Hacking Problem with Luma and B9S

[hack3r2507]

So installed B9S via flashcard and DS profile but when I boot now I get this error from Luma:

An error has occurred:
Failed to get Process9 data.
Press any button to shutdown.

What should I do now?

 

[DocKlokMan]

So installed B9S via flashcard and DS profile but when I boot now I get this error from Luma:

An error has occurred:
Failed to get Process9 data.
Press any button to shutdown.

What should I do now?

What firmware were you running prior to installing B9S?

 

[hack3r2507]

What firmware were you running prior to installing B9S?

I was running 4.3

 

[CrispyYoshi]

I'm not sure, but it could be because Luma doesn't support that old of a firmware.

You may need to perform a CTRNAND transfer to 9.2: https://3ds.guide/9.2.0-ctrtransfer

Alternatively, see if you can enter recovery mode (Dpad Up+L+R+A on boot) and try updating with that instead.

 

[DocKlokMan]

I was running 4.3

Are you following the guide? http://3ds.guide/

The step you want would be this one:

14. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware

Found here: https://3ds.guide/finalizing-setup

 

[hack3r2507]

I'm not sure, but it could be because Luma doesn't support that old of a firmware.

You may need to perform a CTRNAND transfer to 9.2: https://3ds.guide/9.2.0-ctrtransfer

Alternatively, see if you can enter recovery mode (Dpad Up+L+R+A on boot) and try updating with that instead.

I will try this but do I have b9s installed after that or will it be lost?

 

[hack3r2507]

Are you following the guide? http://3ds.guide/

The step you want would be this one:

14. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware

Found here: https://3ds.guide/finalizing-setup

I've already done this before because I got an error. But after this I got the error that my 3DS can not find the process9 data.

 

[CrispyYoshi]

I will try this but do I have b9s installed after that or will it be lost?

You'll keep b9s after the 9.2 ctrnand transfer. If you went the Recovery Update route, you'd still keep b9s.

 

[hack3r2507]

You'll keep b9s after the 9.2 ctrnand transfer. If you went the Recovery Update route, you'd still keep b9s.

I tried it using the recovery mode but it won't let me in. I only get the error message.

 

[CrispyYoshi]

I tried it using the recovery mode but it won't let me in. I only get the error message.

Okay, then can you try the 9.2 ctrnand transfer method?

 

[hack3r2507]

Okay, then can you try the 9.2 ctrnand transfer method?

I don't exactly know what to do. I have an 3DS XL which has Luma and b9s on it should I transfer everything to my normal 3DS via Decrypt9?

 

[CrispyYoshi]

I don't exactly know what to do. I have an 3DS XL which has Luma and b9s on it should I transfer everything to my normal 3DS via Decrypt9?

Have you checked out the link I've provided? https://3ds.guide/9.2.0-ctrtransfer

If there's a particular step confusing you, please let me know so I can clarify anything.

 

[hack3r2507]

Have you checked out the link I've provided? https://3ds.guide/9.2.0-ctrtransfer

If there's a particular step confusing you, please let me know so I can clarify anything.

Thanks I will try it later on.

 

[hack3r2507]

Have you checked out the link I've provided? https://3ds.guide/9.2.0-ctrtransfer

If there's a particular step confusing you, please let me know so I can clarify anything.

I found an old SD from my 3DS XL with A9LH and put B9S on it. Then I put it in my normal 3DS and it worked. But thanks for your help.