Hacking R4ill green failed to update.

[Dubstep16]

Hey i got a r4ill green from ndill.com

And i failed to update it so now it say no ds card inserted.

And i know you need 2 cards and i already got me a r4i-sdhc 3ds from r4i-sdhc.com

Anyone got any idea please i really wanna get my old card back again ^^

 

[Pong20302000]

well sounds like the firmware update broke the card by not flashing correctly
unless you can start the flashing process on another card and switch the card before it starts then you card is dead

 

[Dubstep16]

well sounds like the firmware update broke the card by not flashing correctly
unless you can start the flashing process on another card and switch the card before it starts then you card is dead

ok how do i start a new flashing because i got 2 card i got r4i-sdhc 3ds also

 

[Pong20302000]

boot the .nds update file on other flashcard, then eject and put in the flashcard you wish to flash

 

[Dubstep16]

boot the .nds update file on other flashcard, then eject and put in the flashcard you wish to flash

i did download ill3ds update and did like you said but it did just like stay on 19% for like 10 minutes right now.

 

[jax604]

well sounds like the firmware update broke the card by not flashing correctly
unless you can start the flashing process on another card and switch the card before it starts then you card is dead

ok how do i start a new flashing because i got 2 card i got r4i-sdhc 3ds also

if you are planning to do this, do it on a ds or ds lite since only these systems can card swap. Also make sure you swap the card before u start the update, not during!!

 

[Dubstep16]

well sounds like the firmware update broke the card by not flashing correctly
unless you can start the flashing process on another card and switch the card before it starts then you card is dead

ok how do i start a new flashing because i got 2 card i got r4i-sdhc 3ds also

if you are planning to do this, do it on a ds or ds lite since only these systems can card swap. Also make sure you swap the card before u start the update, not during!!

well i am doing this on my 3ds and and i am 19% but its just like get stuck there.

 

[Pong20302000]

well sounds like the firmware update broke the card by not flashing correctly
unless you can start the flashing process on another card and switch the card before it starts then you card is dead

ok how do i start a new flashing because i got 2 card i got r4i-sdhc 3ds also

if you are planning to do this, do it on a ds or ds lite since only these systems can card swap. Also make sure you swap the card before u start the update, not during!!

well i am doing this on my 3ds and and i am 19% but its just like get stuck there.

it is not recommened to flash cards on a 3DS
i would flash it on a DSPhat or Lite

the reason the card is dead is because you powered it off during the update process

 

[Dubstep16]

well sounds like the firmware update broke the card by not flashing correctly
unless you can start the flashing process on another card and switch the card before it starts then you card is dead

ok how do i start a new flashing because i got 2 card i got r4i-sdhc 3ds also

if you are planning to do this, do it on a ds or ds lite since only these systems can card swap. Also make sure you swap the card before u start the update, not during!!

well i am doing this on my 3ds and and i am 19% but its just like get stuck there.

it is not recommened to flash cards on a 3DS
i would flash it on a DSPhat or Lite

the reason the card is dead is because you powered it off during the update process

yes i am doing this on my dsphat right now and still stuck on 19%

 

[Pong20302000]

well sounds like the firmware update broke the card by not flashing correctly
unless you can start the flashing process on another card and switch the card before it starts then you card is dead

ok how do i start a new flashing because i got 2 card i got r4i-sdhc 3ds also

if you are planning to do this, do it on a ds or ds lite since only these systems can card swap. Also make sure you swap the card before u start the update, not during!!

well i am doing this on my 3ds and and i am 19% but its just like get stuck there.

it is not recommened to flash cards on a 3DS
i would flash it on a DSPhat or Lite

the reason the card is dead is because you powered it off during the update process

yes i am doing this on my dsphat right now and still stuck on 19%

how long? it can take 10 minites or even longer to flash you know

 

[Dubstep16]

well sounds like the firmware update broke the card by not flashing correctly
unless you can start the flashing process on another card and switch the card before it starts then you card is dead

ok how do i start a new flashing because i got 2 card i got r4i-sdhc 3ds also

if you are planning to do this, do it on a ds or ds lite since only these systems can card swap. Also make sure you swap the card before u start the update, not during!!

well i am doing this on my 3ds and and i am 19% but its just like get stuck there.

it is not recommened to flash cards on a 3DS
i would flash it on a DSPhat or Lite

the reason the card is dead is because you powered it off during the update process

yes i am doing this on my dsphat right now and still stuck on 19%

how long? it can take 10 minites or even longer to flash you know

ok now it did pop to 20% i have been waiting for maybe 8 min

 

[Pong20302000]

well sounds like the firmware update broke the card by not flashing correctly
unless you can start the flashing process on another card and switch the card before it starts then you card is dead

ok how do i start a new flashing because i got 2 card i got r4i-sdhc 3ds also

if you are planning to do this, do it on a ds or ds lite since only these systems can card swap. Also make sure you swap the card before u start the update, not during!!

