Hacking [Release] rxTools - Roxas75 3DS Toolkit [fw 2.0 - 9.2]

[Roxas75]

Thanks to you all, guys!
I'm sorry for being a bit absente in these days.
I'm very busy with school and everything. Though there are some progresses:
I ported rxTools to ninjhax, but needs a lot of tests and fixes, becouse it has quite an 80% rate of successfully booting. I use Karl bootstrap code with shinyquagsire permission.
And i'm currently working on mset. It is a bit tricky, since i have to write the entire code myself, starting from the rop, and it will take some time.
Though, once the mset setup is done, it is a matter of minutes to port it to any other userland entrypoint, so i think it's not a time-waste.
After i amplified the compatibility, i'll add all the useful tools to extract and inject useful nand files, i plan a sub-menu just for that.
Just need time. I'm alone afterall.
For new3ds, i'm not sure what i'll do. Though i have some new3ds testers, so i can try to write some code for it.
This is not meant to be any official n3ds compatibility announce

PS: also, maybe it's better to move this thread to the Flashcards&CustomFirmwares section at this rate..

 

[xDarkPeTruSx]

Thanks to you all, guys!
I'm sorry for being a bit absente in these days.
I'm very busy with school and everything. Though there are some progresses:
I ported rxTools to ninjhax, but needs a lot of tests and fixes, becouse it has quite an 80% rate of successfully booting. I use Karl bootstrap code with shinyquagsire permission.
And i'm currently working on mset. It is a bit tricky, since i have to write the entire code myself, starting from the rop, and it will take some time.
Though, once the mset setup is done, it is a matter of minutes to port it to any other userland entrypoint, so i think it's not a time-waste.
After i amplified the compatibility, i'll add all the useful tools to extract and inject useful nand files, i plan a sub-menu just for that.
Just need time. I'm alone afterall.
For new3ds, i'm not sure what i'll do. Though i have some new3ds testers, so i can try to write some code for it.
This is not meant to be any official n3ds compatibility announce

PS: also, maybe it's better to move this thread to the Flashcards&CustomFirmwares section at this rate..

I have 2 new 3ds xl. I... I can be your test subject, if you wish....

 

[MrJason005]

Thanks to you all, guys!
I'm sorry for being a bit absente in these days.
I'm very busy with school and everything. Though there are some progresses:
I ported rxTools to ninjhax, but needs a lot of tests and fixes, becouse it has quite an 80% rate of successfully booting. I use Karl bootstrap code with shinyquagsire permission.
And i'm currently working on mset. It is a bit tricky, since i have to write the entire code myself, starting from the rop, and it will take some time.
Though, once the mset setup is done, it is a matter of minutes to port it to any other userland entrypoint, so i think it's not a time-waste.
After i amplified the compatibility, i'll add all the useful tools to extract and inject useful nand files, i plan a sub-menu just for that.
Just need time. I'm alone afterall.
For new3ds, i'm not sure what i'll do. Though i have some new3ds testers, so i can try to write some code for it.
This is not meant to be any official n3ds compatibility announce

PS: also, maybe it's better to move this thread to the Flashcards&CustomFirmwares section at this rate..

I just want to let you know that this is an amazing project, thanks a lot

 

[Chaldron]

-snip-

Thanks for all your work regardless of speed! I'd wager most of us don't know a shred of what you do in order to make this stuff.

 

[zero2exe]

Thanks to you all, guys!
I'm sorry for being a bit absente in these days.
I'm very busy with school and everything. Though there are some progresses:
I ported rxTools to ninjhax, but needs a lot of tests and fixes, becouse it has quite an 80% rate of successfully booting. I use Karl bootstrap code with shinyquagsire permission.
And i'm currently working on mset. It is a bit tricky, since i have to write the entire code myself, starting from the rop, and it will take some time.
Though, once the mset setup is done, it is a matter of minutes to port it to any other userland entrypoint, so i think it's not a time-waste.
After i amplified the compatibility, i'll add all the useful tools to extract and inject useful nand files, i plan a sub-menu just for that.
Just need time. I'm alone afterall.
For new3ds, i'm not sure what i'll do. Though i have some new3ds testers, so i can try to write some code for it.
This is not meant to be any official n3ds compatibility announce

PS: also, maybe it's better to move this thread to the Flashcards&CustomFirmwares section at this rate..

Nah leave it here before it gets derailed by the OSKA/KARL trolls, makes it easier to follow on actual news or helping people getting this to work

 

[Hashtastrophe]

Nah leave it here before it gets derailed by the OSKA/KARL trolls, makes it easier to follow on actual news or helping people getting this to work

haha jokes on you. We KARL\OSKA trolls see all.

