You can use NTR CFW with Luma3DS
But how would that work, since they are both CFW? And how do i install it?
Here ya go, good ol' Plailect's guide.I can't really find the guide. Also, is a9lh required? Because i don't want to risk bricking my 3ds..
It's at the last steps. Check Part 5, & scroll down on how to install NTR within Luma3DS.How does that guide help me? There is nothing there about NTR and how to install it?
It's at the last steps. Check Part 5, & scroll down on how to install NTR within Luma3DS.
This is important, remember to have the firmware.bin in the luma folder and on Luma's settings the (sysnand is updated) bit... check that off, it messes with how ntr reads firmware. I dealt with this annoying problem for a good hour yesterday.
Actually, simply installing the .cia file is everything necessary to get NTR working. Those extra steps are actually when you're using A9LH; but now that you mentioned that you're using Menuhax, I don't think the .bin files are necessary. Install the .cia, run it, and see if it works. If you press X+Y in the home menu after finishing booting NTR, a menu should pop up. That's proof that it's working properly.I don't have a firmware.bin file in the Luna map. I do have a firmware.bin on my root, is that what you mean?
Also, is it really that simple as to move the NTR.bin to the root of SD, install the NTR.cia file, and launch it? (im on 9.0 Sys and 11.0 Emu) Nothing fancy done to my 3ds, except install Luma3DS and Menuhax.
There is a Luma wiki and it has a link for a 10.2 firmware.bin file that you have to put in the Luma folder on your SD card.I don't have a firmware.bin file in the Luna map. I do have a firmware.bin on my root, is that what you mean?
Actually, simply installing the .cia file is everything necessary to get NTR working. Those extra steps are actually when you're using A9LH; but now that you mentioned that you're using Menuhax, I don't think the .bin files are necessary. Install the .cia, run it, and see if it works. If you press X+Y in the home menu after finishing booting NTR, a menu should pop up. That's proof that it's working properly.
BootNTR 2.4
unknown FIRM, acess-checks could not be
patched
Hm...looks like you're gonna need those .bin files anyway. Just like @ishygdaft, get the firmware.bin file from the site.I copied the Cia on my SD, and ran it on emunand. It won't work. I get the error:
BootNTR 2.4
tmpBuffer: 1418a000
IsNew3DS: 0
firmversion: 00000000
param is missing: ntrConfig->PMSvcRunAdd
r
testing svc_backDoor
testSvcbackdoor OK
unknown FIRM, acess-checks could not be
patched
InterProcessDmaFinishState: fff04404
copyRemoteMemory/controlProcessMemory OK
0x00200000 in HomeMenu: ea00001f
open ntr.bin failed
bnBootNTR failed
Press home button to return to the menu
Hm...looks like you're gonna need those .bin files anyway. Just like @ishygdaft, get the firmware.bin file from the site. I also recommend downloading this .zip file (this is the latest build of NTR), & put the ntr.bin file in the root of the SD card. I say this because it also says in the error: open ntr.bin failed; so maybe that file can help.
Oh, right. Good eye. That build is New 3DS only, so that wouldn't end well. This one should be the best one for him then.He also seems to have an o3ds, are you sure the preview is the right thing to give him? I've heard mixed reports that that works on the o3ds but I'm to lazy to confirm it myself