If you don't have a backup, it's dead. Sorry. Have you tried taking out the sd card? Also, did you have an emunand?
Hacking 3DS unbricking progress
- Thread starter krisztian1997
- Start date
- Views 350,168
- Replies 1,233
- Likes 32
You could try backing up emuNAND which should still be ok and flashing it to sysNAND through a hardmod and hope that fixes the problem. That's basically what we do with the a9lh process of getting sysNAND to 2.1, so it's probably compatible.
1. Use this tool to extract your emuNAND from your sd card.
2. Hardmod your 3ds
3. Flash the emuNAND backup to sysNAND
4. Hope it works or you've just wasted some money
and tell me , my emunand was at 10.7 , and my sysnand was in 9.2 , is that by doing so , my device pelomenos back to boot ?
I do not care it get updated , just like it is working .
had the same problem with robertorpg94's. managed to hardmod the 10.7 emunand, it booted up. the problem is it keeps getting stuck at the first cia installation using plaisysudater.
already tried patching the native firm and used safesysupdater and sysupdater 0.42b, still getting stuck at the fir cia installation.
already tried patching the native firm and used safesysupdater and sysupdater 0.42b, still getting stuck at the fir cia installation.
hello
i try to unbrick one of my 3ds
this one was bricked 2 years ago by 3dslink
after several test with arduino without result (2 years)
i have buy a pi zero
but this one refuse to boot with the linux spillpass img
which come with with RPU
(boot rasbian, noob...so the card is ok)
need help
the micro sd is not a problem (there are pads on the rear of the board
thank
i try to unbrick one of my 3ds
this one was bricked 2 years ago by 3dslink
after several test with arduino without result (2 years)
i have buy a pi zero
but this one refuse to boot with the linux spillpass img
which come with with RPU
(boot rasbian, noob...so the card is ok)
need help
the micro sd is not a problem (there are pads on the rear of the board
thank
It works only with 1st model Raspberry Pi, i tried to make it work with a RPi2 but even with a patched kernel, i couldn't make it work. So yeah either find a RPi1 or make it done by someone else with one (i can do it if you're ok with shipping it)
it's done
take the rasbian jessy lite img from raspbian org
replace kernel.img and comdline.txt whith the one of rpu linux image (for the sd card)
keep rpu linux image for the usb stick
plug the otg cable on the pi zero
my stick was only reconise (sda2) using a 1$ chinesse hub (round with 4 ports)
my old usb2 keybaord don't run use a wireless one
work a the firts time
the bootcode or start.elf in rpu image seem not working whit pi zero
a+
take the rasbian jessy lite img from raspbian org
replace kernel.img and comdline.txt whith the one of rpu linux image (for the sd card)
keep rpu linux image for the usb stick
plug the otg cable on the pi zero
my stick was only reconise (sda2) using a 1$ chinesse hub (round with 4 ports)
my old usb2 keybaord don't run use a wireless one
work a the firts time
the bootcode or start.elf in rpu image seem not working whit pi zero
a+
hello friends I update my 3ds 4.2 to 9.2 and restart but got black screen have the backup of the nand made processes for hardmod but he does not recognize the nand on pc wires are soldered perfectly and nothing partition appear
Either soldering issue or your sd adapter is not compatible. Check the hardmod thread for a list of verified readers.
already tested with SD reader Sandisk Kingston tested with SD and USB No player 'm finding that nand this fire because it does not recognize .
The strange that he is with black screen
now I caught a sd reader samsung
The strange that he is with black screen
now I caught a sd reader samsung
Hey guys so I have been reading about unbricking and I have a question. I'm about to buy a O3DS and the info I have is that it was taken to a computer shop to get the battery replaced. The owner never came to pick it up. And they sell it but it has this error
3DS error 8046
error code 00F800FE
00000000 00000000 00000200 00000000
Can I fix the 3ds with this method soldering a card reader and that stuff or the 3DS is dead and I should just look for another one?
I think the 3ds was never modded or anything.
3DS error 8046
error code 00F800FE
00000000 00000000 00000200 00000000
Can I fix the 3ds with this method soldering a card reader and that stuff or the 3DS is dead and I should just look for another one?
I think the 3ds was never modded or anything.
Last edited by Robika,
If it gives that error when it was never attempted to mod, you'd better stay away from it. The unbricking method, as far as I know, only works when you have a dump from the working 3DS and I highly doubt that you can find that on the SD-card (if it's still present). And when errors like this occur "spontaneously", it might well be that there's something wrong with the nand or RAM memory. Better safe then sorry, unless you can get it very cheap and you can use the parts.
It would cost me 30€ I don't know if the SD is inside maybe yes the guys from the shop never tried to fix it. How often does taking the battery out and putting it back fix this?
I'm gonna guess that never has taking the battery out and replacing it fixed a boot rom error. Save your money, it's not happening. Sorry.
Sent from my A0001 using Tapatalk
- No one is chatting at the moment.
-
-
-
@
BakerMan:
Update on my brother: He's home now, tired and hungry, obviously, but other than that, seems to be doing fine.+2 -
-
-
@
BakerMan:
Well, from what I've heard from my parents, he had a seizure last night, perhaps an epileptic episode, fucking died, had a near death experience, my dad called the paramedics, they showed up, took him to the hospital, and he woke up covered in tubes, and started complaining.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
