Hacking SWITCH NOOB PARADISE - Ask questions here

[Hayato213]

FAT32

If you tried newer CFW files and it still won't boot, you probably just going have to make a new emunand.

 

[Rostodon]

If you tried newer CFW files and it still won't boot, you probably just going have to make a new emunand.

It does boot into emuMMC when I first add them, but when I reboot it gets stuck on the black screen.

 

[Hayato213]

It does boot into emuMMC when I first add them, but when I reboot it gets stuck on the black screen.

Try another card I guess since emunand run off the card.

 

[MrMrMr]

I'm on 16.0.3 and found it tough to get it hacked, and the way I want it. I just use it for games off SD, and retroarch.

I now have a basic setup with Hekate/Atmosphere, and boot to CFW sysMMC.

I have a few other apps on, DBI and AIO (v2.23.1). I've opened AIO (never used) and has "update firmwares" and lists v16.1.0 in a few sites, also has Hekate etc to update, is this safe to update and run from here?

Also has update Atmosphere, all I know is I have hekate 6.05, Atmosphere 1.5.4, which order should you do it all in?

Any help please

 

[desgrassia]

Hi everybody,

for more than one reason I stopped using my Switch much time ago, and I am now trying to get up to date so I can mod it again with the latest releases.

I have been reading some pages of this and other threads but the more I go on, the less I have a clue on what the best choice would be for me.

I am not sure if the best course would still be to keep the NAND firmware at the lowest possible version, while having updates applied to the "virtual" file system on top of the custom OS.

You can see by the following quote where I was when I last came here asking for help... as you can see it was waaaaay long time ago.

Anyway, what I would like to achieve would be: being on the lastest firmware and able to go online for multiplayer etc. while preserving all that might be useful to exploit my old hardware

I hope my mind is not too much confused and that at least I have been able to explain what I want (sort of, at least).

Thank you!

So, now I am happily running my Switch with ReiNX, with firmware 5.1 updated using ChoiDujourNX over my original 2.3.0. I am still on Airplane mode since before upgrading, and I also have my full NAND backup done before ever running any Custom OS.

I read some recent posts and since I would like to upgrade to Switch OS 6.2 to run latest games and updates (i.e. SSBU) I am unsure on what the safest way would be. I am also tempted of moving from ReiNX to Atmosphere. Also, I read that now it would be somewhat "better" using Fat32 instead of ExFAT.

So, first question is: should I just update ReiNX files on my SD card and then maybe upgrade again with ChoiDujourNX to 6.2, and keep my ExFAT microSD and everything else?

If you think I should better change my setup, should I first restore my NAND backup, format my microSD again (btw, why is that better? and how do I manage .nsp files or other ones larger than 2 GB?) then start again as a "fresh" hack?

Also worth mentioning, when I "hacked" my Switch I absolutely forgot about the gamecard slot and then I used it with an original game after updating. So, now, I am pretty sure its firmware has been updated and I cannot go back, is that the case? How can I check if it has in fact been updated? Did I lose any chance of using a possible future exploit for a non-RCM-based hack in future running on firmware 2.3.0?

Thank you again for any answers you will provide me with, as always

 

[wownmnpare]

This is kinda dumb question lol but is it safe to overclock in handheld mode while using powerbank as a charger? im using erista and my overclock seeting is cpu=1224/gpu=768/mem=1600

 

[Draxzelex]

I'm on 16.0.3 and found it tough to get it hacked, and the way I want it. I just use it for games off SD, and retroarch.

I now have a basic setup with Hekate/Atmosphere, and boot to CFW sysMMC.

I have a few other apps on, DBI and AIO (v2.23.1). I've opened AIO (never used) and has "update firmwares" and lists v16.1.0 in a few sites, also has Hekate etc to update, is this safe to update and run from here?

Also has update Atmosphere, all I know is I have hekate 6.05, Atmosphere 1.5.4, which order should you do it all in?

Any help please

Do NOT use the AIO app. I'd highly recommend deleting it immediately. Its notorious for causing issues so avoid it altogether. Instead, I would advise you to update everything manually which is better in the long run because not only will this teach you how to troubleshoot errors in the future but its better than using a tool to update.

Hi everybody,

for more than one reason I stopped using my Switch much time ago, and I am now trying to get up to date so I can mod it again with the latest releases.

I have been reading some pages of this and other threads but the more I go on, the less I have a clue on what the best choice would be for me.

I am not sure if the best course would still be to keep the NAND firmware at the lowest possible version, while having updates applied to the "virtual" file system on top of the custom OS.

You can see by the following quote where I was when I last came here asking for help... as you can see it was waaaaay long time ago.

Anyway, what I would like to achieve would be: being on the lastest firmware and able to go online for multiplayer etc. while preserving all that might be useful to exploit my old hardware

I hope my mind is not too much confused and that at least I have been able to explain what I want (sort of, at least).

Thank you!

