Finally managed to do the exFAT thing, still on 4.0.1 FW. But I cant seem to boot the switch with the dongle, it doesnt do anything. When i payload hekate I can go to stock thats ok, but after I turn it off and try booting SX OS pro with dongle, nothing happens again...
Even though here's not the support forum for this I'll say this:
Charge it.
You're a life saver, have been stressing out so much today. Thx for the awesome support !
I don't own one either but it's pretty obvious. Capacitors so small, can't withstand shit of power inside them.
Normally I don't reply on posts that have to do with SX.
I don't have a problem with the dongle (other than being overpriced) but with SX "OS" it's another story.
And anyway, they are off-topic here.
*Disclaimer: Because people forget and assume things, the above sentences are my opinion. No one has to agree with it. Only respect it.
Also, I don't care and judge people that use it. It is your console and money and you do whatever you want with them.
Last edited by CTCaer,
Can i just say a huge thanks! I some how managed to mess up the exFAT update and blue screened my switch...
Fortunately i had backed up my NAND and after a painful hour, it fully restored using your payload. Thanks!!!
You are welcome.Can i just say a huge thanks! I some how managed to mess up the exFAT update and blue screened my switch...
Fortunately i had backed up my NAND and after a painful hour, it fully restored using your payload. Thanks!!!
Yes, what you ended up doing was breaking pkg2. That's why the blue screen.
he could have just used memloader and hacDiskMount to reflash his pkg2 backup, no ?
this is completely off topic, but about that ExFat tutorial, I and a lot of ppl managed to pull it off first try, just take your time, make sure to get a game for your right fw version, and use the latest version of the tools, not the one in the OP, and it should go as planned
(and use this to get the keys, might be easier than looking for them online https://github.com/tesnos/kezplez-nx/releases/tag/v1.1 )
about the autoRCM "brick", I actually thought about the autoRCM thing yesterday, but got thrown off when he first mentioned trying the dongle. then I got it with the following posts lol
this is completely off topic, but about that ExFat tutorial, I and a lot of ppl managed to pull it off first try, just take your time, make sure to get a game for your right fw version, and use the latest version of the tools, not the one in the OP, and it should go as planned
(and use this to get the keys, might be easier than looking for them online https://github.com/tesnos/kezplez-nx/releases/tag/v1.1 )about the autoRCM "brick", I actually thought about the autoRCM thing yesterday, but got thrown off when he first mentioned trying the dongle. then I got it with the following posts lol
Last edited by Azel,
Yes you can reflash pkg2 with these tools.he could have just used memloader and hacDiskMount to reflash his pkg2 backup, no ?
this is completely off topic, but about that ExFat tutorial, I and a lot of ppl managed to pull it off first try, just take you time, make sure get a game for your right fw version, and use the latest version off the tools, not the one in the OP, and it should go as planned
about the autoRCM "brick", I actually thought about the autoRCM yesterday, but got thrown off when he first mentioned trying the dongle. then I got it with the following posts lol
or with Hekate
btw, I just did that actually, it took me a bit of time to understand what was wrong with reflashing my BCPKG2-1-Normal-Main file with exfat modded in it... hacdiskmount via memloader did dump it with the ".bin" extension lol
would you be able to add that to Hekate ? a way to disregard if those files have an extension.
(a way to dump/reflash only one of the partitions would be cool too (or at least not the system one, which is the longest)
One more thing, when reflashing boot0/boot1, the message is the same as for other partition reflash, could you edit the text so it just says that it will flash Boot0/Boot1 instead of "the partitions that will be found" ?
thanks ^^
Last edited by Azel,
Just rename it? Don't tell me you hide the extensions? This is the worst "feature" windows has by default.or with Hekate
btw, I just did that actually, it took me a bit of time to understand what was wrong with reflashing my BCPKG2-1-Normal-Main file with exfat modded in it... hacdiskmount via memloader did dump it with the ".bin" extension lol
would you be able to add that to Hekate ? a way to disregard if those files have an extension.
(a way to dump/reflash only one of the partitions would be cool too (or at least not the system one, which is the longest)
One more thing, when reflashing boot0/boot1, the message is the same as for other partition reflash, could you edit the text so it just says that it will flash Boot0/Boot1 instead of "the partitions that will be found" ?
thanks ^^
A little note here though: You need the encrypted partition from hacdisktool to flash it via hekate.
