Homebrew Random "An Error has ocurred. Please turn off the system and try again" message

Matezoide

Well-Known Member
OP
Newcomer
Joined
Jan 20, 2016
Messages
48
Trophies
0
Age
30
XP
122
Country
Brazil
Hello.

Earlier today, when i turned on my 3DS, i was greeted with this message.

Before trying anything, since i havent changed any configurations recently, i turned it off and then on again, which allowed my Old 3DS to boot in Emumand as usual.

Shrugging it off, i went on to play my Fire Emblem Fates, installed through a .cia, but after a few minutes, the message came back.

Currently my 3DS is on, with Fire Emblem playing. I replayed the stage that crashed, did the exact same things and nothing. I decided to leave it on to check what would happen, and after around 10 minutes as of this message, no crashes have happened.

Does anyone know what could have caused these? Is there a chance they were just random one-time things that signify little?

My appologies if this is the wrong place to ask.
 

N64

Well-Known Member
Member
Joined
Apr 16, 2014
Messages
425
Trophies
0
XP
267
Country
United States
could be something dying on the 3ds. I had this issue when my wifi chip was on its way out
 

Matezoide

Well-Known Member
OP
Newcomer
Joined
Jan 20, 2016
Messages
48
Trophies
0
Age
30
XP
122
Country
Brazil
could be something dying on the 3ds. I had this issue when my wifi chip was on its way out

Thats annoying, to say the least...

Unfortunately, Nintendo has left my country a while ago, so official support is probably out of question. It hasnt been crashed again though, which is at least a bit of a relief.

Do you remember how often the error ocurred? Were you able to use your 3DS at all until you replaced the wifi chip?
 
Last edited by Matezoide,

ThePanchamBros

Hates the Undertale Fandom
Member
Joined
Jan 31, 2016
Messages
340
Trophies
0
Age
23
Location
Under your bed ( ͡° ͜ʖ ͡°)
XP
406
Country
United States
Hello.

Earlier today, when i turned on my 3DS, i was greeted with this message.

Before trying anything, since i havent changed any configurations recently, i turned it off and then on again, which allowed my Old 3DS to boot in Emumand as usual.

Shrugging it off, i went on to play my Fire Emblem Fates, installed through a .cia, but after a few minutes, the message came back.

Currently my 3DS is on, with Fire Emblem playing. I replayed the stage that crashed, did the exact same things and nothing. I decided to leave it on to check what would happen, and after around 10 minutes as of this message, no crashes have happened.

Does anyone know what could have caused these? Is there a chance they were just random one-time things that signify little?

My appologies if this is the wrong place to ask.
I got that when I installed a game cia once.... the cia might be invalid or corrupt
 

Matezoide

Well-Known Member
OP
Newcomer
Joined
Jan 20, 2016
Messages
48
Trophies
0
Age
30
XP
122
Country
Brazil
I got that problem and it was my sd card I gave it a little clean and have not had any problems since.

I hope that was it. I'll try this, and if it continues, use a different SD.

I got that when I installed a game cia once.... the cia might be invalid or corrupt

Cant be the game, i have played it for several hours now and this is the very first time something like that ever happened.
 

Matezoide

Well-Known Member
OP
Newcomer
Joined
Jan 20, 2016
Messages
48
Trophies
0
Age
30
XP
122
Country
Brazil
If TWL mode still works (DSiWare and DS Download Play), then it's definitely your SD.

TWL is working, yes.

I admit, however, that my computer knowledge is lacking. If i were to make a backup of my SD's files, cleaned it and put the files back in, would it work just as it used to be, or would i need to reinstall certain things? I have seen numerous tutorials on cleaning the card on this website, however, i havent seen much info regarding that...

Could the error, rather than being connected to the Micro SD card, be coming from the adapter instead?
 
Last edited by Matezoide,

RocketRobz

Stylish TWiLight Hero
Developer
Joined
Oct 1, 2010
Messages
16,575
Trophies
3
Age
24
XP
20,948
Country
United States
TWL is working, yes.