The simplest way to achieve what you desire is by creating an emuMMC partition using Hekate then updating it to the latest firmware to go online with using Atmosphere.

 

[testing123]

I accidentally let the battery run out on the switch. Currently it's on, but games read as corrupted since it didn't load into CFW.

It's been a few years since I hacked it, and I can't remember how to reboot back into CFW.

What is the best method to reboot back into Hekate/CFW?

Thanks in advance.

Edit-Update, I reinjected fusee.bin with tegra and it works.

However...Zelda TOTK still says corrupted data even in CFW.

This was fixed by doing the "check for corruption" in the switch itself.

 

[Aidthorin]

Can you help me? I'm trying to do wipe but it gets stuck at the very beginning

 

[KinoyoFNA]

I installed my first NSP recently through Goldleaf onto my SD memory on emuNAND. From my understanding from research, it should be separate from my stock FW, even considering they both physically share the same SD card. However, when I boot into stock FW, I can see the NSP I installed. Is this normal? I feel like I may get banned if I go online at all, regardless if I ever open the NSP or not.

 

[Hayato213]

I installed my first NSP recently through Goldleaf onto my SD memory on emuNAND. From my understanding from research, it should be separate from my stock FW, even considering they both physically share the same SD card. However, when I boot into stock FW, I can see the NSP I installed. Is this normal? I feel like I may get banned if I go online at all, regardless if I ever open the NSP or not.

You probably installed on sysnand.

 

[KinoyoFNA]

You probably installed on sysnand.

Thank you for the quick reply! I double-checked, and it installed to both the emuNAND and the sysNAND. So I deleted it (through the menu in-game, *but that doesn't seem to delete the update file) and tried a reinstall again on emuNAND, but this time choosing internal memory rather than SD. Same issue; it seems to install to both emuNAND and sysNAND. Not exactly sure what I'm doing wrong at this point

*EDIT: It definitely did take off the update as well, because it prompted me to update, so disregard that part

 

[Hayato213]

Thank you for the quick reply! I double-checked, and it installed to both the emuNAND and the sysNAND. So I deleted it (through the menu in-game, but that doesn't seem to delete the update file) and tried a reinstall again on emuNAND, but this time choosing internal memory rather than SD. Same issue; it seems to install to both emuNAND and sysNAND. Not exactly sure what I'm doing wrong at this point

Make sure your install is pointed at the SD card not the internal storage, but the internal storage should be seperated if you are using an emunand, you sure you have an emunand, what is your system string? S or E?

 

[KinoyoFNA]

Make sure your install is pointed at the SD card not the internal storage, but the internal storage should be seperated if you are using an emunand, you sure you have an emunand, what is your system string? S or E?

Okay I see the problem now, the string does have an S on the end. That's weird though, I remember for sure making a separate emuNAND partition. At this point I just need to go make another one then (correctly)?

 

[Hayato213]

Okay I see the problem now, the string does have an S on the end. That's weird though, I remember for sure making a separate emuNAND partition. At this point I just need to go make another one then (correctly)?

You got a clean NAND to restore to if you wanted a clean NAND?

 

[KinoyoFNA]

You got a clean NAND to restore to if you wanted a clean NAND?

Yes, I backed it up before hacking. I think my issue was I created an emuNAND but never created the emuMMC partition, which I'm doing now

 

[Hayato213]

Yes, I backed it up before hacking. I think my issue was I created an emuNAND but never created the emuMMC partition, which I'm doing now

Well make a backup of current sysnand, then restore the clean sysnand, then do the emunand again.

 

[KinoyoFNA]

Well make a backup of current sysnand, then restore the clean sysnand, then do the emunand again.

Will do, thank you for all the help!

 

[prof72]

how to fix tinfoil?
i just started playing again


also maybe you know how to fix this game;

Wartales NSP​

ID= 010055501B14C000 (America, Europe)
US (eng), FR, DE, SPA, RU, CH

i just dowloaded the base game (eshop) 8GB
with Update 1.0.28108 (v65536)

i install both, once launch it closed down
and asking for "checking" for corrupted
done that 3x and still not working

i deleted the update and reset required version
asking again for "checking" for corrupted
done that 3x and still not working

deleted the game
copy paste the file
install again
with or without update
not working


help.. any idea would be appreciated

Post automatically merged: Sep 30, 2023

i found the problem,

im using;
Current version: 15.0.1 | AMS 1.5.0|S

while the games needs ;

Required firmware

Base=16.0.3 / UPD=16.0.3 (Atmosphere or SXOS)(Sigpatches)

I have AIO Switch Updater
but what should i update first?
(i know that if i got the wrong order, i may not be able to use my switch until i wait for the latest new release update or other problems)

Update Atmosphere
Update bootloaders
Update sigpatches
Download firmwares
Tools (update the app v2.23.1)

 

[literallyMe]

Hey, question, is there a way to backup/restore user data in an athmosphere modded switch? not game saves, but games playtimes and such