BOOT0 and BOOT1 are seperate physical partitions of the eMMC. The message is actually correct. And it works the same way. If you want to flash only BOOT0 you add only BOOT0 in the Restore folder.
I designed it that way on purpose. ^^
yes I did rename it ^^ (no no, disabling this in windows is the 1st thing I'm doing when I install windows lol)
oh ok, makes sense! I did do that by chance then, I guess
yes, I get it, but the message being exactly the same as the other one makes it unclear on what it's going to flash, kinda, well I'm nitpicking here
oh ok, makes sense! I did do that by chance then, I guess
yes, I get it, but the message being exactly the same as the other one makes it unclear on what it's going to flash, kinda, well I'm nitpicking here
If unsure press VOL.yes I did rename it ^^ (no no, disabling this in windows is the 1st thing I'm doing when I install windows lol)
oh ok, makes sense! I did do that by chance then, I guess
yes, I get it, but the message being exactly the same as the other one makes it unclear on what it's going to flash, kinda, well I'm nitpicking here
I'm trying to save space and I don't want to add more strings. I'll revisit it though. Maybe I can save sth.
EDIT:
How's that:
Code:
gfx_puts(&gfx_con, "The mode you selected will only restore\nthe ");
if (restoreType & PART_BOOT)
gfx_puts(&gfx_con, "boot ");
gfx_puts(&gfx_con, "partitions that it can find.\n");
Last edited by CTCaer,
One question, can we change the white screen flash when booting in to cfw ? It tear my in when in the dark.
perfect ^^If unsure press VOL.
I'm trying to save space and I don't want to add more strings. I'll revisit it though. Maybe I can save sth.
EDIT:
How's that:
Code:gfx_puts(&gfx_con, "The mode you selected will only restore\nthe "); if (restoreType & PART_BOOT) gfx_puts(&gfx_con, "boot "); gfx_puts(&gfx_con, "partitions that it can find.\n");
what do you mean, press VOL ?
This is caused by nintendo's security monitor. I also hate it.
Last time I tried to do sth with it, nothing worked.
I'll check again though.
To abort if you are not sure. And then select what restore option you really need.perfect ^^
what do you mean, press VOL ?
hey CTCaer - quick question - would formatting the system that has run DevMenu and SX OS clear any logs or anything on the console so it looks clean to Nintendo? I have a NAND backup I did with some games and its 8GB (from before i ran any cfw or anything). Wondering if I can somehow cleanly redo the process by formatting and removing SX OS...etc.
Similar threads
-
-
@
SylverReZ:
@Jayro, I don't see whats so special about the DS ML, its just a DS lite in a phat shell. At least the phat model had louder speakers, whereas the lite has a much better screen.+1 -
@
SylverReZ:
They probably said "Hey, why not we combine the two together and make a 'new' DS to sell".
-
-
-
@
Veho:
Nothing special about it other than it's more comfortable than the Lite+1
for people with beefy hands. -
-
-
-
-
-
-
@
The Real Jdbye:
@SylverReZ if you could find a v5 DS ML you would have the best of both worlds since the v5 units had the same backlight brightness levels as the DS Lite unlockable with flashme -
-
-
@
BigOnYa:
A woman with no arms and no legs was sitting on a beach. A man comes along and the woman says, "I've never been hugged before." So the man feels bad and hugs her. She says "Well i've also never been kissed before." So he gives her a kiss on the cheek. She says "Well I've also never been fucked before." So the man picks her up, and throws her in the ocean and says "Now you're fucked."+1 -
-
-
@
BakerMan:
anyways, we need to re-normalize physical media+1
if i didn't want my games to be permanent, then i'd rent them -
@
BigOnYa:
Agreed, that why I try to buy all my games on disc, Xbox anyways. Switch games (which I pirate tbh) don't matter much, I stay offline 24/7 anyways.
-
-
@
cearp:
@BakerMan - you can still "own" digital media, arguably easier and better than physical since you can make copies and backups, as much as you like.
The issue is DRM -
@
cearp:
You can buy drm free games / music / ebooks, and if you keep backups of your data (like documents and family photos etc), then you shouldn't lose the game. but with a disk, your toddler could put it in the toaster and there goes your $60
-
-
@
rqkaiju2:
i like physical media because it actually feels like you own it. thats why i plan on burning music to cds
