PS5 Digital - Missing voltage on HDMI circuit

[james-london]

Hi All.. after some advice. I have a PS5 Digital which is missing the voltages circled in red near the HDMI circuit. All other voltages are present and correct (across the entier board). Have replaced the HDMI encoder, and injected voltage, and checked for short around the area but cannot find the issue. Anyone experienced this before? Any pointers would be much appreciated. Thank you

 

[jkyoho]

TRY replace CXD90061GG

 

[james-london]

TRY replace CXD90061GG

Thank you.. will give it a try

 

[Johnny_debt]

What happens when you power on? Is it a short blue light then off?

 

[HellGhast]

Lol, i posted on wrong thread

 

[bramo]

i have the same missing voltages ANY solution ?

Post automatically merged: Dec 6, 2023

i got the same missing voltages ANY solution ??

when power de console 1 beep 2 sec blue light then shuts off

 

[Johnny_debt]

i have the same missing voltages ANY solution ?

Post automatically merged: Dec 6, 2023

i got the same missing voltages ANY solution ??

when power de console 1 beep 2 sec blue light then shuts off

The posted picture is very misleading when you have a 2 sec power on then power off. When you have a 2 second power on then off the southbridge goes into panic mode and doesn't re-enable those standby voltages on the hdmi circuit. It doesn't always mean (usually its not the hdmi circuit) you have an issue with the hdmi circuit.

 

[james-london]

The posted picture is very misleading when you have a 2 sec power on then power off. When you have a 2 second power on then off the southbridge goes into panic mode and doesn't re-enable those standby voltages on the hdmi circuit. It doesn't always mean (usually its not the hdmi circuit) you have an issue with the hdmi circuit.

Thanks @Johnny_debt On this occasion, this turned out to be a bad southbridge IC

 

[Johnny_debt]

Thanks @Johnny_debt On this occasion, this turned out to be a bad southbridge IC

But did you get a blue light when you tried to power on when your board was faulty?

 

[james-london]

But did you get a blue light when you tried to power on when your board was faulty?

No - no blue light.. nothing

 

[gavin25]

hello,i had a question! in my picture，i got a short from this chip.but i dont know this chip name.i want to buy it . help me please. thanks in advance!

 

[stetofix]

TI TPS53219A (https://www.ti.com/lit/ds/symlink/tps53219a.pdf?ts=1703589250325)

 

[carlohak]

Hi All.. after some advice. I have a PS5 Digital which is missing the voltages circled in red near the HDMI circuit. All other voltages are present and correct (across the entier board). Have replaced the HDMI encoder, and injected voltage, and checked for short around the area but cannot find the issue. Anyone experienced this before? Any pointers would be much appreciated. Thank you


View attachment 398449

I James, did you fix the problem?

Post automatically merged: Feb 14, 2024

Hi All.. after some advice. I have a PS5 Digital which is missing the voltages circled in red near the HDMI circuit. All other voltages are present and correct (across the entier board). Have replaced the HDMI encoder, and injected voltage, and checked for short around the area but cannot find the issue. Anyone experienced this before? Any pointers would be much appreciated. Thank you


View attachment 398449

I James, did you fix the problem?

 

[Samraku]

Hello, I find myself in the same situation.

@james-london & @carlohak Finally, is the southbridge for you?

Indeed when I read the UART codes I receive the error code indicating a problem with the HDMI IC. I really hope not because I have the CDX90069GG version, much rarer and more expensive.

I noticed a short circuit (0 to 60Ohm) only when I supply 12V to the board near the HDMI IC, behind it, near SB, behind it and close to the dialog chip still behind it

 

[Superman88]

Hi All.. after some advice. I have a PS5 Digital which is missing the voltages circled in red near the HDMI circuit. All other voltages are present and correct (across the entier board). Have replaced the HDMI encoder, and injected voltage, and checked for short around the area but cannot find the issue. Anyone experienced this before? Any pointers would be much appreciated. Thank you


View attachment 398449

Hello James. I have the exact same issue. I have been researching for weeks. All other voltage of same value present just not at those points. Did you ever figure yours out?

 

[Goagerd]

Hi All.. after some advice. I have a PS5 Digital which is missing the voltages circled in red near the HDMI circuit. All other voltages are present and correct (across the entier board). Have replaced the HDMI encoder, and injected voltage, and checked for short around the area but cannot find the issue. Anyone experienced this before? Any pointers would be much appreciated. Thank you


View attachment 398449

Hello, I unfortunately damaged a fuse when removing the HDMI IC, it is circled here, with 1.7V, what dimensions does it have

 

[cene]

Hello. I have PS5 with same issue. Somebody put the long screw on the power supply and it damaged the HDMI IC. Before I replace that chip console started to white light. Now only beeps and not starting. UART error is HDMI IC or power chain. There is no damaged traces outside but as far as I know the PS5 has at least 6 layers on the PCB board so I'm thinking may be some of inside layers are damaged. Somebody with same issue?