Hacking BotW Item Names for PandaOnSmack's Trainer

TheWord21

Well-Known Member
Member
Joined
Jun 8, 2014
Messages
811
Trophies
0
Age
30
XP
398
Country
United States
I get this error while trying to connect to wiiu :
Impossible de lire les données de la connexion de transport : Une tentative de connexion a échoué car le parti connecté n’a pas répondu convenablement au-delà d’une certaine durée ou une connexion établie a échoué car l’hôte de connexion n’a pas répondu. à System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
à BotwTrainer.TcpConn.Read(Byte[] buffer, UInt32 nobytes, UInt32& bytesRead)
à BotwTrainer.Gecko.GetServerStatus()
à BotwTrainer.MainWindow.ConnectClick(Object sender, RoutedEventArgs e)

It's in french and at the beggining it says that console didn't answered after a time
Do you have a solution ? Thanks for answers.

Have you tried turning Avast! or any anti-virus software off before connecting...?
 

TheWord21

Well-Known Member
Member
Joined
Jun 8, 2014
Messages
811
Trophies
0
Age
30
XP
398
Country
United States
Oh ! What a noob, i forgot to do this ^^
Thank you ^^

No problem...

Now, to everyone else... I think it needs to be made known, so...
PLEASE MAKE SURE YOUR ANTI-VIRUS SOFTWARE IS EITHER OFF OR DISABLED BEFORE YOU ATTEMPT TO CONNECT THE TRAINER TO THE WII U. THIS MIGHT BE THE REASON YOUR ATTEMPTS AT CONNECTING THE TRAINER TO THE WII U FAIL WHEN INITIALLY CONNECTING.
That is all.
 
Last edited by TheWord21, , Reason: Redundant statement.

RemixDeluxe

Well-Known Member
Member
Joined
Nov 23, 2010
Messages
4,583
Trophies
0
XP
2,525
Country
United States
I'm guilty of that, too.
What really attracted me to it at first was how gaming friendly it was and how it works silently in the background (I remember at first that loud robotic voice that scares me, turned it off asap) but it just fails at finding potential threats and when it does take out the bad stuff it doesnt clean up the traces (at least for me it didnt) and for what it does its really not resource friendly.

For everyone here take a read at this article and pick a new anti virus. If you need a personal suggestion my vote goes to bitdefender alongside malwarebytes.

http://www.pcgamer.com/best-anti-virus/
 

Uziumi

Well-Known Member
Newcomer
Joined
Apr 9, 2011
Messages
87
Trophies
1
XP
156
Country
United States
Okay can someone here please tell me how to get the trainer to work if you have no antivirus whatsoever?
 

Benoit934

Well-Known Member
Member
Joined
Oct 31, 2016
Messages
129
Trophies
0
Age
31
XP
150
Country
France
Stats are set by the horse ID number. The only things u can change is the Reins, Saddle and the Mane.

GameRomHorse00S I want to think is the lord of the mountain but since there is no Saddle to be put on the horse it freezes the game when trying to load it from the stable . Same with Nushi and the Bone. Bone would be the skeleton horse.

The stats is not linked to the Horse ID, when the actor is created it's the case but when it saved in the saddle the horses stats are in the game save, you may change the 3D Model independently from the stats.

The save game have a kind of binary encoding, like the bxml (AAMP) files but i don't know how I may decode thoses files, there is a file inside the game data that describe how the save is formated but did not search.

There is only 5 horses and the data is formated like pointer to pointer so we just need to know the size of the data (64 bytes for strings) and search for a 5 entry array then edit that.
 
  • Like
Reactions: Magnus Hydra

Uziumi

Well-Known Member
Newcomer
Joined
Apr 9, 2011
Messages
87
Trophies
1
XP
156
Country
United States
Sure. But, it would kinda help if you'd tell us what's wrong with the trainer, y'know?

It doesn't work. It never worked. It refuses to ever work.
Edit durability, it errors.
Edit an item ID, it errors.
Edit an item value, it errors.
I never tried applying codes, but I guess it would error too.

