Hacking RELEASE [Official] ReiNX thread [DEAD]

Status
Not open for further replies.

Chocola

GBAtemp Meowgular
Member
Joined
Sep 18, 2018
Messages
379
Trophies
0
Age
32
Location
Neko Paradise
XP
723
Country
Korea, South
Yeah, I was referring to the driver. Okay, I'll hold off on homebrew for now. Thanks m8.

It's a thing that should be solved on homebrew SDK's, isn't related with ReiNX at all and can ocurr on any CFW with the use of any homebrew application that use SD card.

--------------------- MERGED ---------------------------

So is there a way to remove the sd card without having to restart the switch?

For now no, Horizon OS don't have the ability to hot load and unload SD files without require restart.
 

Chocola

GBAtemp Meowgular
Member
Joined
Sep 18, 2018
Messages
379
Trophies
0
Age
32
Location
Neko Paradise
XP
723
Country
Korea, South
I cant restored , My NAND backup file is fw.4.0 but my SW update to 6.0 By accident.:cry: I do not know how to do it.

Ops!

Anyways you can restore your 4.0 backup, the unic problem are that you can't run the console without a payload (hekate have a efuses bypass, so you can run the backup to fix your Switch).

When you use the hekate to exec a firmware with more expected efuses you gona have problem with sleep mode, but isn't necessary to fix process, follow this steps:

  1. Search the v6.0 update binaries (can't share it here because go against the rules, but there is a hint: xbins)
  2. Download and install chojidourNX on your switch folder of SD
  3. Restore the 4.0 backup with hekate or hacdiskmount
  4. Enter on RCM mode and launch hekate payload, then run ReiNX from hekate
  5. Go to homebrew menu, start chojidourNX, select the v6.0 update and install with it.
With these steps your console should run again without problems (I mean the sleep problem and the required hekate to startup) and you fix the brick, the bad notice it's that you can't have a clean state to go online anymore.
 
Last edited by Chocola,

GardenAll

Member
Newcomer
Joined
Sep 13, 2009
Messages
19
Trophies
1
XP
234
Country
Brazil
Guys, I have a question... does the ReiNX updates the SYSNAND or it only emulates the lastest firmware on a old one?
 

2Siralv

Well-Known Member
Member
Joined
May 12, 2018
Messages
103
Trophies
0
Age
28
XP
531
Country
Canada
if the reinx toolkit has nand and emmc backup can we somehow implament a backup that is through ftp?/ so connect to a ftp and then backup the nand becuase of ppl with low mem sd cards or jst cant afford them jst a cool implamentation
 

Draxzelex

Well-Known Member
Member
Joined
Aug 6, 2017
Messages
18,985
Trophies
2
Age
29
Location
New York City
XP
13,323
Country
United States
So, I'm on stock 4.1 firmware... to run the lastest ReiNX build I have to update it for real?
You can just update your firmware without burning fuses by using the homebrew app ChoiDujourNX. Fuses prevent downgrading so if you upgrade your firmware without burning them, you maintain a path towards downgrading in the future. Be warned that it will install AutoRCM to prevent you from accidentally burning the fuses via booting up through non-RCM OFW, but AutoRCM is harmless and can be useful in preserving the pins of the Switch.
 
  • Like
Reactions: GardenAll

Chocola

GBAtemp Meowgular
Member
Joined
Sep 18, 2018
Messages
379
Trophies
0
Age
32
Location
Neko Paradise
XP
723
Country
Korea, South
Guys, I have a question... does the ReiNX updates the SYSNAND or it only emulates the lastest firmware on a old one?

ReiNX just apply patches on boot, don't make changes to your sysnand and you need send the payload every time that you reboot the console, but the homebrew software can make changes to SYSNAND and store traces of CFW on telemetry logs too, so you should be care making a clean nand backup without modifications first, then disable all network features and finally restore your clean nand backup when you plain come online again.

I can't test it because im on 5.1.0 but ReiNX work fine with 4.0 too I guess.

If you update with ChoiDujourNX and don't startup your console on normal mode (without RCM) you didn't burn fuses, so you can downgrade when you like to 4.0 restoring again your clean nand backup.

