Hacking 2DSaver (Beta) - Fix your 2DS format brick - Testers needed

[soulkyo]

Hi, I have a question. I've put the .3dsx file on my SD, booted the homebrew launcher and entered the 2DSaver_installer but it shows as: No OOT gamecard detected! filesystem cannot init and when I try to install to any Slot it shows as Installation failure C920454F. What can I do? I do have a USA Ocarina of Time gamecard and it's properly detected by the 3ds itself, I have no free slots, that should be the problem? Thanks!

 

[ferrums]

Hi, I have a question. I've put the .3dsx file on my SD, booted the homebrew launcher and entered the 2DSaver_installer but it shows as: No OOT gamecard detected! filesystem cannot init and when I try to install to any Slot it shows as Installation failure C920454F. What can I do? I do have a USA Ocarina of Time gamecard and it's properly detected by the 3ds itself, I have no free slots, that should be the problem? Thanks!

Delete your saves and try again.
(Press X,Y,B,A when you start the game.)

 

[soulkyo]

Delete your saves and try again.
(Press X,Y,B,A when you start the game.)

I've just erased all saved data with that button combination. Same result. No OOT gamecard detected! Is it just putting that .3dsx file on the 3ds folder?
Since I couldn't find an answer I've tried to inject the payload.bin and save00.bin files onto the OOT gamecard following these steps from another page:

Spoiler

Here's what you do:

• Delete all data in the OoT Cart by following the instructions at the top of this post.
• Install Save Manager into your SD card's 3ds folder.
• Download that saveDataBackup zip file, and extract the folder to the root of your SD card. You should end up with payload.bin and save00.bin inside a saveDataBackup folder.
• From there, load Save Data Manager.
• Press B to import the save data. This will take the content from that saveDataBackup Folder on your SD card, and put it into your OoT Cart

That savedatamanager app detected the OOT gamecard and searched for that folder and injected the file, I think? I cannot try yet because my friend who's got the 2DS with the problem is coming tomorrow. Anyone knows if I'm in the right path? Thanks!

 

[werneck14]

Finally got my Powersaves and an Zelda OOT cartridge, tried today and it worked flawlessly, thanks!!

 

[ferrums]

I've just erased all saved data with that button combination. Same result. No OOT gamecard detected! Is it just putting that .3dsx file on the 3ds folder?
Since I couldn't find an answer I've tried to inject the payload.bin and save00.bin files onto the OOT gamecard following these steps from another page:

Spoiler

Here's what you do:

• Delete all data in the OoT Cart by following the instructions at the top of this post.
• Install Save Manager into your SD card's 3ds folder.
• Download that saveDataBackup zip file, and extract the folder to the root of your SD card. You should end up with payload.bin and save00.bin inside a saveDataBackup folder.
• From there, load Save Data Manager.
• Press B to import the save data. This will take the content from that saveDataBackup Folder on your SD card, and put it into your OoT Cart

That savedatamanager app detected the OOT gamecard and searched for that folder and injected the file, I think? I cannot try yet because my friend who's got the 2DS with the problem is coming tomorrow. Anyone knows if I'm in the right path? Thanks!

Sure, your in the right path!
You also can do this with JKS (export, change save00.bin and payload.bin, import).

 

[ferrums]

Not supported yet but I'll be working on it soon.

Any new thing's to know?

 

[ferrums]

Any new thing's to know?

Push

 

[zoogie]

Push

Real life has been interfering but I should have something within a week unless what I try doesn't work.

 

[grafate]

To use the 3dsx installer I just put the 3dsx, smdh and xml files in the 3ds folder. Do I need the other files like romfs or the save manager files save00 and paylaod? Asking as when just using the 3 files in the 3ds folder it says:

Opening hax save ...
Installation failed
000000001

 

[ferrums]

Real life has been interfering but I should have something within a week unless what I try doesn't work.

Nice to hear!

--------------------- MERGED ---------------------------

To use the 3dsx installer I just put the 3dsx, smdh and xml files in the 3ds folder. Do I need the other files like romfs or the save manager files save00 and paylaod? Asking as when just using the 3 files in the 3ds folder it says:

Opening hax save ...
Installation failed
000000001

/3ds/2DSaver_installer/
|-- romfs
| |-- 2DSaver.bin
| |-- chntwn
| |-- eur
| |-- jpn
| |-- kor
| `-- usa
|-- 2DSaver_installer.3dsx
|-- 2DSaver_installer.smdh
`-- 2DSaver_installer.xml

 

[Byokugen]

@zoogie my friend sends his regards, you saved his 2ds from a hammer
Also I would.like to thank you for your work! Good job!

 

[Chocas]

Hi all. Im in deep trouble... i have a EU 2ds that i tried to install cfw. Because im such an idiot and noob at this (cant remember why) i have bricked my console. Im stuck at the 3d calibration and cannot update it in recovery mode. Does this method evolving cubic ninja or ocarina of time will really work on me? Can anyone explain me what i need to do or buy like you would explain it to a child or point me to it? Ps: probably i deserve this but my poor 2ds does not
Thanks in advance

--------------------- MERGED ---------------------------

Can you help out this portuguese brother? what exactly do i need to do from the start? im stuck at the 3D calibration screen and cannot update from recovery mode. thanks in advance

 

[gamesquest1]

you either need a
a) powersaves+oot
b)a second already hacked 3ds + oot
or
c) a copy of cubic ninja

then follow the instructions from the op for your specific entry point

 

[Chocas]

Thanks for the reply gamesquest1 ! so if i buy powersaves and oot i will unbrick my 2ds for sure? im kind of poor thats why im asking because i can not afford to "throw" money away... cheers guys

 

[gamesquest1]

yeah although you may be better following my advice for the last person and seeing if someone on here can sell you a copy of oot with 2dsaver pre-installed so you don't have to waste money on a one time user item, then you can resell the cart after the fact and be pretty much square

OK it must have been a different thread I shared this idea with someone, but it's fairly simple

 

[Chocas]

what if i buy a used oot and a powersave cable? will i be able to do it myself if someone sends me the save file? thanks

 

[Chocas]

So who can sell me a oot with 2dsaver European file? and how much will it cost me? thanks for your time guys cheers !

 

[ferrums]

Hi all. Im in deep trouble... i have a EU 2ds that i tried to install cfw. Because im such an idiot and noob at this (cant remember why) i have bricked my console. Im stuck at the 3d calibration and cannot update it in recovery mode. Does this method evolving cubic ninja or ocarina of time will really work on me? Can anyone explain me what i need to do or buy like you would explain it to a child or point me to it? Ps: probably i deserve this but my poor 2ds does not
Thanks in advance

--------------------- MERGED ---------------------------

Can you help out this portuguese brother? what exactly do i need to do from the start? im stuck at the 3D calibration screen and cannot update from recovery mode. thanks in advance

What's the mset version (firmware) on your bricked ds?

--------------------- MERGED ---------------------------

Real life has been interfering but I should have something within a week unless what I try doesn't work.

Anything new? Can you make a fix for <7.0 with sighax?

 

[Chocas]

Im afraid i cant tell... I was on 11.0.2.35 when i tried to install the cfw or something like this. Do i have any salvation?

 

[Chocas]

Ferrums sry if i didnt reply in the proper place. Cheers