Homebrew Official Retroarch WiiU (wip.)

  • Thread starter Thread starter aliaspider
  • Start date Start date
  • Views Views 2,653,387
  • Replies Replies 15,185
  • Likes Likes 93
Buildbot 2016-11-16

CPS1:
Working! (tested with: Final Fight, Street Fighter II, 3 Wonders, Carrier Air Wing) **
CPS2: Working! (tested with: 1944, M vs. C, SSF II Turbo, XM vs. SF, Marvel Super Heroes, SF Alpha 1-2-3)
CPS3: Working! (tested with: SF III: 2nd Impact-Third Strike, Jojo's Venture, Jojo's Bizarre Adventure, Red Earth, Warzard)
FBA 2012: Won't load fully in the Homebrew Launcher (size limit)
Neo Geo: Working! (tested with: Art of Fighting 3, Fatal Fury 3, KoF 2003, The Last Blade 1-2, Metal Slug 4-5, SVC Chaos Super Plus)
GenesisPlus GX: Working! Sega 1000, Master System, Genesis, and Sega CD, all perfect!
MAME2003 Midway: Working! (tested with: Mortal Kombat I - II - 3 - Ultimate, NBA Jam, NBA Jam Tournament Edition, NBA Maximum Hang Time)
Mednafen NGP: Only loads a white screen (tested with 2 games)
Mednafen VB: Working!
Mednafen PCE Fast: Working! PC Engine and TurboGrafx CD, all perfect.
Mednafen SuperGrafx: Working!
Mednafen Wswan: Working!
Snes9X: Working!

Untested, previous status was:

FCEUMM: Working! ***
Gambatte: Exception Type DSI Error, CODE DUMP.
Mednafen Lynx: Exception Type DSI Error, CODE DUMP.
mGBA: Working! GB - GBC - GBA ****
Nestopia: Exception Type DSI Error, CODE DUMP.
Quicknes: Working! *****
Snes9x 2010: Working, though it crashes some secs after the game starts. Your mileage may vary.


- HW Bilinear Filtering / Aspect Ratio Index working correctly.
- Right Analog mapping.
- Dip switches working.


** hangs after loading more than 1 game.
*** hangs after loading more than 3 games.
**** hangs if you load any other game after a GB - GBC ROM.
***** hangs after loading more than 2 games.
 
Last edited by niuus,
Buildbot 2016-11-16

CPS1:
Working! (tested with: Final Fight, Street Fighter II, 3 Wonders, Carrier Air Wing) **
CPS2: Working! (tested with: 1944, M vs. C, SSF II Turbo, XM vs. SF, Marvel Super Heroes, SF Alpha 1-2-3)
CPS3: Working! (tested with: SF III: 2nd Impact-Third Strike, Jojo's Venture, Jojo's Bizarre Adventure, Red Earth, Warzard)
FBA 2012: Won't load fully in the Homebrew Launcher (size limit)
Neo Geo:
Working! (tested with: Art of Fighting 3, Fatal Fury 3, KoF 2003, The Last Blade 1-2, Metal Slug 4-5, SVC Chaos Super Plus)
GenesisPlus GX: Working! Sega 1000, Master System, Genesis, and Sega CD, all perfect!
MAME2003 Midway: Working! (tested with: Mortal Kombat I - II - 3 - Ultimate, NBA Jam, NBA Jam Tournament Edition, NBA Maximum Hang Time)
Mednafen NGP: Only loads a white screen (tested with 2 games)
Mednafen VB: Working!
Mednafen PCE Fast: Working! PC Engine and TurboGrafx CD, all perfect.
Mednafen SuperGrafx: Working!
Mednafen Wswan: Working!
Snes9X: Working!

Untested, previous status was:

FCEUMM: Working! ***
Gambatte: Exception Type DSI Error, CODE DUMP.
Mednafen Lynx: Exception Type DSI Error, CODE DUMP.
mGBA: Working! GB - GBC - GBA ****
Nestopia: Exception Type DSI Error, CODE DUMP.
Quicknes: Working! *****
Snes9x 2010: Working, though it crashes some secs after the game starts. Your mileage may vary.


- HW Bilinear Filtering / Aspect Ratio Index working correctly.
- Right Analog mapping.
- Dip switches working.


** hangs after loading more than 1 game.
*** hangs after loading more than 3 games.
**** hangs if you load any other game after a GB - GBC ROM.
***** hangs after loading more than 2 games.


Thanks for testing :)

The FBA 2012 core works fine as long as you use Homebrew Launcher 1.4 with the new 551HBL.mp4 (self host for now) iv'e asked one of the guys from loadiine.ovh to updtae the site..
 
