Official hakchi2 - NES Mini very simple pimp tool

HecklerJH · Mar 27, 2017

DR1001 said:
299MB? You must not have many .hmod files on your system. I can't seem to go over 280 without getting "out of memory" error when flashing the NES.

True. I have haven't messed with MAME or larger hmods. Though I currently have mednafen_pce, gambette, genesis_plus, mgba, snes9x2005 and snes9x2010 all installed. I have no issues so far and have been able to save my progress

Oh and a custom GUI with zelda music hack hmod. This lil NESCE is my alltime favorite system, to date!

AndyVr · Mar 27, 2017

youngtune27 said:
just figured it out bro now I have mamemini working nicely

Let me know how i can access it. [emoji6]

maande80 · Mar 27, 2017

UltraGamesFan said:
View attachment 82018

I created some new folders using a SMB3 theme with mystery boxes found in the game and a SMB3 font for the letters and symbols. Hope you enjoy!

You can download them here: https://mega.nz/#!409QDLaK!0C-9fTipBGqDvjb8--BfUuwPL0Y1u1cLWZPZ5oXfM6k

If the link doesn't work just copy and paste it into your browser.

The file is gone now. Do you mind re-upload them again? Thank you very much.

UltraGamesFan · Mar 27, 2017

I was messing around with the skin hack for my NES mini when I noticed that it looks different depending on the TV size. I have a 32 inch and 40 inch HDTV and the skin is to short or too long depending on what TV I have it hooked up to. So I guess I'll be editing a skin for one or the other. I'm not gonna upload a public skin for everyone. Bummed...

--------------------- MERGED ---------------------------

maande80 said:
The file is gone now. Do you mind re-upload them again? Thank you very much.

No problem. My bad. I moved them to another account but I couldn't update my old post.

Here you go: https://mega.nz/#!RwthQCIJ!MIo60xXUipB_LS5N5sL3D-XzYyTcZZ0iPa0YHLcgn00

If the link doesn't work directly by clicking on it then just copy and paste it into your browser.

maande80 · Mar 27, 2017

UltraGamesFan said:
I was messing around with the skin hack for my NES mini when I noticed that it looks different depending on the TV size. I have a 32 inch and 40 inch HDTV and the skin is to short or too long depending on what TV I have it hooked up to. So I guess I'll be editing a skin for one or the other. I'm not gonna upload a public skin for everyone. Bummed...

--------------------- MERGED ---------------------------

No problem. My bad sorry. I moved them to another account but I couldn't update my old post.

View attachment 82536

Here you go: https://mega.nz/#!RwthQCIJ!MIo60xXUipB_LS5N5sL3D-XzYyTcZZ0iPa0YHLcgn00

If the link doesn't work directly by clicking on it then just copy and paste it into your browser.

Downloaded! Thanks again, Man!

rhester72 · Mar 27, 2017

Desperate appeal to any Famicom Mini owners...

The content that was on filedropper from https://www.reddit.com/r/nesclassic...com_mini_superpost_the_data_drop_some_of_you/ is gone.

If you have a Famicom Mini with the latest Hakchi release and are willing to help out a bit, please PM me.

Rodney

AndyVr · Mar 27, 2017

rhester72 said:
Desperate appeal to any Famicom Mini owners...

The content that was on filedropper from https://www.reddit.com/r/nesclassic...com_mini_superpost_the_data_drop_some_of_you/ is gone.

If you have a Famicom Mini with the latest Hakchi release and are willing to help out a bit, please PM me.

Rodney

Check DM.

Cluster · Mar 27, 2017

I need help!

If you have controller that still not working on v2.14 please do the following steps:

1. Install mod with stecial debug version of controller driver (drag&drop it on hakchi2 window): http://clusterrr.com/temp/clovercon_debug.hmod
2. Turn NES Mini off.
3. Connect this controller to NES Mini (only one controller, any port).
4. Turn NES Mini on. Wait until it booted up.
5. Close hakchi2 if it's opened.
6. Download: http://clusterrr.com/temp/clovercon_getlog.zip and unpack it somewhere.
7. Run "getlog.bat" from this archive. It should create "clovercon_debug.txt" file.
8. Send this "clovercon_debug.txt" to me: [email protected]

ElMeteK · Mar 27, 2017

Hello Cluster.

Why do drag&drop of the retroarch & cores zip doesn't work with hakchi here ?

maande80 · Mar 27, 2017

Cluster said:
I need help!