I admit, however, that my computer knowledge is lacking. If i were to make a backup of my SD's files, cleaned it and put the files back in, would it work just as it used to be, or would i need to reinstall certain things?
It will still work as it used to be, but don't format it, as it will remove EmuNAND.
 

Matezoide

Well-Known Member
OP
Newcomer
Joined
Jan 20, 2016
Messages
48
Trophies
0
Age
30
XP
122
Country
Brazil
It will still work as it used to be, but don't format it, as it will remove EmuNAND.

Huh, i am a bit confused now.

Is the general cleaning process different from a full format? The tutorials i have found state everything would be permanently removed, and the method i had in mind is said to remove Emumand.

My sincerest appologies, this is just not my area of expertize, as you surely noticed. Is there a tutorial rhat shows how i could go around cleaning my SD without removing Emumand?
 

regnad

Button Masher
Member
Joined
May 19, 2008
Messages
2,515
Trophies
1
Age
53
XP
3,675
Country
Japan
TWL is working, yes.

I admit, however, that my computer knowledge is lacking. If i were to make a backup of my SD's files, cleaned it and put the files back in, would it work just as it used to be, or would i need to reinstall certain things? I have seen numerous tutorials on cleaning the card on this website, however, i havent seen much info regarding that...

Could the error, rather than being connected to the Micro SD card, be coming from the adapter instead?

If you reformat it, the EmuNand partition should remain untouched, and that may well solve the problem. Even scanning the SD card for errors on your PC may magically fix it.

However if your SD card needs to be replaced, you'll need to create a partition on a new SD with EmuNand9, dump the EmuNand, and inject it into the partition on the new card.

edit: I think it should remain untouched! No? Anyone want to chime in on that?
 

Matezoide

Well-Known Member
OP
Newcomer
Joined
Jan 20, 2016
Messages
48
Trophies
0
Age
30
XP
122
Country
Brazil
Very well, i think i have a general idea of what i should do?

In case i do need to replace my SD card....


First, i use this program https://gbatemp.net/threads/emunand-tool-release-and-support-thread.359239/ and select Extract Emumand. It will automatically take the Emumand from my SD card and create an .exe file. This file will be the Emumand.

Then, i copy everything on the SD card itself and save it in my computer.

Inserting my new SD card, i take the previous files, paste them on the new SD Card, then i use the program, select ''INECT Nand to Emunand''.

Then, selecting my backup, the program will insert the Emumand into my new SD Card.

Once this is done, will everything be working correctly? Or will i have to do something else? Games and saves themselves will be safe, correct?


Many thanks for all the answers thus far and your considerable pacience. I wish to gather as much information as possible before attempting anything, as i know how badly this can backfire when the user lacks knowledge.
 
Last edited by Matezoide,

regnad

Button Masher
Member
Joined
May 19, 2008
Messages
2,515
Trophies
1
Age
53
XP
3,675
Country
Japan
You need to use EmuNand9. That can create a partition, delete a partition, and dump either your sysNand or your emuNand, as well as inject either of these nands. The dumped file will be a bin file.
 

Matezoide

Well-Known Member
OP
Newcomer
Joined
Jan 20, 2016
Messages
48
Trophies
0
Age
30
XP
122
Country
Brazil
You need to use EmuNand9. That can create a partition, delete a partition, and dump either your sysNand or your emuNand, as well as inject either of these nands. The dumped file will be a bin file.

Ah, alright. Just go to EmuNand9 and select the ''Dump Emunand to .bin'' option to create a backup? Then with the .bin in the new SD card's Emumand9 archieve, i can use Emunand9 to restore it?
 
Last edited by Matezoide,

Matezoide

Well-Known Member
OP
Newcomer
Joined
Jan 20, 2016
Messages
48
Trophies
0
Age
30
XP
122
Country
Brazil

Ah, this is simple then.

A huge relief indeed. So just copy everything to the new SD, open the Homebrew Launcher with CtrBootManager (It is also how i open my Emumand), open Emumand9, select Clone EmuNAND.bin to EmuNAND and then go back to gaming on EmuNAND like this entire ordeal never happened? I am guessing i wont have to Unlink the NANDs again, either, and that SysNAND will not need a similar process.

