Hacking COMPLETED BASIC MODCHIP / DONGLE UF2 SD BOOT FILES. Trinket / Rebug / RCMX86 / Others

[mattytrog]

Correct. Or short with some wire.

Depends how creative you are

 

[noX1609]

Correct. Or short with some wire.

Depends how creative you are

Thanks for your great help and the awesome things you created

 

[mattytrog]

You are very welcome. Seems that our modchip system is finally complete.

Dual-boot - check
Battery saving - check
No need for autoRCM - check
Multi-payloads - check

If anyone can think of anything that has been missed, let me know.

Time to move on maybe...

 

[Gismor]

Hi mattytrog,
Thank you very much for your awesome work.

Now i have a question. I have a Switch with an installed rebug chip.
I use the old s2 Methode. I can rename the payload in the the „0“ folder.
And i like this Dualboot function. When i press the Power Button boot my switch in OFW and with Volume + Button and power Button Boot my switch into cfw.

Now i have read you do Not Support and Update this Methode anymore.

How can i change to a other Methode without soldering? And which Methode do you think i ms good for me? Im Not a Developer. Hope you can help me. I will update your Files .

Thank you so much.

 

[mattytrog]

Hi mattytrog,
Thank you very much for your awesome work.

Now i have a question. I have a Switch with an installed rebug chip.
I use the old s2 Methode. I can rename the payload in the the „0“ folder.
And i like this Dualboot function. When i press the Power Button boot my switch in OFW and with Volume + Button and power Button Boot my switch into cfw.

Now i have read you do Not Support and Update this Methode anymore.

How can i change to a other Methode without soldering? And which Methode do you think i ms good for me? Im Not a Developer. Hope you can help me. I will update your Files .

Thank you so much.

Hello! Right it is simple enough.

What straps do you have connected? Do you have the joycon strap connected? This is required. If you don`t have it, you have the old method 1 and you have autoRCM.

Disconnent console from PC if it is connected...
Get booted up to your normal or CFW switch OS so you are on your main screen.
Double-press the RESET swtich on the SwitchME... A light may start flashing on it. So, 2 presses in quick succession.

Connect to PC, a drive will open. Drag your desired UF2 files to it. You will have to get into UF2 mode twice - once for the bootloader, once for the chainloader.

Then you can sort your SD as in the OP. Let me know how you get on.

 

[Gismor]

Hello! Right it is simple enough.

What straps do you have connected? Do you have the joycon strap connected? This is required. If you don`t have it, you have the old method 1 and you have autoRCM.

Disconnent console from PC if it is connected...
Get booted up to your normal or CFW switch OS so you are on your main screen.
Double-press the RESET swtich on the SwitchME... A light may start flashing on it. So, 2 presses in quick succession.

Connect to PC, a drive will open. Drag your desired UF2 files to it. You will have to get into UF2 mode twice - once for the bootloader, once for the chainloader.

Then you can sort your SD as in the OP. Let me know how you get on.

Yes i have joycon strap connected.
I dont have AutoRCM on and can get into CFW without the joycon. .

But My Problem is Now which file can i use know? There are so many new Filmes in your github .

Current i use this file from your github:

S2_chainloader_trinket_rebug.uf2

 

[mattytrog]

Yes i have joycon strap connected.
I dont have AutoRCM on and can get into CFW without the joycon. .

But My Problem is Now which file can i use know? There are so many new Filmes in your github .

Current i use this file from your github:

S2_chainloader_trinket_rebug.uf2

Go HERE
Scroll down to modchip preparation
Download the Trinket / Rebug pack... Follow that guide apart from the fitting part.

Let me know how you get on.

 

[Gismor]

Go
Scroll down to modchip preparation
Download the Trinket / Rebug pack... Follow that guide apart from the fitting part.

Let me know how you get on.

Thank you very much for helping.
Where is the different between the *.s2 and the *.nx ? Or only a other name in the ending of the data file
its only nice to know why its better to change from *.s2 to *.nx?

 

[mattytrog]

Thank you very much for helping.
Where is the different between the *.s2 and the *.nx ? Or only a other name in the ending of the data file
its only nice to know why its better to change from *.s2 to *.nx?

No difference at all. I only changed it so I could make a more useful failure graphic

 

[Migz]

Matty great progress on this Fella! Any eta on NS-Atmosphere update? Cheers

 

[snam11]

You are very welcome. Seems that our modchip system is finally complete.

Dual-boot - check
Battery saving - check
No need for autoRCM - check
Multi-payloads - check

If anyone can think of anything that has been missed, let me know.

Time to move on maybe...

can you add support for this bad boy?
https://gbatemp.net/threads/a-nintendo-switch-modchip-in-aliexpress.517428/

 

[mattytrog]

can you add support for this bad boy?
https://gbatemp.net/threads/a-nintendo-switch-modchip-in-aliexpress.517428/

Certainly... Will work on it later.

 

[PSxed]

I'm using the single payload method but i can't seem to boot atmosphere? I've renamed fusee-primary.bin to start.bin but i just get a black screen. ReiNX works just fine. Is it not compatible or am i doing something out of the ordinary?

 

[mattytrog]

I'm using the single payload method but i can't seem to boot atmosphere? I've renamed fusee-primary.bin to start.bin but i just get a black screen. ReiNX works just fine. Is it not compatible or am i doing something out of the ordinary?

Hmmm... Never used it.

Can you boot Hekate and try booting fusee-primary with that? I may need to modify fusee primary. I'll take a look this morning.

 

[PSxed]

Hmmm... Never used it.

Can you boot Hekate and try booting fusee-primary with that? I may need to modify fusee primary. I'll take a look this morning.

I'll try that after work in about 6 hours.

 

[Osmiza]

I'm using the single payload method but i can't seem to boot atmosphere? I've renamed fusee-primary.bin to start.bin but i just get a black screen. ReiNX works just fine. Is it not compatible or am i doing something out of the ordinary?

Hmmm... Never used it.

Can you boot Hekate and try booting fusee-primary with that? I may need to modify fusee primary. I'll take a look this morning.

Hi, I've the same problem: if I try to boot 'fusee-primary.bin', black screen, if I try to chainload 'fusee-primary.bin' from Hekate 4.2, it starts. For reference, I use an usb dongle Trinket M0

 

[mattytrog]

Hi, I've the same problem: if I try to boot 'fusee-primary.bin', black screen, if I try to chainload 'fusee-primary.bin' from Hekate 4.2, it starts. For reference, I use an usb dongle Trinket M0

Ok will look at it later on

 

[peteruk]

Just wanted to say another massive thank you to Matty, he's been helping quite a bit behind the scenes because I stress at times and can't think clearly

Not just a very clever fella but a top guy all around and beyond patient

Thanks

 

[mattytrog]

Very welcome!

 

[PSxed]

Hi, I've the same problem: if I try to boot 'fusee-primary.bin', black screen, if I try to chainload 'fusee-primary.bin' from Hekate 4.2, it starts. For reference, I use an usb dongle Trinket M0

Same for me. I'll just do it this way for now bit cumbersome but whatever works right lol.