Hardware Tutuo pro controller wireless stop working after the update

[gianm93]

Nintendo didn't do any new changes from 5.x to 6.0 that is why all the third party controllers are still compatible.

I've only found two update tools, but they are for the brands you already tried. There is another sold as 'sunwaytek n10w' but they removed the update from their page.

I think there is nothing to do

 

[SMontblanc]

I sent an email to the firmware/chip manufacturer. I'm sure they are not going to reply, but we do not lose anything for trying.

It would be great if there was a backup tool or a way to modify the properties of these controllers, like the depicted colors in the console.

 

[gianm93]

I sent an email to the firmware/chip manufacturer. I'm sure they are not going to reply, but we do not lose anything for trying.

It would be great if there was a backup tool or a way to modify the properties of these controllers, like the depicted colors in the console.

Let's hope. Thanks

 

[SMontblanc]

You're welcome.

By the way, the tool you were using had "ver_21" at the end of the window's title bar name? I have found a more recent update from March (ver_24). If it's not the same give it a try:

https://drive.google.com/open?id=1hGk5nuG1COF9WXbMZysd5bESknaZ-3fp

 

[gianm93]

You're welcome.

By the way, the tool you were using had "ver_21" at the end of the window's title bar name? I have found a more recent update from March (ver_24). If it's not the same give it a try:

https://drive.google.com/open?id=1hGk5nuG1COF9WXbMZysd5bESknaZ-3fp

I already tried both versions

 

[DavidWon]

Guys, I'm in 6.0 and I can pair the control but ABYX does not work. Any solution? Already updated, LEDs died, I do not know what else to do.

 

[gianm93]

Guys, I'm in 6.0 and I can pair the control but ABYX does not work. Any solution? Already updated, LEDs died, I do not know what else to do.

You have the same problem that I have. Sadly we haven't found a solution yet

 

[SMontblanc]

They are investigating it.

If your controller has an USB C port I suspect that you applied an old firmware to a newer PCB. I opened mine and it has written on it: 2018-06-14 V1.16, the available updates are from January and March.

By the way the real name of the controller is JRH 8575. The one that looks like an Ouya gamepad is the JRH 8576. And the Switch Pro Controller clone S 026. All use a firmware from the same manufacturer and a Bluetooth RDA chip (with FM tuner inside, lol).

 

[gianm93]

They are investigating it.

If your controller has an USB C port I suspect that you applied an old firmware to a newer PCB. I opened mine and it has written on it: 2018-06-14 V1.16, the available updates are from January and March.

By the way the real name of the controller is JRH 8575. The one that looks like an Ouya gamepad is the JRH 8576. And the Switch Pro Controller clone S 026. All use a firmware from the same manufacturer and a Bluetooth RDA chip (with FM tuner inside, lol).

do you have the right fw?

 

[SMontblanc]

do you have the right fw?

Yes, my controller did work out of the box with 5.1 so I never changed the firmware.

 

[DavidWon]

Guys, I SOLVED THE PROBLEM!!!!

I spent days searching Amazon for the vendors' answers and finally I found one that had the link to this Software below.

Installation is normal, instructions are in the zip. The lights flash again and to match the switch the first time you need to connect via USB.

PS. My version is the one with USB Type C.

 

[SMontblanc]

Guys, I SOLVED THE PROBLEM!!!!

I spent days searching Amazon for the vendors' answers and finally I found one that had the link to this Software below.

Installation is normal, instructions are in the zip. The lights flash again and to match the switch the first time you need to connect via USB.

PS. My version is the one with USB Type C.

You had better luck than me... none of the sellers I contacted knew anything about the issue and the manufacturer of the chip ignored me.

 

[DavidWon]

Try to download

You had better luck than me... none of the sellers I contacted knew anything about the issue and the manufacturer of the chip ignored me.

Try to download the file.

 

[SMontblanc]

Try to download

Try to download the file.

Thanks but my controller works, I was trying to find an update to help OP and anyone with the same problem.

 

[pSouza1]

@DavidWon and @SMontblanc

I have this controller... but my version has not usb type c. It has the old micro usb.
I'm having some problems with input lag... I had to update it once to make it work in Nintendo Switch update 5 (march update)

If I use the update @DavidWon posted, will I brick my gamepad? Or it works on both usb-c or micro-usb versions? Should I try?


UPDATE: Well... I did it! And it worked! I'm not sure if it solves the input lag problem... I will have to test it better

 

[Zoria]

Doesn't work anymore since the release of fw 12.0.0, a solution or has it been abandoned?

 

[skullemonkey]

Doesn't work anymore since the release of fw 12.0.0, a solution or has it been abandoned?

With 12.0.0 you have to connect the controller once with USB to the dock.

 

[Andresgba84]

Hi I have the Tutuo Controller and in firm 12 I cannot connect it wireless....

I used the usb c wire to connect the controller to my switch and it connected suffessfully... wired,, I mean, usb wired is ok, however, after that , I tried to connect the tutuo controller several times to my switch wirelessly and it was not possible...


Any suggestion??

I updated the controller using the update file in the previous page on this thread... page 1,

Any link to get the latest fimrware for this controller please???

 

[Tonyb2388]

Hi I have the Tutuo Controller and in firm 12 I cannot connect it wireless....

I used the usb c wire to connect the controller to my switch and it connected suffessfully... wired,, I mean, usb wired is ok, however, after that , I tried to connect the tutuo controller several times to my switch wirelessly and it was not possible...


Any suggestion??

I updated the controller using the update file in the previous page on this thread... page 1,

Any link to get the latest fimrware for this controller please???

Have you solved?

 

[AntonValodzkin]

ryochan7-ds4windows- cable and this app will help

Post automatically merged: Dec 18, 2025

ryochan7-ds4windows- cable and this app will help