If you have controller that still not working on v2.14 please do the following steps:

1. Install mod with stecial debug version of controller driver (drag&drop it on hakchi2 window): http://clusterrr.com/temp/clovercon_debug.hmod
2. Turn NES Mini off.
3. Connect this controller to NES Mini (only one controller, any port).
4. Turn NES Mini on. Wait until it booted up.
5. Close hakchi2 if it's opened.
6. Download: http://clusterrr.com/temp/clovercon_getlog.zip and unpack it somewhere.
7. Run "getlog.bat" from this archive. It should create "clovercon_debug.txt" file.
8. Send this "clovercon_debug.txt" to me: [email protected]

This shall be my homework tomorrow. I'll let you know the result ASAP, Cluster. Thank you.

NeoPolak · Mar 27, 2017

well i'm still unable to remap my Nes30 pro, even after a clean install from original dump and a system reset (my saves ): ..), so here is my debug file
only the nes30 pro was plugged on the nes classic retroreciever

Code:

Clovercon: initializing controller 0 on bus 1, gpio 195
Clovercon info: added device for controller 1
Clovercon: initializing controller 1 on bus 2, gpio 194
Clovercon: probing classic controller
Clovercon info: probed controller 1
Clovercon: Clovercon setup
poll: 84 86 86 86 00 00 FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00
con_info_data before setup: 00 00 A4 20 01 01
con_info_data after setup: 00 00 A4 20 03 01
Clovercon info: opened controller 1, controller in OK state
Clovercon: Clovercon setup
poll: 84 86 86 86 00 00 FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00
con_info_data before setup: 00 00 A4 20 03 01
con_info_data after setup: 00 00 A4 20 03 01
Clovercon info: opened controller 1, controller in OK state

the first before/after results are different, maybe that's the problem?

Cluster · Mar 27, 2017

MeteK said:
Hello Cluster.

Why do drag&drop of the retroarch & cores zip doesn't work with hakchi here ?

On which version?

NeoPolak said:
well i'm still unable to remap my Nes30 pro, even after a clean install from original dump and a system reset (my saves ): ..), so here is my debug file
only the nes30 pro was plugged on the nes classic retroreciever

Code:

Clovercon: initializing controller 0 on bus 1, gpio 195 Clovercon info: added device for controller 1 Clovercon: initializing controller 1 on bus 2, gpio 194 Clovercon: probing classic controller Clovercon info: probed controller 1 Clovercon: Clovercon setup poll: 84 86 86 86 00 00 FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00 con_info_data before setup: 00 00 A4 20 01 01 con_info_data after setup: 00 00 A4 20 03 01 Clovercon info: opened controller 1, controller in OK state Clovercon: Clovercon setup poll: 84 86 86 86 00 00 FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00 con_info_data before setup: 00 00 A4 20 03 01 con_info_data after setup: 00 00 A4 20 03 01 Clovercon info: opened controller 1, controller in OK state

the first before/after results are different, maybe that's the problem?

It's not problem, it's good.
Your controller is working? I need log from non-working very china controller.
But seems like it's hardware problem

HeisenMack · Mar 27, 2017

Does anyone know where I could get a stripped down version of Castlevania - Symphony of the night? I vaguely remember back in my PSP emu days that there was one around 50 MB.

NeoPolak · Mar 27, 2017

Cluster said:
It's not problem, it's good.
Your controller is working? I need log from non-working very china controller.
But seems like it's hardware problem

Well, it is working but i can't map inputs correctly.
In windows i have all inputs correctly mapped, but on the nes i'm unable to get more buttons than he classic nes controller.
It seems that i am the only one with that issue
I tried to mess a little with retroarch and clovercon config files, with no luck, then i got some hope with your debug post

I guess i just have to wait for a new 8bitdo firmware or their reap tool.
I love the controller but this situation makes me crazy.

HeisenMack · Mar 27, 2017

NeoPolak said:
Well, it is working but i can't map inputs correctly.
In windows i have all inputs correctly mapped, but on the nes i'm unable to get more buttons than he classic nes controller.
It seems that i am the only one with that issue
I tried to mess a little with retroarch and clovercon config files, with no luck, then i got some hope with your debug post
I guess i just have to wait for a new 8bitdo firmware or their reap tool.
I love the controller but this situation makes me crazy.