well i am doing this on my 3ds and and i am 19% but its just like get stuck there.

it is not recommened to flash cards on a 3DS
i would flash it on a DSPhat or Lite

the reason the card is dead is because you powered it off during the update process

yes i am doing this on my dsphat right now and still stuck on 19%

how long? it can take 10 minites or even longer to flash you know

ok now it did pop to 20% i have been waiting for maybe 8 min

flashing can take a while, just leave the console on charge doing it and go make so food and eat it

 

[Dubstep16]

well sounds like the firmware update broke the card by not flashing correctly
unless you can start the flashing process on another card and switch the card before it starts then you card is dead

ok how do i start a new flashing because i got 2 card i got r4i-sdhc 3ds also

if you are planning to do this, do it on a ds or ds lite since only these systems can card swap. Also make sure you swap the card before u start the update, not during!!

well i am doing this on my 3ds and and i am 19% but its just like get stuck there.

it is not recommened to flash cards on a 3DS
i would flash it on a DSPhat or Lite

the reason the card is dead is because you powered it off during the update process

yes i am doing this on my dsphat right now and still stuck on 19%

how long? it can take 10 minites or even longer to flash you know

ok now it did pop to 20% i have been waiting for maybe 8 min

flashing can take a while, just leave the console on charge doing it and go make so food and eat it

ok i will do that. So if it have been stuck on 20 for 10 minutes its just normal??

 

[jax604]

well sounds like the firmware update broke the card by not flashing correctly
unless you can start the flashing process on another card and switch the card before it starts then you card is dead

ok how do i start a new flashing because i got 2 card i got r4i-sdhc 3ds also

if you are planning to do this, do it on a ds or ds lite since only these systems can card swap. Also make sure you swap the card before u start the update, not during!!

well i am doing this on my 3ds and and i am 19% but its just like get stuck there.

it is not recommened to flash cards on a 3DS
i would flash it on a DSPhat or Lite

the reason the card is dead is because you powered it off during the update process

yes i am doing this on my dsphat right now and still stuck on 19%

how long? it can take 10 minites or even longer to flash you know

ok now it did pop to 20% i have been waiting for maybe 8 min

flashing can take a while, just leave the console on charge doing it and go make so food and eat it

ok i will do that. So if it have been stuck on 20 for 10 minutes its just normal??

When i did mine, it took about 1-2 hrs for it to finish, It is not a r4ill green but i believe the concept is similar. I just left it running with the charger in and did something else.

 

[Dubstep16]

well sounds like the firmware update broke the card by not flashing correctly
unless you can start the flashing process on another card and switch the card before it starts then you card is dead

ok how do i start a new flashing because i got 2 card i got r4i-sdhc 3ds also

if you are planning to do this, do it on a ds or ds lite since only these systems can card swap. Also make sure you swap the card before u start the update, not during!!

well i am doing this on my 3ds and and i am 19% but its just like get stuck there.

it is not recommened to flash cards on a 3DS
i would flash it on a DSPhat or Lite

the reason the card is dead is because you powered it off during the update process

yes i am doing this on my dsphat right now and still stuck on 19%

how long? it can take 10 minites or even longer to flash you know

ok now it did pop to 20% i have been waiting for maybe 8 min

flashing can take a while, just leave the console on charge doing it and go make so food and eat it

ok i will do that. So if it have been stuck on 20 for 10 minutes its just normal??

When i did mine, it took about 1-2 hrs for it to finish, It is not a r4ill green but i believe the concept is similar. I just left it running with the charger in and did something else.

ok good. so when mine is stuck for 20% its nothing to worry about??

 

[Pong20302000]

ok i will do that. So if it have been stuck on 20 for 10 minutes its just normal??

as above it can take hours

the newer cards take mins or seconds

but just leave it and do something else, you got a 3ds and your other flashcards

 

[jax604]

well sounds like the firmware update broke the card by not flashing correctly
unless you can start the flashing process on another card and switch the card before it starts then you card is dead

ok how do i start a new flashing because i got 2 card i got r4i-sdhc 3ds also

if you are planning to do this, do it on a ds or ds lite since only these systems can card swap. Also make sure you swap the card before u start the update, not during!!

well i am doing this on my 3ds and and i am 19% but its just like get stuck there.

it is not recommened to flash cards on a 3DS
i would flash it on a DSPhat or Lite

the reason the card is dead is because you powered it off during the update process

yes i am doing this on my dsphat right now and still stuck on 19%

how long? it can take 10 minites or even longer to flash you know

ok now it did pop to 20% i have been waiting for maybe 8 min

flashing can take a while, just leave the console on charge doing it and go make so food and eat it

ok i will do that. So if it have been stuck on 20 for 10 minutes its just normal??

When i did mine, it took about 1-2 hrs for it to finish, It is not a r4ill green but i believe the concept is similar. I just left it running with the charger in and did something else.

ok good. so when mine is stuck for 20% its nothing to worry about??

