you can mod it, the only drawback is some type of no official software will not work, and some Sysmodules need to be updated yet.am i able to still hack my switch if i have 17.0 OFW ? or shall i wait until an officil release from Atmosphere
sorry for being dumb here
am i able to still hack my switch if i have 17.0 OFW ? or shall i wait until an officil release from Atmosphere
sorry for being dumb here
Why do you couldn't downgrade the SysNAND from 17.0.0 to 16.1.0?switch is hackable, its just that 17.0.0 requires more work than devs expected.
for now once you have hekate, atmosphere and emummc setup. you can just downgrade your current emummc (not the sysmmc) from 17.0.0 back to 16.1.0 using daybreak and after that, you can apply all those sigpatches for 16.1.0.
the end results here is, you sysmmc is still on 17.0.0 while your emummc is on 16.1.0 for homebrew and other stuff.
well you can if you havent managed to burn the fuses yet... check hekate what are your fuse values, if the fues values is still withing the same range from 16.x.x firmware, then you can downgrade but its probably going to be a ban risk at this point if you touch your sysmmc and downgrade it.Why do you couldn't downgrade the SysNAND from 17.0.0 to 16.1.0?
ok, but Atmosphère take care of the fuses, so if you have a high fuse count and you start your SysNAND using Atmosphère no problem at all.well you can if you havent managed to burn the fuses yet... check hekate what are your fuse values, if the fues values is still withing the same range from 16.x.x firmware, then you can downgrade but its probably going to be a ban risk at this point if you touch your sysmmc and downgrade it.
its my personal preference, why bother if your efuses is already burned anyway, just stick with emummc and do all you downgrades there, its much safer to begin with.ok, but Atmosphère take care of the fuses, so if you have a high fuse count and you start your SysNAND using Atmosphère no problem at all.
The problem is only when you start OFW from SysNAND.
no need to downgrade now, you can download latest sigpatches supporting FW 17Have you got a guide on how to downgrade. My switch is banned already so that won’t be an issue.
If I downgrade will that stop my switch from crashing?
So atmosphere has been updated to work now with 17.0 ? Do you have a guideno need to downgrade now, you can download latest sigpatches supporting FW 17
yeah, Atmosphère, Hekate, and Sigpatches are updated to support FW 17.0.0 you must to read the Atmosphère thread. for atmosphère you need to go to "tags" section on release page, because Atmosphère 1.6.1 is a prerelease and is not listed on latest release.So atmosphere has been updated to work now with 17.0 ? Do you have a guide
Sorted it. I managed to get into settings and turn my WiFi off . It don’t crash now all I need to know is how to install .nds filesHi
Ok I’ve tried again to hack using up to date files and I’m still getting the below error . What am I doing wrong here . Can anyone help me get past this crash
Thanks
Heyyeah, Atmosphère, Hekate, and Sigpatches are updated to support FW 17.0.0 you must to read the Atmosphère thread. for atmosphère you need to go to "tags" section on release page, because Atmosphère 1.6.1 is a prerelease and is not listed on latest release.
Have you blanked your prodinfo either via exosphere.ini og the incognito payload? That is known to cause that crash when wifi is accessed. That could also explain why your first issue was solved by disabling wifi
Another question. Do you use DNSmitm (default.txt or emummc.txt in atmosphere\hosts). If not then try to do that first. If that doesn't solve your issue then stop blanking your prodinfo and check again
If I delete the exosphere.ini file will that do anything ?How would I know if ive blanked my prodinfo? Sorry new to all this . My WiFi is disabled now and the switch boots up fine in atmosphere . It’s when I try to install tinfoil it’s saying corrupt data
I do have default.txt in hosts folder
Cheers
Stop using Tinfoil, use DBI installer insteadHow would I know if ive blanked my prodinfo? Sorry new to all this . My WiFi is disabled now and the switch boots up fine in atmosphere . It’s when I try to install tinfoil it’s saying corrupt data
I do have default.txt in hosts folder
Cheers
Post automatically merged:
If I delete the exosphere.ini file will that do anything ?
Going to swing an looking for your serial number, but it's very probable you are because you're getting the crash.How would I know if ive blanked my prodinfo?
Yeah but keep DnsMITM, and/or use DNS90 for testingIf I delete the exosphere.ini file will that do anything ?