--------------------- MERGED ---------------------------

if the reinx toolkit has nand and emmc backup can we somehow implament a backup that is through ftp?/ so connect to a ftp and then backup the nand becuase of ppl with low mem sd cards or jst cant afford them jst a cool implamentation

You can do a nand backup with hekate on splited mode (create parts of 2GB if your SD don't have 30GB or more), the second option, it's using memloader to allow read nand from PC and do a binary clone of the drive (with Hex Workshop for example)
 
  • Like
Reactions: GardenAll

zona

Active Member
Newcomer
Joined
Jun 16, 2014
Messages
41
Trophies
0
Age
49
XP
579
Country
Macedonia, The Former Yugoslav Republic of
v1.7 (on 5.1) some homebrew crashes, checkpoint for example, I have loaded kips all except nogc ( I fucked up this one so no reasono to use it :P ), so 4 kips loaded, even if I hold "R" on HB lunch, it crashes

and a question, was searching and did not found nothing on it, I just got Sandisk 256GB microsd ( only 70eur, works on PC, running another write / read test, first one was OK ) can I just copy the games from my old 64GB sd or I need to reinstall all of the games ???
 
Last edited by zona,

zboubinou

Well-Known Member
Newcomer
Joined
Jul 18, 2018
Messages
48
Trophies
0
Age
39
XP
153
Country
Canada
Hi guys,
i have some troubles with ReiNX 1.7.
I tried a fresh restart with my sd and ReiNX 1.7 but after i install games on my nand, i can't play them (the software closed cause an error occured message).
I tried again with a fresh restart and ReiNX 1.6 and it work fine. I even install it with 1.6 and tried to run it with 1.7 but it's not working.
1.6 is good for me, it was for you to know ;)
 

Chocola

GBAtemp Meowgular
Member
Joined
Sep 18, 2018
Messages
379
Trophies
0
Age
32
Location
Neko Paradise
XP
723
Country
Korea, South
Hi guys,
i have some troubles with ReiNX 1.7.
I tried a fresh restart with my sd and ReiNX 1.7 but after i install games on my nand, i can't play them (the software closed cause an error occured message).
I tried again with a fresh restart and ReiNX 1.6 and it work fine. I even install it with 1.6 and tried to run it with 1.7 but it's not working.
1.6 is good for me, it was for you to know ;)

Seems a sigpatches failure, how you are runing ReiNX? directly or from hekate?

--------------------- MERGED ---------------------------

v1.7 (on 5.1) some homebrew crashes, checkpoint for example, I have loaded kips all except nogc ( I fucked up this one so no reasono to use it :P ), so 4 kips loaded, even if I hold "R" on HB lunch, it crashes

and a question, was searching and did not found nothing on it, I just got Sandisk 256GB microsd ( only 70eur, works on PC, running another write / read test, first one was OK ) can I just copy the games from my old 64GB sd or I need to reinstall all of the games ???

You can copy the old SD to new SD directly, there are the game files and the titles and tickets remain on console NAND, about the crash, I can't reproduce it on 5.1
 
  • Like
Reactions: zona and manook

Crashdummyy

Well-Known Member
Member
Joined
Mar 5, 2017
Messages
115
Trophies
0
Age
29
XP
1,349
Country
Australia
I hope someone can help me here...
There are some games I just can't install....

I always get something like:
Error Code 0x0024a402 ( Mega Man 11 )

or

*.na is unreadable! you may have a bad dump fs_mitm may need to be removed,or your fw version may be too low to decrypt.. EDone!

I am running 4.0.1 with exFat update.
I can install ( and play ) most of the games yet I can't install Mega man 11 and Bastion f.e

I've been using reiNX for a while now.. I freshly installed it (http://reinx.guide ) yet it still won't work.

Especially for Mega Man 11 there is nothing on the Tinfoil thread helping me..
 

Draxzelex

Well-Known Member
Member
Joined
Aug 6, 2017
Messages
18,985
Trophies
2
Age
29
Location
New York City
XP
13,323
Country
United States
I hope someone can help me here...
There are some games I just can't install....

I always get something like:
Error Code 0x0024a402 ( Mega Man 11 )

or

*.na is unreadable! you may have a bad dump fs_mitm may need to be removed,or your fw version may be too low to decrypt.. EDone!

