Homebrew WIP Status Monitor Overlay - Tesla Overlay to monitor your hardware

[masagrator]

Next time go to Full mode and show what you see.

 

[Keriam]

Next time go to Full mode and show what you see.

I just reinstall all the package and the issue is still there (I wanted to be sure that I didn’t use an old version of one component)

Here is the screen for full version : it seems that GPU usage, Ram usage, board info and FPS image not working.

By the way, I cannot escape the overlay : Hold L + Down + R is not working…

I tried to update my CFW to last HOS version, it doesn’t change anything

 

[masagrator]

Your CPU Core #3 is stressed out. Something is causing it to run rampant. Turn on airplane mode and try again.

 

[Keriam]

Your CPU Core #3 is stressed out. Something is causing it to run rampant. Turn on airplane mode and try again.

You are a genius : with airplane mode eveything is fine !!!

i don‘t undertand why, is there something wrong on my switch ?

 

[masagrator]

Read the very bottom of status monitor readme.

Post automatically merged: Dec 9, 2023

Released version 1.0.2

- Add new keys to config: `battery_avg_iir_filter` and `battery_time_left_refreshrate`, more in CONFIG
- Changing `battery_avg_iir_filter` to `true` results in period time of average voltage being changed to 45s, and 11.25s for amperage
- Removed whole logic behind PR 56 instead relying now on max17050 TTE register
- Changed i2c communication code to avoid issues with wrong readings (thanks to ~lineon)
- Move FPS Graph and FPS Counter to one subcategory "FPS"

This targets mainly people doing overclock because now you can use more reliable way of reading average power by enabling "battery_avg_iir_filter", though period of time is increased .

 

[Keriam]

Read the very bottom of status monitor readme.

Thanks again, I feel bad to not see that before, sorry.

I deleted nifm in the folder atmosphere/exefs_patches and cleaned all sysmodules in atmosphere/contents as suggested but the issue is still there without airplane.

"Your Switch is using sigpatches, is not a primary device, is using linked account, and is connected to network. Delete sigpatches, change your Switch to primary device, unlink account, or disable Wi-Fi."

Of course i am using sigpatches, yes I am using a fake linked account to be able to play diablo 2R and yes switch is connected to internet : at least I can use Airplane mode if I need to check the FPS in a game as workaround. I just don't really understand why I didn't have this issue with previous version;

Thanks again for your help, I really appreciate it.

 

[Deetlemore]

I'm either misremembering, or I've got something wrong in my configuration. Is/was there a button combo that could be held to increase the update rate of the overlay? I could have sworn there was one, but the only button combination I see in my configuration file is key_combo=LSTICK+RSTICK for exiting, and the refresh_rate value.

 

[masagrator]

Since 1.0.0

 

[masagrator]

Released version 1.0.3

• Improved key combo and navigation handling #72 (thanks to @IrneRacoonovich )
• Fixed an issue with battery readings not working after exiting Micro mode multiple times without rebooting Switch (this bug affected also other homebrew reading battery stats with PSM service)
• Futureproofed for sys-clk IPC updates

 

[jnl1]

what is the updated new key combo? in the config it says lstick+rstick, but this does not work for me.

 

[masagrator]

what is the updated new key combo? in the config it says lstick+rstick, but this does not work for me.

You can check actual combo by going into Full mode.

 

[Yulai]

I don't know why fan speed only show 0%(my switch fan are good)
Currently firmware 17.0.1 AMS 1.6.2 and always play airplane mode
I use
Status Monitor Overlay 1.0.3a
SaltyNX 0.7.1
nx-ovlloader 16.0.0 Support
Telsa menu v1.2.3
FPSLocker 1.2.6a
sys-clk 2.0.0 rc

 

[Hackerman_2137]

I don't know why fan speed only show 0%(my switch fan are good)
Currently firmware 17.0.1 AMS 1.6.2 and always play airplane mode
I use
Status Monitor Overlay 1.0.3a
SaltyNX 0.7.1
nx-ovlloader 16.0.0 Support
Telsa menu v1.2.3
FPSLocker 1.2.6a
sys-clk 2.0.0 rc

Because the console dynamically adjusts the fan speed according to the temperature. If the temperature does not exceed about 40 degrees celcius then the fan does not even start.

 

[Yulai]

Because the console dynamically adjusts the fan speed according to the temperature. If the temperature does not exceed about 40 degrees celcius then the fan does not even start.

I opened the back cover of the switch and when I enter the game, the fan works
but fan % show 0%

 

[lazyguy]

is there a way auto start on micro overlay upon starting a game? if not, upon boot.

 

[SNES-Fan]

@masagrator
Hello I'm a Zing user and have seen that it's a fork of your Status-Monitor-Overlay.
But it doesn't seem to be supported anymore. So I've asked myself if you can fix it for the new FW/libnx.

 

[masagrator]

So I've asked myself if you can fix it for the new FW/libnx.

Dunno why you asked yourself what should I do, but I will answer it for you - I won't.

 

[UltimateFight]

Something is missing here:
https://github.com/masagrator/Status-Monitor-Overlay/blob/master/docs/config.md
[micro]
text_align=

 

[masagrator]

Something is missing here:
https://github.com/masagrator/Status-Monitor-Overlay/blob/master/docs/config.md
[micro]
text_align=

You are right. Thanks

 

[UltimateFight]

You are right. Thanks

Hmmm...Why is that value written in capital letters? It doesn't "align" with other values