Is my line of thought accurate, or will i have to do something else?

Sorry i like to confirm things like i am a 4 years old because i am seriously afraid of messing this up lol
 
Last edited by Matezoide,

regnad

Button Masher
Member
Joined
May 19, 2008
Messages
2,515
Trophies
1
Age
53
XP
3,675
Country
Japan
Ah, this is simple then.

A huge relief indeed. So just copy everything to the new SD, open the Homebrew Launcher with CtrBootManager (It is also how i open my Emumand), open Emumand9, select Clone EmuNAND.bin to EmuNAND and then go back to gaming on EmuNAND like this entire ordeal never happened? I am guessing i wont have to Unlink the NANDs again, either, and that SysNAND will not need a similar process.

Is my line of thought accurate, or will i have to do something else?

Sorry i like to confirm things like i am a 4 years old because i am seriously afraid of messing this up lol

First format your new SD with Panasonic SD Formatter. Then using the old SD in the 3DS, get into EmuNand9. Dump your EmuNAND bin. Unmount the SD without leaving EmuNand9 (select). Put your old SD in your computer and copy the contents to someplace there. Put your new SD in the 3DS. Go back to main EmuNand9 menu and do SD Format Options/Format SD (EmuNAND default). Unmount new SD. Put it in the computer and copy the old SD contents over. Put it back in the 3DS. Choose EmuNAND Manager Options. Restore file to EmuNAND. Select your bin file. Voila!
 

Matezoide

Well-Known Member
OP
Newcomer
Joined
Jan 20, 2016
Messages
48
Trophies
0
Age
30
XP
122
Country
Brazil
First format your new SD with Panasonic SD Formatter. Then using the old SD in the 3DS, get into EmuNand9. Dump your EmuNAND bin. Unmount the SD without leaving EmuNand9 (select). Put your old SD in your computer and copy the contents to someplace there. Put your new SD in the 3DS. Go back to main EmuNand9 menu and do SD Format Options/Format SD (EmuNAND default). Unmount new SD. Put it in the computer and copy the old SD contents over. Put it back in the 3DS. Choose EmuNAND Manager Options. Restore file to EmuNAND. Select your bin file. Voila!

Alright, many thanks :D

Thanks a lot for your patience. If i end up needing a backup, i will try this method. It is a good thing there are several different ways to restore a backup too (Was looking up other methods because the more the merrier), so even if this doesnt quite work out, i'll have other options, so it is another weight off my shoulders (There are few things more miserable than a tutorial not working for some insane reason when it is your only option).

Nonethless, this was of immense help, and i am sad that i can not offer anything but my most sincere thanks.
 
Last edited by Matezoide,
  • Like
Reactions: regnad

N64

Well-Known Member
Member
Joined
Apr 16, 2014
Messages
425
Trophies
0
XP
267
Country
United States
Do you remember how often the error ocurred? Were you able to use your 3DS at all until you replaced the wifi chip?

90 minutes after starting the 3DS, almost on the dot. I didn't even have to use wifi actively, as long as it was on it would cause the problem. Good luck.
 

Matezoide

Well-Known Member
OP
Newcomer
Joined
Jan 20, 2016
Messages
48
Trophies
0
Age
30
XP
122
Country
Brazil
90 minutes after starting the 3DS, almost on the dot. I didn't even have to use wifi actively, as long as it was on it would cause the problem. Good luck.

I am guessing attempting to connect online would make it crash immediately? Because i made a few more tests and the Wi-Fi itself is fine (Connected, Downloaded and Visited someone's Castle on Fire Emblems with no issues), so it is likely the card. One time it even got an error on boot, before the Wi-Fi features, to my knowledge, are even turned on.

The problem is also happening a bit more frequently...did your errors increase in frequency as well? I am like 90% sure it is the SD card, and i'll be getting a replacement tomorrow, but the more i know about your case, the more i can relax (or worry), since fixing it would not be an easy task.

I am going to leave it on without my SD card for an hour or so and see if it repeats.
 
Last edited by Matezoide,

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    Xdqwerty @ Xdqwerty: good night