If i were you id let it run for an hour, if no changes, then try a different firmware. Where did you get the firmware? since the site isnt working, do you mean ndsill.net?

 

[Dubstep16]

well sounds like the firmware update broke the card by not flashing correctly
unless you can start the flashing process on another card and switch the card before it starts then you card is dead

ok how do i start a new flashing because i got 2 card i got r4i-sdhc 3ds also

if you are planning to do this, do it on a ds or ds lite since only these systems can card swap. Also make sure you swap the card before u start the update, not during!!

well i am doing this on my 3ds and and i am 19% but its just like get stuck there.

it is not recommened to flash cards on a 3DS
i would flash it on a DSPhat or Lite

the reason the card is dead is because you powered it off during the update process

yes i am doing this on my dsphat right now and still stuck on 19%

how long? it can take 10 minites or even longer to flash you know

ok now it did pop to 20% i have been waiting for maybe 8 min

flashing can take a while, just leave the console on charge doing it and go make so food and eat it

ok i will do that. So if it have been stuck on 20 for 10 minutes its just normal??

When i did mine, it took about 1-2 hrs for it to finish, It is not a r4ill green but i believe the concept is similar. I just left it running with the charger in and did something else.

ok good. so when mine is stuck for 20% its nothing to worry about??

If i were you id let it run for an hour, if no changes, then try a different firmware. Where did you get the firmware? since the site isnt working, do you mean ndsill.net?

yes i mean that webstite and i got it from here at the bottom of the page http://gbatemp.net/topic/326267-r4ill-problem/

 

[jax604]

well sounds like the firmware update broke the card by not flashing correctly
unless you can start the flashing process on another card and switch the card before it starts then you card is dead

ok how do i start a new flashing because i got 2 card i got r4i-sdhc 3ds also

if you are planning to do this, do it on a ds or ds lite since only these systems can card swap. Also make sure you swap the card before u start the update, not during!!

well i am doing this on my 3ds and and i am 19% but its just like get stuck there.

it is not recommened to flash cards on a 3DS
i would flash it on a DSPhat or Lite

the reason the card is dead is because you powered it off during the update process

yes i am doing this on my dsphat right now and still stuck on 19%

how long? it can take 10 minites or even longer to flash you know

ok now it did pop to 20% i have been waiting for maybe 8 min

flashing can take a while, just leave the console on charge doing it and go make so food and eat it

ok i will do that. So if it have been stuck on 20 for 10 minutes its just normal??

When i did mine, it took about 1-2 hrs for it to finish, It is not a r4ill green but i believe the concept is similar. I just left it running with the charger in and did something else.

ok good. so when mine is stuck for 20% its nothing to worry about??

If i were you id let it run for an hour, if no changes, then try a different firmware. Where did you get the firmware? since the site isnt working, do you mean ndsill.net?

yes i mean that webstite and i got it from here at the bottom of the page http://gbatemp.net/t...-r4ill-problem/

Did you try the update from the original site? or is that the update that bricked your card?: http://ndsill.net/downloade/NDSiLL_3DS44Patch.rar

 

[Dubstep16]

well sounds like the firmware update broke the card by not flashing correctly
unless you can start the flashing process on another card and switch the card before it starts then you card is dead

ok how do i start a new flashing because i got 2 card i got r4i-sdhc 3ds also

if you are planning to do this, do it on a ds or ds lite since only these systems can card swap. Also make sure you swap the card before u start the update, not during!!

well i am doing this on my 3ds and and i am 19% but its just like get stuck there.

it is not recommened to flash cards on a 3DS
i would flash it on a DSPhat or Lite

the reason the card is dead is because you powered it off during the update process

yes i am doing this on my dsphat right now and still stuck on 19%

how long? it can take 10 minites or even longer to flash you know

ok now it did pop to 20% i have been waiting for maybe 8 min

flashing can take a while, just leave the console on charge doing it and go make so food and eat it

ok i will do that. So if it have been stuck on 20 for 10 minutes its just normal??

When i did mine, it took about 1-2 hrs for it to finish, It is not a r4ill green but i believe the concept is similar. I just left it running with the charger in and did something else.

ok good. so when mine is stuck for 20% its nothing to worry about??

If i were you id let it run for an hour, if no changes, then try a different firmware. Where did you get the firmware? since the site isnt working, do you mean ndsill.net?

yes i mean that webstite and i got it from here at the bottom of the page http://gbatemp.net/t...-r4ill-problem/

Did you try the update from the original site? or is that the update that bricked your card?: http://ndsill.net/do..._3DS44Patch.rar

i have 22% right now. But the update that bricked my card wasent not ndsill.net i did bricked it with like a dstwo update or something liked that. And the update i linked is the update i try to reflash it with now. but i have got 22% so it go forward but not fast.