I am running 4.0.1 with exFat update.
I can install ( and play ) most of the games yet I can't install Mega man 11 and Bastion f.e

I've been using reiNX for a while now.. I freshly installed it (http://reinx.guide ) yet it still won't work.

Especially for Mega Man 11 there is nothing on the Tinfoil thread helping me..
MegaMan 11 needs a firmware of 5.X
 

Chocola

GBAtemp Meowgular
Member
Joined
Sep 18, 2018
Messages
379
Trophies
0
Age
32
Location
Neko Paradise
XP
723
Country
Korea, South
I hope someone can help me here...
There are some games I just can't install....

I always get something like:
Error Code 0x0024a402 ( Mega Man 11 )

or

*.na is unreadable! you may have a bad dump fs_mitm may need to be removed,or your fw version may be too low to decrypt.. EDone!

I am running 4.0.1 with exFat update.
I can install ( and play ) most of the games yet I can't install Mega man 11 and Bastion f.e

I've been using reiNX for a while now.. I freshly installed it (http://reinx.guide ) yet it still won't work.

Especially for Mega Man 11 there is nothing on the Tinfoil thread helping me..

Are you sure that the game package aren't corrupted?

I get a similar error on ZeroTwoXCI installer and the problem was that I don't have enought space to unpack and decrypt the game, it's possible that can be related too because the ZeroTwoXCI are a mod of tinfoil.

Edit: Check before, require FW 5.X, you can update with ChoiDujourNX without burning fuses and rollback to 4.X when you like.
 
Last edited by Chocola,

fisher6

Active Member
Newcomer
Joined
Jul 14, 2017
Messages
25
Trophies
0
Age
112
XP
974
Country
United States
Running the latest release 1.7 from github on 2.3.0 directly from RCM gives me a black screen after ReiNX and Nintendo splash. Any ideas?
 
Status
Not open for further replies.

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
  • Sicklyboy @ Sicklyboy:
    maaaaan that's so awesome but I also don't want to fork over a hundo for it
  • Veho @ Veho:
    The fuuuuu---
  • Veho @ Veho:
    I thought it was an actual xBox at that price.
  • Sicklyboy @ Sicklyboy:
    I wanna grab a 360 Slim and a 360 E one of these days. Missed the boat of getting them at their lowest though, once they were discontinued. Could've got them for cheap back when I was a broke 20 something working at Target, but then again, I was a broke 20 something working at Target
  • Veho @ Veho:
    Being broke is no fun.
  • K3Nv2 @ K3Nv2:
    @Sicklyboy, $150 isn't that bad for a jtag slim on ebay
  • Veho @ Veho:
    I only wish it was actually playable.
  • Veho @ Veho:
    There's a guy on the Tube of You that makes playable mechanical arcade games out of Lego. This could work on the same principle.
  • Veho @ Veho:
    Just a couple of guys taking their manatee out for some fresh air, why you have to molest them?
  • Veho @ Veho:
    Stupid Chinese shop switched their shipping company and this one is slooooooow.
  • LeoTCK @ LeoTCK:
    STOP BUYING CHINESE CRAP THEN
  • LeoTCK @ LeoTCK:
    SUPPORT LOCAL PRODUCTS, MAKE REVOLUTION
  • LeoTCK @ LeoTCK:
    THEY KEEP REMOVING LOCAL SHIt AND REPLACING WItH INFERIOR CHINESE CRAP
  • LeoTCK @ LeoTCK:
    THATS WHY MY PARTNER CANT GET A GOOTWEAR HIS SIZE ANYMORE
  • LeoTCK @ LeoTCK:
    HE HAS BIG FOOT AND BIG DUCK
  • LeoTCK @ LeoTCK:
    d*ck i mean*
  • LeoTCK @ LeoTCK:
    lol
  • Veho @ Veho:
    Mkay.
  • Veho @ Veho:
    I just ordered another package from China just to spite you.
  • SylverReZ @ SylverReZ:
    Leo could not withstand communism.
  • SylverReZ @ SylverReZ:
    Its OUR products to begin with lol.
    SylverReZ @ SylverReZ: Its OUR products to begin with lol.