 

[johovahs]

Nah leave it here before it gets derailed by the OSKA/KARL trolls, makes it easier to follow on actual news or helping people getting this to work

Agree leave it here as it seems much more calm.

 

[Wowfunhappy]

Thanks to you all, guys!
I ported rxTools to ninjhax, but needs a lot of tests and fixes, becouse it has quite an 80% rate of successfully booting. I use Karl bootstrap code with shinyquagsire permission.

Iirc, Bootstrap itself has a success rate substantially below 100%, especially on Old 3DS's, so it may not be entirely the fault of your code. 80% sounds pretty darn good anyway.

 

[PKNess]

Thanks to you all, guys!
I'm sorry for being a bit absente in these days.
I'm very busy with school and everything. Though there are some progresses:
I ported rxTools to ninjhax, but needs a lot of tests and fixes, becouse it has quite an 80% rate of successfully booting. I use Karl bootstrap code with shinyquagsire permission.
And i'm currently working on mset. It is a bit tricky, since i have to write the entire code myself, starting from the rop, and it will take some time.
Though, once the mset setup is done, it is a matter of minutes to port it to any other userland entrypoint, so i think it's not a time-waste.
After i amplified the compatibility, i'll add all the useful tools to extract and inject useful nand files, i plan a sub-menu just for that.
Just need time. I'm alone afterall.
For new3ds, i'm not sure what i'll do. Though i have some new3ds testers, so i can try to write some code for it.
This is not meant to be any official n3ds compatibility announce

PS: also, maybe it's better to move this thread to the Flashcards&CustomFirmwares section at this rate..

That would be great, I love rxTools and run it on new3DS would be absolutly amazing, just sayin, anyway, thank you for all your work.

 

[extrun20]

Can someone please tell me how to Generate Xorpads on SDinfo.bin from EmuNAND? Thanks for answering.

 

[MelonGx]

Is rx-mode compatible with KeyY 6.0 retail cart saves?
Such as Pokemon XYORAS, MH4U, SSB, all 2014+ games, etc.
(for converting them into SaveDataFiler format, or directly use)

 

[Apache Thunder]

Is rx-mode compatible with KeyY 6.0 retail cart saves?
Such as Pokemon XYORAS, MH4U, SSB, all 2014+ games, etc.
(for converting them into SaveDataFiler format, or directly use)

Assuming you boot into a 6.x or higher sysnand. Yes. But the real question would be how you manage to get SaveDataFiler to work in rxMode because rxMode doesn't allow unsigned stuff to work and SaveDataFiler is definitely one of them.

 

[Cyan]

PS: also, maybe it's better to move this thread to the Flashcards&CustomFirmwares section at this rate..

I think it would be better in the homebrew section.
As it's a homebrew utility/System tools. Any projects run on the console is a homebrew. Only the piracy tools are in flashcarts section (gateway, CFW with ROM/Cia launching features, etc.)

It's always difficult to choose a section when a tool covers multiple area.
But one thing is sure, it's not a Computer's application, and has nothing to do in Translation and utilities.


Edit:
Moved to Homebrew section.

 

[gamesquest1]

its safer in homebrew, less piracy debates

 

[Deleted User]

Finally a way to go into emuNAND without GW card!

 

[urherenow]

Hey, wait... Will DSiWare and GBA VC run on emunand with this? Legit stuff of course... I'll go try as soon as I get home.

Edit: Nope. Still black screen using rxmode. I wonder why that is...

 

[Kohmei]

I'm mostly interested in the CTR decryption (and maybe xorpad generation) ability of this tool for the N3DS because I used to make all my own CIAs, and I didn't realize the N3DS didn't work with any of the tools when I got rid of my OG3DS.

As of right now (please correct me if I'm wrong) there is no way to fully create a CIA file using a N3DS, so I would be very interested in seeing this tool even have partial support for all of its features on the N3DS

 

[piratesephiroth]

I'm mostly interested in the CTR decryption (and maybe xorpad generation) ability of this tool for the N3DS because I used to make all my own CIAs, and I didn't realize the N3DS didn't work with any of the tools when I got rid of my OG3DS.

As of right now (please correct me if I'm wrong) there is no way to fully create a CIA file using a N3DS, so I would be very interested in seeing this tool even have partial support for all of its features on the N3DS

I think there are no tools available for the N3DS yet.

 

[OmegaPikachu]

So i ran it, everything went fine, it said

"1 file decrypted" which is correct.

but there is nothing new on my SD card.

what did it do?

 

[Fishaman P]

So i ran it, everything went fine, it said

"1 file decrypted" which is correct.

but there is nothing new on my SD card.

what did it do?

Assuming you mean you put a .3DS on your SD Card and selected Decrypt CTR Titles, your .3DS was overwritten with the decrypted version.