Homebrew [RetroArch] Nightly builds here!

[JJTapia19]

This might be a stupid question but where would I get the most recent updated boot.3dsx

Here you go. Hope it works! https://twitter.com/smealum/status/633480944146448385

 

[SeongGino]

So... erm...
NXengine's new .3DSX crashes with a stark RED on the stock payload loading, with symbols inside of it.

 

[NostalgicMillennial]

Here you go. Hope it works! https://twitter.com/smealum/status/633480944146448385

I use the HB Launcher Grid / Folder mod....do I need to update to this? or is the modded version based on this revision

 

[HeroPrinny]

Here you go. Hope it works! https://twitter.com/smealum/status/633480944146448385

Hasn't for me.
Using the 2/10 Nightly build Retroarch gpSP on 9.9 N3DS.
Black top screen and red bottom screen.

 

[JJTapia19]

Hasn't for me.
Using the 2/10 Nightly build Retroarch gpSP on 9.9 N3DS.
Black top screen and red bottom screen.

That's the only thing I've heard that causes the error you are having. Do other Cores work? Did you replaced the boot.3dsx that's on the root of your 3ds sd card with the new one?

 

[HeroPrinny]

That's the only thing I've heard that causes the error you are having. Do other Cores work? Did you replaced the boot.3dsx that's on the root of your 3ds sd card with the new one?

Other Cores work fine and CitraGB now works. I replaced old boot.3dsx with the one from the twitter post you linked.

 

[JJTapia19]

Other Cores work fine and CitraGB now works. I replaced old boot.3dsx with the one from the twitter post you linked.

Ok if other cores are working your boot.3dsx is not the problem. Try redownloading the gpsp emulator. if you are using ftp then probably gpgp's .3dsx got corrupted or something.

 

[Stack3r]

Does anyone know why I'm getting that sideways clip?

 

[HeroPrinny]

Ok if other cores are working your boot.3dsx is not the problem. Try redownloading the gpsp emulator. if you are using ftp then probably gpgp's .3dsx got corrupted or something.

I used the Nightly build from 23rd Sep and works fine.

 

[NostalgicMillennial]

crusader No remorse works beautifully....wonder wonderful work!!

 

[Rockhoundhigh]

@Rockhoundhigh , or anyone who is having trouble starting the .cia version, could you check if these work for you ?
http://buildbot.libretro.com/.aliaspider/cia.7z

These still refuse to boot. Tested using both PastaCFW (w/no firmlaunch) and CakesFW (w/a 9.5 firmware.bin)

 

[WarioTails358]

So I started up the Ps1.3dsx and after I select where the bios are and turn off sound and dynamic recompiler is disabled, the ps1 boot up screen intro plays but after it ends I'm taken to a menu with a Cd player and Memory Card Option. Is there any way to go pass this?

 

[JJTapia19]

I used the Nightly build from 23rd Sep and works fine.

I've just tried the latest build and it worked fine. If you want try redownloading the pack again. Sounds like you got a corrupted gpsp .3dsx for some reason.

 

[aliaspider]

These still refuse to boot. Tested using both PastaCFW (w/no firmlaunch) and CakesFW (w/a 9.5 firmware.bin)

I'm completely clueless to what is causing this then :/
what was the last nightly that worked for you ?

 

[JJTapia19]

I can confirm that gpsp cia is get's stuck on the nintendo 3ds boot screen. Like not criptofixed games that require higher firmware

 

[xoleras20099]

So I started up the Ps1.3dsx and after I select where the bios are and turn off sound and dynamic recompiler is disabled, the ps1 boot up screen intro plays but after it ends I'm taken to a menu with a Cd player and Memory Card Option. Is there any way to go pass this?

Either a bad rom, or you renamed the .bin/.img/.cue and tried to load the .cue sheet.

 

[Rrenzen]

@Rockhoundhigh , or anyone who is having trouble starting the .cia version, could you check if these work for you ?
http://buildbot.libretro.com/.aliaspider/cia.7z

gambatte_libretro - not work
picodrive_libretro - not work
snes9x_next_libretro - not work
gpsp_libretro - not work
pcsx_rearmed_libretro - Work
quicknes_libretro - not work
nxengine_libretro - not work
nestopia_libretro - not work
mgba_libretro - not work
2048_libretro - not work
fceumm_libretro - not work
genesis_plus_gx_libretro - not work
mednafen_ngp_libretro - not work
mednafen_vb_libretro - not work
mednafen_wswan_libretro - not work
fb_alpha_neo_libretro - not work
fb_alpha_cps2_libretro - not work
fb_alpha_cps1_libretro - not work
catsfc_plus_libretro - not work
catsfc_libretro - not work

 

[WarioTails358]

Either a bad rom, or you renamed the .bin/.img/.cue and tried to load the .cue sheet.

I was running my rom which was .bin.
do i need its .cue file too?

 

[AtlasFontaine]

@aliaspider I'm getting 52-55 fps on Sonic 1 (genesis). Not 60
I have Vsync and audio off tho

 

[Rockhoundhigh]

I'm completely clueless to what is causing this then :/
what was the last nightly that worked for you ?

The last build from 9/30 works perfectly. The last build from 10/01 does not. And the most current build also fails to make it past the Nintendo 3DS logo :/