Hacking A few questions - offline exploits

SomecallmeBerto

The Anti-Hero
OP
Member
Joined
Dec 17, 2014
Messages
1,097
Trophies
0
Age
32
Location
USA
XP
646
Country
United States
Hello all,

I got a few questions and I hope you can help me.

I have my N3DS setup and in order to access hombrew(emunand) I must use browserhax. However this NEEDS an internet connection and a website to stay up which are two points of failures.

My question is if I were to use the Zelda OoT hack would I still need an internet connection or yellow8's site? If not do you know if the Nintendo select versions of the game have been patched or not?
 

ih8ih8sn0w

Koreaboo
Member
Joined
Aug 22, 2015
Messages
1,677
Trophies
0
Age
25
Location
Hell
XP
898
Country
United States
You have to use an external exploit at least once to install the save file. No version of OoT has been patched so far outside of 11.0s patch. If you want a better entrypoint, and are on 10.7 or lower, you can use the homebrew loader cia from yellows8. (you can probably find a download for the payloads somewhere else if not, and im not sure if the payloads are the same for each fw) Hold x and y to download and save the payload to your sd card when launching it.
 

SomecallmeBerto

The Anti-Hero
OP
Member
Joined
Dec 17, 2014
Messages
1,097
Trophies
0
Age
32
Location
USA
XP
646
Country
United States
You can even use HBL from 11.0.0-33 with a renamed payload.
You can download the appropriate one for your system+region from here:
https://github.com/Plailect/Guide/wiki/Part-5-(arm9loaderhax)

As for the HBL.cia, go here:
https://github.com/yellows8/hblauncher_loader/releases

Or are you asking how to have an offline exploit to launch into your emunand//rednand?


The second part. My system is already on 9.2 with 11 ReiNand. I just want to be able to get into emunand without going through yellow8's page..agro an offline exploit.
 

Temptress Cerise

Miss Magic~ <3
Member
Joined
May 1, 2016
Messages
2,242
Trophies
1
XP
2,336
Country
United States
The second part. My system is already on 9.2 with 11 ReiNand. I just want to be able to get into emunand without going through yellow8's page..agro an offline exploit.
Setup autoboot menuhax, through browserhax.
Steps:
1. Put the contents of starter folder from the starter.zip (http://smealum.github.io/ninjhax2/starter.zip) onto the root of your SD Card.
2. Change your theme 2-3 times, from default stock one to any other, and finally back to default stock one.
3. Open the browser, then open the browser settings as fast as possible, scroll to the bottom and Initialize Savedata or Clear All Save Data, as fast as possible.
4. Navigate to http://yls8.mtheall.com/3dsbrowserhax_auto.php (Keep trying until it works)
5. Open the menuhax_manager app.
6. Press A to install. Just look for a success message towards the end to know it was successful, disregard any errors messages that may appear prior to the success message.
7. Go back to the main menu of menuhax_manager, and go to then select "Configure/check haxx trigger", Press A to continue, then select "Type1" or "Type2"
If I remember correctly, both type 1 and type 2 can work as autoboot.:
For type 1) Don't hold any buttons and touch the bottom-screen for autoboot menuhax. (Pressing any other button from cold boot should cancel autoboot)
For type 2) Hold the desired button you want to cancel autboot menuhax at col boot, and while holding it touch the bottom-screen. (This means holding this button will actually cancel autoboot)
8. Depending on you configured your haxx trigger, will depend on how menuhax launches and behaves from now on autoboot, it'll load the boot.3dsx on the root of your SD Card, which should be Homebrew Launcher by default.

Consider using CTRBootManager and setting it to autoboot ReiNAND:
Link: https://gbatemp.net/threads/ctrbootmanager-3ds-boot-manager-loader-homemenuhax.398383/

You still need internet to get menuhax installed properly the first time around, but after that you don't. Also, menuhax does have a failure rate of launching properly, consider A9LH if you must have 100% bootrate, but it's a pretty long guide and can take a while to setup properly, ask questions if you need help.

A9LH Guide: https://github.com/Plailect/Guide/wiki

There is also this to improve menuhax bootrates:
http://gbatemp.net/threads/guide-how-to-improve-menuhax-boot-rate-to-nearly-100.410764/

You could also look into lesshax as opposed to the solution above.
 
  • Like
Reactions: Kyojin

SomecallmeBerto

The Anti-Hero
OP
Member
Joined
Dec 17, 2014
Messages
1,097
Trophies
0
Age
32
Location
USA
XP
646
Country
United States
Setup autoboot menuhax, through browserhax.
Steps:
1. Put the contents of starter folder from the starter.zip (http://smealum.github.io/ninjhax2/starter.zip) onto the root of your SD Card.
2. Change your theme 2-3 times, from default stock one to any other, and finally back to default stock one.
3. Open the browser, then open the browser settings as fast as possible, scroll to the bottom and Initialize Savedata or Clear All Save Data, as fast as possible.
4. Navigate to http://yls8.mtheall.com/3dsbrowserhax_auto.php (Keep trying until it works)
5. Open the menuhax_manager app.
6. Press A to install. Just look for a success message towards the end to know it was successful, disregard any errors messages that may appear prior to the success message.
7. Go back to the main menu of menuhax_manager, and go to then select "Configure/check haxx trigger", Press A to continue, then select "Type1" or "Type2"
If I remember correctly, both type 1 and type 2 can work as autoboot.:
For type 1) Don't hold any buttons and touch the bottom-screen for autoboot menuhax. (Pressing any other button from cold boot should cancel autoboot)
For type 2) Hold the desired button you want to cancel autboot menuhax at col boot, and while holding it touch the bottom-screen. (This means holding this button will actually cancel autoboot)
8. Depending on you configured your haxx trigger, will depend on how menuhax launches and behaves from now on autoboot, it'll load the boot.3dsx on the root of your SD Card, which should be Homebrew Launcher by default.

Consider using CTRBootManager and setting it to autoboot ReiNAND:
Link: https://gbatemp.net/threads/ctrbootmanager-3ds-boot-manager-loader-homemenuhax.398383/

You still need internet to get menuhax installed properly the first time around, but after that you don't. Also, menuhax does have a failure rate of launching properly, consider A9LH if you must have 100% bootrate, but it's a pretty long guide and can take a while to setup properly, ask questions if you need help.

A9LH Guide: https://github.com/Plailect/Guide/wiki

There is also this to improve menuhax bootrates:
http://gbatemp.net/threads/guide-how-to-improve-menuhax-boot-rate-to-nearly-100.410764/

You could also look into lesshax as opposed to the solution above.

Thank you this is what I needed. I'll look into the improving menuhax boot topic you linked. As for A9LH I still need to read more up on it before I try that out.

/topic
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    OctoAori20 @ OctoAori20: Nice nice-