Hacking 11.1.0-34 firmware update out

[LysergCooltyp]

In theory, but for now no since it isn"t a working Homebrew Entry Point for the moment. You need to wait the fix of all of them first.
@LysergCooltyp If the console are in 10.7.0-32 you need to block DNS, or in your router or other possible way the servers to don"t trigger the Internet Browser nag. If is in 11.0.0-33 System Transfer needs that the console is in lastest Firmware.

I'm using 'chncdcks' dns to block updates on my wii u. Will that be sufficient on the 3DS as well or do i need to use a different service?

If by that you're asking whether or not a New 3DS XL will make a difference, then no. In fact, you're probably better off with one of those. If it's lower than 11.0, even better. Mine was when I bought it earlier in the year but I had to update to do the system transfer. I didn't think to look into hacking it before that because I thought it would interfere with the transfer (it probably wouldn't, from my understanding). I feel so dumb now, so I'm not updating beyond 11.0 until I can hack it fully.

Yeah, that was pretty much my question. While loosely reading the topic some people saying you couldn't downgrade anymore or that you could brick your console, so the confirmation that i'm not screwed makes me feel comfortable again.

It's gonna be my first 3DS, so I think system transfers don't apply to me fortunately.

 

[Clector]

@Andy84 Gateway mode seems to be broken for now you need to wait them to fix it. Do you have any Nand backups? If not I suposse you can make one of the actual one ticket.db and movable.sed if Nands are unlinked with Decrypt9, backup your System nand restore your System Nand to the EmuNand and then update manually to at maxium 11.0.0-X and finally restore the previous ticket.db and movable.sed with Decrypt9.
@Aqib Ali Yes, you need NTR for do that.
@LysergCooltyp No, the browser nag servers are different, try with this: https://gbatemp.net/threads/blocking-browserhax-update-message.401280/

 

[Andy84]

If u have no 11.0 backup your fucked

I am afraid I have no backup mate.

 

[leonmagnus99]

can confirm that 11.1 on A9LH is fine my games and homebrew work fine. But my gateway is broken now I can go into gateway menu by holding up on boot but when i go into gateway mode my installed cia games are gone and select button does nothing. So gateway A9LH users Don't Update!! Can I go back easily? to 11.0

many thanks for the info.

i wont be updating, until GW works again. (i need it at times XD)

 

[Deleted User]

I have (V*)hax. Is it safe to Update my New 3DS XL and use (V*)hax's self-updating hax Payload feature?

 

[ihaveahax]

I have (V*)hax. Is it safe to Update my New 3DS XL and use (V*)hax's self-updating hax Payload feature?

no, *hax doesn't work. you should just stay on 11.0 and use ctr-httpwn for online/eshop.

 

[Clector]

@RosaliinaDaHacker64 No, all *hax needs to be updated to work in 11.1.0-X, so if you update now you won"t be bale to use it until a new payload is launched, so wait a little of time until it is fixed. You can use ctr-httpwn for Oline services meanwhile.

 

[djalmafreestyler]

NTRCFW is working on a9lh 11.1?

 

[Clector]

@djalmafreestyler No, it isn"t even seems to work with an older NATIVE_FIRM file, I wonder why? I think I will see more things of the update later.

 

[Shadow#1]

NTRCFW is working on a9lh 11.1?

No

 

[akanesaki31]

U don't change emunand at all just the cfw u need to get Luma3DS

Please use a newer CFW that isn't dead
gbatemp.net/threads/faq-what-cfw-is-best-for-me.428509/

CFW's are only a means of reading the NAND, not writing to it. You can change CFW's on the fly without effecting your NANDS.

I'm confusing about those steps ) and i decided to stick with my lovely old Rxtools <3

 

[astronautlevel]

Also AstronautLevel2 needs to update his BootNTR.cia file for 11.1 support for New/Old 3DS models.

I wasn't the one to update NTR last time (though I have a pretty good idea on how to), it was Steveice10 who updated for 11.0 NFIRM support. I'll see if I can do it if he doesn't, but I'm super busy with IRL stuff right now.

@djalmafreestyler No, it isn"t even seems to work with an older NATIVE_FIRM file, I wonder why? I think I will see more things of the update later.

It needs an update for its home menu code.

 

[Deleted User]

no, *hax doesn't work. you should just stay on 11.0 and use ctr-httpwn for online/eshop.

@RosaliinaDaHacker64 No, all *hax needs to be updated to work in 11.1.0-X, so if you update now you won"t be bale to use it until a new payload is launched, so wait a little of time until it is fixed. You can use ctr-httpwn for Oline services meanwhile.

Ok, I'm not even updating atm... Thanks.

 

[Shadow#1]

I'm confusing about those steps ) and i decided to stick with my lovely old Rxtools <3

What method u using to boot rxTools?

 

[itsjch]

To be safe dont update till we know everything their is needed to know!

 

[ihaveahax]

I'm confusing about those steps ) and i decided to stick with my lovely old Rxtools <3

consider https://github.com/Plailect/Guide/wiki for setting up Luma3DS + arm9loaderhax. it's easier and quicker than it seems.

if you're using menuhax, you can quickly switch by putting "Luma3DS.dat" and pointing any boot manager to that instead of "rxTools/sys/code.bin" (same offset 0x12000). if you don't have a boot manager, put the "Luma3DS" folder from "3ds" to the "3ds" folder on your SD card. https://github.com/AuroraWright/Luma3DS/releases

 

[akanesaki31]

What method u using to boot rxTools?

i'm using browser URL code hahaha

 

[Shadow#1]

i'm using browser URL code hahaha

ROTFLMFAO

 

[Clector]

I think other CFW"s also are comaptible with launching them from the Internet Browser in comaptible versions.

 

[607jfxd]

No SD Card A9LH/Mini CFW Is Fine Updated On N3DS