Hi @NeoPolak, here's what I posted before:

What worked for me was upgrading the NES30 pro with the 1.73beta0 found here:
http://forum.8bitdo.com/forum.php?mod=attachment&aid=NTM1fGFhYWRhNzczfDE0OTAzMDMzNTN8MHwxMTc5

I then upgraded the Retro Receiver's firmware to 1.05beta3 found here:
http://download.8bitdo.com/Tools/Receiver/NesMini/8Bitdo_NesMini_RR_Firmware_V105_beta3.zip

I didn't need to remap any buttons, they all worked as expected (i.e. X = X, Y = Y, L and R = L and R) . The only thing I needed to do was remap the D-pad. Analog sticks work fine too, although they are a tad too sensitive.

What is the firmware installed for your NES30 Pro and Retro Receiver? It's important that you have the proper firmware installed otherwise it won't work.

The 1.05beta3 for the Retro Receiver makes it so it recognizes the extra buttons for what they are (and not turbo buttons). The 1.73beta0 firmware for the NES30 Pro makes it work properly with the Receiver. The ONLY thing i had to do in Retroarch was remap the directional pad. Everything else worked fine.

NeoPolak · Mar 27, 2017

HeisenMack said:
Hi @NeoPolak, here's what I posted before:

What worked for me was upgrading the NES30 pro with the 1.73beta0 found here:
http://forum.8bitdo.com/forum.php?mod=attachment&aid=NTM1fGFhYWRhNzczfDE0OTAzMDMzNTN8MHwxMTc5

I then upgraded the Retro Receiver's firmware to 1.05beta3 found here:
http://download.8bitdo.com/Tools/Receiver/NesMini/8Bitdo_NesMini_RR_Firmware_V105_beta3.zip

I didn't need to remap any buttons, they all worked as expected (i.e. X = X, Y = Y, L and R = L and R) . The only thing I needed to do was remap the D-pad. Analog sticks work fine too, although they are a tad too sensitive.

What is the firmware installed for your NES30 Pro and Retro Receiver? It's important that you have the proper firmware installed otherwise it won't work.

The 1.05beta3 for the Retro Receiver makes it so it recognizes the extra buttons for what they are (and not turbo buttons). The 1.73beta0 firmware for the NES30 Pro makes it work properly with the Receiver. The ONLY thing i had to do in Retroarch was remap the directional pad. Everything else worked fine.

Yes, i know, i saw your posts, and i keep posting that it doesn't work.
here what my mapping looks like
and what i've done

Before mapping

After mapping

santamanga · Mar 27, 2017

DR1001 said:
299MB? You must not have many .hmod files on your system. I can't seem to go over 280 without getting "out of memory" error when flashing the NES.

Don´t worry, me too. After about 286 I get an error. And I have not many cores installed: fb_alpha + neogeo bios, dosbox, genesis_plus_gx, mame2003 (no additional bios), retroarch and snes9x2005

Bosco82 · Mar 27, 2017

You have to use the 1.05 beta 0 firmware for the receiver the beta 3 firmware sets x and y to turbo and wont let you reset them right.

NeoPolak · Mar 27, 2017

Bosco82 said:
You have to use the 1.05 beta 0 firmware for the receiver the beta 3 firmware sets x and y to turbo and wont let you reset them right.

i'm gonna eat my hairs!!!!! i was preparing candles, some incense sticks and a newborn for a sacrifice for the glory of satan
Then i saw your post and wanted to prove that it doesn't work too, because i did exactly the same thing last week and it doesn't worked. But hey, this time it worked :grog:

I'm becoming insane

I can finally use L2 R2 for savestates :gba:

But i'm still unable to map L3 R3, they are not recognized, but hey it's a better situation than before

now i have to do the same with my 2nd controller to see if it wasn't just a lucky try

so RR is on 1.05beta0
and the nes30 pro is on v2.0

ByteThis · Mar 27, 2017

Cluster said:
I need help!

If you have controller that still not working on v2.14 please do the following steps:

1. Install mod with stecial debug version of controller driver (drag&drop it on hakchi2 window): http://clusterrr.com/temp/clovercon_debug.hmod
2. Turn NES Mini off.
3. Connect this controller to NES Mini (only one controller, any port).
4. Turn NES Mini on. Wait until it booted up.
5. Close hakchi2 if it's opened.
6. Download: http://clusterrr.com/temp/clovercon_getlog.zip and unpack it somewhere.
7. Run "getlog.bat" from this archive. It should create "clovercon_debug.txt" file.
8. Send this "clovercon_debug.txt" to me: [email protected]

E-mail sent with results!

Official hakchi2 - NES Mini very simple pimp tool

Well-Known Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Similar threads

Popular threads in this forum