Hacking [Release] rxTools - Roxas75 3DS Toolkit [fw 2.0 - 9.2]

[pakrett]

if there is a new build share it plez

Alright, since it's quite stable and there's a quite high demand, I think I could upload it as an Alpha (not Beta) release.
When a new Alpha (or Beta) is released and tested, I'll remove the older one.

From now on, you can find tested alpha releases on GitHub:
https://github.com/roxas75/rxTools/releases

 

[urherenow]

Indeed. The latest commit is built into the latest release. Nastys has it backwards though... Stuff starts out as Alpha, THEN goes into Beta.

 

[nop90]

Indeed. The latest commit is built into the latest release. Nastys has it backwards though... Stuff starts out as Alpha, THEN goes into Beta.

Official releases will follow this rule. The Alpha is the only official ATM.

 

[Syphurith]

Sorry for being rude.
@nop90 My mistake, too naive.
That's not related to you.
Sorry for disturbing you.
Original post removed.

 

[Arcanuskun]

if i buy a new o3ds, assuming it has no browser and is in 7.x, can i use this cfw without using cubic ninja or the likes. All I have is a ds flashcart

 

[Gadorach]

if i buy a new o3ds, assuming it has no browser and is in 7.x, can i use this cfw?

Not currently. You would need to wait until Brahma is ported to Ninjhax 2.0 for older firmwares. Also, Ninjhax 2.0 would have to be ported to older firmwares, as it currently only supports 9.0-9.9. It would be possible to use a cart to update the console to 9.0-9.2 though, and use Ninjhax 2.0 from there, if Brahma is ported with rxTools.

 

[tranxuanthang]

Going to Instruction Mannual make emunand freeze and/or show a error dialog too (an error has occurred) ver 2.6 and 3.0b6, emunand 9.9 Because of emunand 9.9 i guess.

 

[Gadorach]

Going to Instruction Mannual make emunand freeze and/or show a error dialog too (an error has occurred) ver 2.6 and 3.0b6, emunand 9.9 Because of emunand 9.9 i guess.

EmuNAND 9.9 is fully supported, so no, that's not the issue. You make an EmuNAND with the Gateway launcher, then boot it with rxTools. Make sure to use a Class 10 SD/HC/XC card.

Edit: My bad, it's actually that the instruction manual applet is, well, an applet. Applets are broken in rxTools right now, so you'll have to wait until 3.0RC comes out, which will take about a week and a half or so.

 

[tranxuanthang]

EmuNAND 9.9 is fully supported, so no, that's not the issue. You make an EmuNAND with the Gateway launcher, then boot it with rxTools. Make sure to use a Class 10 SD/HC/XC card.

Of course I create emunand with GW and boot with rxtools. I am using a 16gb class 10 tosiba. So it isn't problem.

 

[urherenow]

Not currently. You would need to wait until Brahma is ported to Ninjhax 2.0 for older firmwares. Also, Ninjhax 2.0 would have to be ported to older firmwares, as it currently only supports 9.0-9.9. It would be possible to use a cart to update the console to 9.0-9.2 though, and use Ninjhax 2.0 from there, if Brahma is ported with rxTools.

I don't think that answer is correct. A brand new 3DS will not have a browser and neither will an update inside of a cart., so no way to use Ninjhax without updating through system settings with wifi or using a fake soap server...

 

[ccfman2004]

I don't think that answer is correct. A brand new 3DS will not have a browser and neither will an update inside of a cart., so no way to use Ninjhax without updating through system settings with wifi or using a fake soap server...

Explain to me how I was able to use the rxTools server to load rxTools after using Gateway's server to create an emuNand on a brand new, never updated O3DS with 7.1.0-7 on it?

 

[urherenow]

Explain to me how I was able to use the rxTools server to load rxTools after using Gateway's server to create an emuNand on a brand new, never updated O3DS with 7.1.0-7 on it?

The -7 at the end tells you you already had a browser installed. Many new systems have eg. 9.0.0-0U... The -0 means there is no browser version.

Edit: with that I mind, just grabbed off of the shelf does not mean shop employees did not play with it...

 

[VerseHell]

Explain to me how I was able to use the rxTools server to load rxTools after using Gateway's server to create an emuNand on a brand new, never updated O3DS with 7.1.0-7 on it?

It's impossible to have a brand new O3DS with 7.1.0-7, it's either 7.1.0-14, 7.1.0-15 or 7.1.0-16.

 

[Gadorach]

I don't think that answer is correct. A brand new 3DS will not have a browser and neither will an update inside of a cart., so no way to use Ninjhax without updating through system settings with wifi or using a fake soap server...

Ninjhax 2.0 dosen't hook the browser applet, and therefore doesn't depend on its presence. It works regardless of whether or not you have one installed. But for consistency's sake, most new consoles have the browser installed.

 

[zerolinks]

EmuNAND 9.9 is fully supported, so no, that's not the issue. You make an EmuNAND with the Gateway launcher, then boot it with rxTools. Make sure to use a Class 10 SD/HC/XC card.

Edit: My bad, it's actually that the instruction manual applet is, well, an applet. Applets are broken in rxTools right now, so you'll have to wait until 3.0RC comes out, which will take about a week and a half or so.

This is also effecting notifications and the friends list correct?

 

[ccfman2004]

It's impossible to have a brand new O3DS with 7.1.0-7, it's either 7.1.0-14, 7.1.0-15 or 7.1.0-16.

I wasn't sure which it had as it is no longer there since I updated it to 9.0.

Why would Nintendo not include a browser in the first place?

This is also effecting notifications and the friends list correct?

I had trouble with the Friends list on an O3DS with rxTools 2.5 but not with 2.6.

 

[solitaire4eva]

After the replacement of the Health app with FBI, is there a way to update the FBI App? The one I am using is below the current one and doesn't have all of the bells and whistles.

 

[samiam144]

After the replacement of the Health app with FBI, is there a way to update the FBI App? The one I am using is below the current one and doesn't have all of the bells and whistles.

Just install the new version, it will make it's own icon. In fact, it's recommended to do that because if you ever update emunand, it will remove FBI from the H&S app.

 

[solitaire4eva]

THANKS SAMIAM144!

I have to figure out how to do that, wait I am so stupid lol, nevermind I'm getting the FBI's CIA file (OMG that sounds sick!)

I noticed some CIA's don't install under rxtools that installed in Pasta CFW. I'm just gonna have to use both the

 

[zerolinks]

I had trouble with the Friends list on an O3DS with rxTools 2.5 but not with 2.6.

I'm having these issues on Rxtools 2.6 with emunand 9.9.