I have no antivirus, My .NET is up to date, I use the files from the Gecko U updater from Bully.
Why is it BotW Trainer never once ever worked for me?

I always get this error and it's pissing me off now...

Code
I/O error occurred. at BotwTrainer.Gecko.ReadBytes(UInt32 address, UInt32 length)
at BotwTrainer.Gecko.GetString(UInt32 address)
at BotwTrainer.MainWindow.DebugData()
 

TheWord21

Well-Known Member
Member
Joined
Jun 8, 2014
Messages
811
Trophies
0
Age
30
XP
398
Country
United States
It doesn't work. It never worked. It refuses to ever work.
Edit durability, it errors.
Edit an item ID, it errors.
Edit an item value, it errors.
I never tried applying codes, but I guess it would error too.

I have no antivirus, My .NET is up to date, I use the files from the Gecko U updater from Bully.
Why is it BotW Trainer never once ever worked for me?

I always get this error and it's pissing me off now...

Code
I/O error occurred. at BotwTrainer.Gecko.ReadBytes(UInt32 address, UInt32 length)
at BotwTrainer.Gecko.GetString(UInt32 address)
at BotwTrainer.MainWindow.DebugData()

I see... well, when you open up Homebrew and you go to TCPGecko from the internet browser on the Wii U... do you press "A" or "X" at that screen? Because, you're supposed to Press X. If that's not it, I'm not sure what the problem is.
 

Uziumi

Well-Known Member
Newcomer
Joined
Apr 9, 2011
Messages
87
Trophies
1
XP
156
Country
United States
I see... well, when you open up Homebrew and you go to TCPGecko from the internet browser on the Wii U... do you press "A" or "X" at that screen? Because, you're supposed to Press X. If that's not it, I'm not sure what the problem is.

I press X to load the .bin, yes. Breath.exe needs it and it worked flawlessly since day 1.
The problem is it only have 30 item slots, can't modify items or anything. I use Breath.exe for codes as at least it works.

Dunno, does jgecko u work?

The memory viewer and searching works. I've been slowly manually editing my items to max through JGecko U's memory viewer after searching the values of items. Problem is I don't know how to do such a thing if I only have one of an item. 2 I do. Not sure how else to use JGecko U.
 

JohnathanMonkey

Well-Known Member
Member
Joined
Apr 26, 2013
Messages
633
Trophies
1
Age
36
XP
744
Country
United States
I see... well, when you open up Homebrew and you go to TCPGecko from the internet browser on the Wii U... do you press "A" or "X" at that screen? Because, you're supposed to Press X. If that's not it, I'm not sure what the problem is.

I press A and it works just fine. Just an fyi for anyone who was curious.
 

EclipseSin

Ignorant Wizard
Member
Joined
Apr 1, 2015
Messages
2,063
Trophies
0
Age
35
Location
221b Baker Street
XP
1,726
Country
United Kingdom
I didn't read every page here, but if you have junk bows, swords, or shields to drop, you can make them heart containers.

Find the weapon you wish to drop using the trainer, open the command window on the game and highlight drop but do not click it yet.

Change the item to Obj_HeartUtuwa_A_01 and click save

Now hit the drop button. Enjoy eating another heart. Should also work for Stamina Vessel ( Obj_StaminaUtuwa_A_01 )


It makes me wonder (since I havent tried) if we can spawn other objects like this lol
 
Last edited by EclipseSin,

TheWord21

Well-Known Member
Member
Joined
Jun 8, 2014
Messages
811
Trophies
0
Age
30
XP
398
Country
United States
I didn't read every page here, but if you have junk bows, swords, or shields to drop, you can make them heart containers.

Find the weapon you wish to drop using the trainer, open the command window on the game and highlight drop but do not click it yet.

Change the item to Obj_HeartUtuwa_A_01 and click save

Now hit the drop button. Enjoy eating another heart. Should also work for Stamina Vessel ( Obj_StaminaUtuwa_A_01 )


It makes me wonder (since I havent tried) if we can spawn other objects like this lol

How'd you find out the names of the Heart Container and Stamina Vessels?
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    AncientBoi @ AncientBoi: ¡¡¡ tttoN