Last edited by ploggy,
After using this emulators, I am having a problem with my 8gb sd card, when I connect it to my pc it disconnect. Did someone else have the same problem?
 
Are you sure your using the new MP4?

from here:
https://github.com/dimok789/homebrew_launcher/releases
Told you, i'm using both. I am self-hosting it, too. Runs out of memory. Will probably be sorted out once RPX works without issues, we'll see. I'll test 11-17 or 11-18 tonight.
@niuus How did you get CPS3 games working? They don't work for me, at all
Wouldn't know what to recommend besides using the correct roms for that version. Test them on FBA PC first (this is what i always do to be sure) so you have 99% certainty that they will work.
 
Last edited by niuus,
  • Like
Reactions: Azel
FYI, I got the out of memory error too the first time but I had been loading other things before. Trying fba straight after a fresh reboot worked fine.
 
Buildbot 2016-11-16

CPS1:
Working! (tested with: Final Fight, Street Fighter II, 3 Wonders, Carrier Air Wing) **
CPS2: Working! (tested with: 1944, M vs. C, SSF II Turbo, XM vs. SF, Marvel Super Heroes, SF Alpha 1-2-3)
CPS3: Working! (tested with: SF III: 2nd Impact-Third Strike, Jojo's Venture, Jojo's Bizarre Adventure, Red Earth, Warzard)
FBA 2012: Won't load fully in the Homebrew Launcher (size limit)
Neo Geo: Working! (tested with: Art of Fighting 3, Fatal Fury 3, KoF 2003, The Last Blade 1-2, Metal Slug 4-5, SVC Chaos Super Plus)
GenesisPlus GX: Working! Sega 1000, Master System, Genesis, and Sega CD, all perfect!
MAME2003 Midway: Working! (tested with: Mortal Kombat I - II - 3 - Ultimate, NBA Jam, NBA Jam Tournament Edition, NBA Maximum Hang Time)
Mednafen NGP: Only loads a white screen (tested with 2 games)
Mednafen VB: Working!
Mednafen PCE Fast: Working! PC Engine and TurboGrafx CD, all perfect.
Mednafen SuperGrafx: Working!
Mednafen Wswan: Working!
Snes9X: Working!

Untested, previous status was:

FCEUMM: Working! ***
Gambatte: Exception Type DSI Error, CODE DUMP.
Mednafen Lynx: Exception Type DSI Error, CODE DUMP.
mGBA: Working! GB - GBC - GBA ****
Nestopia: Exception Type DSI Error, CODE DUMP.
Quicknes: Working! *****
Snes9x 2010: Working, though it crashes some secs after the game starts. Your mileage may vary.


- HW Bilinear Filtering / Aspect Ratio Index working correctly.
- Right Analog mapping.
- Dip switches working.


** hangs after loading more than 1 game.
*** hangs after loading more than 3 games.
**** hangs if you load any other game after a GB - GBC ROM.
***** hangs after loading more than 2 games.
OK so you say dip switches work for cps 1/2/3 how do you use them as I can't get to the dip switch menu
 
OK so you say dip switches work for cps 1/2/3 how do you use them as I can't get to the dip switch menu
They have been working since day one, i believe. Depending on the core, it could be inside the Quick Menu>Options, or inside the Input configuration.
 
  • Like
Reactions: AmandaRose
For those having issues with Snes9x 2010, I recommend Snes9x 1.53 mainline core, runs perfectly and shouldn't crash as much as the 2010 core, never had a crash ever since it started working.
 
Just for giggles I decided to test Retroarch on my other WiiU (32gb Model) to see if Model played apart in compatibility and so far everything that worked on my 8gb works on my 32gb :)
 
  • Like
Reactions: the_randomizer
Just for giggles I decided to test Retroarch on my other WiiU (32gb Model) to see if Model played apart in compatibility and so far everything that worked on my 8gb works on my 32gb :)
LOL why would it not work they are exactly the same apart from the storage size.
 
  • Like
Reactions: niuus
LOL why would it not work they are exactly the same apart from the storage size.
He just wanted to be sure if the core compatibility issues that many have been having could be due to different consoles or something else.
At least this makes us know that the issues might be related to the SD card setup and not the console itself.
 
  • Like
Reactions: ploggy
LOL why would it not work they are exactly the same apart from the storage size.
He just wanted to be sure if the core compatibility issues that many have been having could be due to different consoles or something else.
At least this makes us know that the issues might be related to the SD card setup and not the console itself.
It is the same console. Not even the Gamecube nor the Wii ever differed in compatibility.
 
CPS1/2/3 romsets are fully working on the rxp version of FBA 2012 :) I think we don't need the other cores anymore [emoji14]
 

Site & Scene News

Popular threads in this forum