.
How do I update properly to the latest 6.2? I don't really care about bans, can I just update via WIFI?

 

[Jokiz]

So whats the deal with FW 6.2? Havent used my switch in a while and it's currently on 6.0.1 and have seen a lot of "only works on 6.2" or different update files for units under 6.2 etc.
I'm wondering if updating will cause problems/make things harder?
I use SX OS and would like to keep doing it btw!

 

[Draxzelex]

Ill check it out thanks again!

It's strange that it doesn't just update over original copy.

This also happens if you install an update or DLC for a game but the regions don't match.

And what about the save files?

Save files are stored on the NAND so how you play the games makes no difference.

So I have a 5.1.0 Switch with SXOS installed and autoRCM enabled.
How do I update properly to the latest 6.2? I don't really care about bans, can I just update via WIFI?

If you want to preserve your fuses in case you want to downgrade to a lower firmware in the future, such as when a hypothetical untethered coldboot exploit comes out, then you can update with the homebrew application ChoiDujourNX. If you don't care about fuses, you can update online.

So whats the deal with FW 6.2? Havent used my switch in a while and it's currently on 6.0.1 and have seen a lot of "only works on 6.2" or different update files for units under 6.2 etc.
I'm wondering if updating will cause problems/make things harder?
I use SX OS and would like to keep doing it btw!

Firmware 6.2 broke all CFW for a while but as of now, they are all updated to work with that firmware.

A more technical explanation is that firmware 6.2 hid one of the keys CFW use to decrypt the firmware in order to patch it in another chip within the Switch however all CFW now have ways of obtaining that key so they all now support that firmware.

 

[ReDEyeDz]

If you want to preserve your fuses in case you want to downgrade to a lower firmware in the future, such as when a hypothetical untethered coldboot exploit comes out, then you can update with the homebrew application ChoiDujourNX. If you don't care about fuses, you can update online.
.

I was told that my Switch will brick definitely if I update online. Just in case updated through Choi. I guess I was scared for nothing.
Will it brick if I load Switch on normal original firmware without autoRCM?

 

[Draxzelex]

I was told that my Switch will brick definitely if I update online. Just in case updated through Choi. I guess I was scared for nothing.

Its kind of impossible to brick from updating online but there is something that can happen which one could mistake for a brick. If you are updating from a firmware that supports exFAT, you typically update to the non-exFAT version of the firmware when you update online. This can cause a black screen when trying to boot CFW since the firmware the CFW is currently trying to boot on lacks the exFAT patch and thus lead to a black screen. This is also another reason why it may be better to update offline with homebrew applications.

 

[ReDEyeDz]

Its kind of impossible to brick from updating online but there is something that can happen which one could mistake for a brick. If you are updating from a firmware that supports exFAT, you typically update to the non-exFAT version of the firmware when you update online. This can cause a black screen when trying to boot CFW since the firmware the CFW is currently trying to boot on lacks the exFAT patch and thus lead to a black screen. This is also another reason why it may be better to update offline with homebrew applications.

Thanks a lot. Should I never load original firmware or is it fine?

 

[Draxzelex]

Thanks a lot. Should I never load original firmware or is it fine?

OFW and CFW share the same firmware so if CFW doesn't support exFAT, then OFW won't support it either. If you are worried about burning fuses, booting OFW through a CFW's bootloader will not burn fuses (e.g. Hekate, SX OS). If you boot OFW without RCM, you will burn fuses. Outside of those situations, its perfectly fine to boot OFW.

 

[Richard2019]

Right so if I press the + button it just shows blank background then goes back to menu again. Doesn't do or change anything unfortunately

 

[pOLLYpoCKET]

Dumb question, but I don't see the Kosmos splash screen anymore on my Switch. Everything still works, and I see the firmware in the settings, should I be worried?

 

[Felps]

IS Atmosphere an CFW like ReinX? Or is it something else? I Can't figure it out, and on the instalation of ReinX, it said to deactivate the AutoRCM after change the CFW... So i'm very scared to instal it.

I want to use a save editor, and can't figure it out how to install the homebrew

 

[michaelpatko]

Good day all. Having a ball with my new SX Pro. I was able to dump my retail copy of Zelda BOTW. I set the dumper app to split the xci because my SD card is formatted FAT32. So, my noob question is, If a have an existing XCI that is larger than 4GB, how do I split it so it'll fit onto my SD card AND the switch will be able to read it? Thank you everyone.

 

[twistedominoes]

Is there a new exploit for patched systems out yet?

 

[GATWYAY3.2]

so if i backup my nand with Hekate it will verify the backup but if i load it up through SX OS it wont ?

 

[Draxzelex]

Right so if I press the + button it just shows blank background then goes back to menu again. Doesn't do or change anything unfortunately

Does it not show any options after pressing +? If not, you can try checking in Data Management. If even that fails, Goldleaf can delete titles as well.

Dumb question, but I don't see the Kosmos splash screen anymore on my Switch. Everything still works, and I see the firmware in the settings, should I be worried?

The Kosmos splash screen should only appear if you are using the autoboot option in Hekate.

IS Atmosphere an CFW like ReinX? Or is it something else? I Can't figure it out, and on the instalation of ReinX, it said to deactivate the AutoRCM after change the CFW... So i'm very scared to instal it.

I want to use a save editor, and can't figure it out how to install the homebrew

ReiNX and Atmosphere are very similar. Also the ReiNX guide should have explained how you can add homebrew applications to your Switch. If not, reread the guide; it is very clearly explained if you read through the guide, not skimmed over it.

Good day all. Having a ball with my new SX Pro. I was able to dump my retail copy of Zelda BOTW. I set the dumper app to split the xci because my SD card is formatted FAT32. So, my noob question is, If a have an existing XCI that is larger than 4GB, how do I split it so it'll fit onto my SD card AND the switch will be able to read it? Thank you everyone.

If you google .XCI splitters, a lot of results should pop up. I don't know which ones are better than others or if there is a "best" splitter.

Is there a new exploit for patched systems out yet?

No.

so if i backup my nand with Hekate it will verify the backup but if i load it up through SX OS it wont ?

Yup.

 

[GATWYAY3.2]

wow so i guess ill be using the PC and not that pricey dongle. is there a preferred way you people are formatting the SD card to exFat ? im just gonna use my mac book disk utility, is that okay

 

[NANASHI89]

How do I join/seperate games, updates, + DLC from/into NSPs/XCIs?

 

[RitchieRitchie]

Apologies in advance for the long message!

After creating an emunand and updating to 6.2 with Choi I thought I would check that my original fw was still on 6.1. booted the switch normally without using sxos (or removing the sd card, d'oh!). As soon as I did this a message appeared - 'corrupt files found/deleting etc.' and when I booted into cfw all my installed games were gone (well the icons were still there but they needed to be reinstalled.) I assume this happened because of something to do with the nintendo folder on my sd card?

Anyway, the emunand is working fine and I've reinstalled the games so I'm just wondering would the same thing that happened before (the games getting deleted) if I booted the switch normally again? Or does the emunand/emutendo folder protect you from this? Just worried that if I ever accidentally boot normally I'll lose everything again! Is this the reason people use rcm?

 

[Richard2019]

Does it not show any options after pressing +? If not, you can try checking in Data Management. If even that fails, Goldleaf can delete titles as well.

Ok so data management only deletes games goldleaf the same.