how would i install android 11 without loosing everything someone told me if i back up my sd card then install android then put everything back on i wont be able to play the games on the cfw is this correct ?
how would i install android 11 without loosing everything someone told me if i back up my sd card then install android then put everything back on i wont be able to play the games on the cfw is this correct ?
Well, solved this. Turns out the issue was my VM networking setup. Now I'm having nxlink printing different information? Sometimes it prints debug info, other times not. For example:Hey guys, quick question. I can't seem to get printf or any output redirected to nxlink. I'm making some modifications to SimpleModDownloader. It uploads to the netloader fine and runs, nxlink says the server is active, but I never see any output. I've also tried building the switch-examples that output to nxlink and once again, printf, trace, cout, nothing gets printed nxlink side. I'm on latest firmware, and hbmenu 3.5.1. Latest devkit on Linux.
> nxlink -a 192.168.254.157 SimpleModDownloader.nro -s
Sending SimpleModDownloader.nro, 9571377 bytes
3885830 sent (40.60%), 338 blocks
starting server
server active ...
[DEBUG] Switching to the first tab
[DEBUG] Showing 9MainFrame with animation 0
[DEBUG] Showing N4brls4HintE with animation 0
[DEBUG] Giving focus to N4brls8ListItemE
[INFO] Window size changed to 1280x720
[INFO] New scale factor is 1.0
[DEBUG] Giving focus to N4brls8ListItemE
[DEBUG] Giving focus to N4brls8ListItemE
[DEBUG] Giving focus to N4brls8ListItemE
[DEBUG] Giving focus to N4brls8ListItemE
[DEBUG] Giving focus to N4brls8ListItemE
exiting ...
> nxlink -a 192.168.254.157 SimpleModDownloader.nro -s
Sending SimpleModDownloader.nro, 9571377 bytes
3885830 sent (40.60%), 338 blocks
starting server
server active ...
[INFO] GL Vendor: nouveau
[INFO] GL Renderer: NV120
[INFO] GL Version: 4.3 (Core Profile) Mesa 20.1.0-rc3
[INFO] Gamepad detected: Nintendo Switch Controller
[INFO] Window size changed to 1280x720
[INFO] New scale factor is 1.0
[INFO] Adding Switch shared standard font
[INFO] Non applet mode, font full fallback is enabled!
[INFO] Adding Switch shared S.Chinese font
[INFO] Adding Switch shared S.Chinese extended font
[INFO] Adding Switch shared T.Chinese font
[INFO] Adding Switch shared Korean font
[INFO] Using Switch shared standard font as regular
[INFO] Using Switch shared symbols font
[INFO] Using shared symbols font
[WARNING] Material font not found
[INFO] Maximum FPS set to 60 - using a frame time of 16.67 ms
My Switch got nuked because I didn't back the NAND up after messing with Atmosphere lol
Looking to mod my V2 switch but am unsure where to start at present, mostly wondering which chip i should buy and from which seller, also curious about installation instructions, any help is greatly appreciated
Why there are some games that I cant install? It appears in tinfoil at "new games", but when I try to install, it is stucked at 0% and does nothing. It's like half games will actually install and half of them wont. (all are nsp and copying with USB, SD is exfat)
If you don't have an Android device, I'm going to assume you have an iOS device. In that case, you can try using NXBoot. If that doesn't work, worst case scenario is you can buy an external payload launcher such as the RCM Loader to inject a payload.I tried using TegraRCMSmash as well. Still didn't work. I would've tried one of those Android payload injectors because someone suggested that to me, but I don't have an Android. Regardless, I still tried using TegraRCMSmash again, using the link you sent, but Zadig can't even find a device called "APX," and it doesn't show up in Device Manager either.
NAND backups are console specific. You can try wiping the SD card and hope that the serial number is being blanked using exosphere and not Incongito because if Incognito was used on the sysMMC without a backup, then the console is functionally banned.I figured I should ask this here instead of making a thread but I need some help here.
I've had a modded switch (v1 through a jig) and ended up getting a second one recently, but this one was patched so I ended up hiring someone to install picofly on it in order to access atmosphere and all. The problem is that this person never specified to me what came in the folders he used and it only came with a Stock and EmuMMC layout on hekate, I tried making a SysMMC in order to access certain content on it but it turns out that this came with Incognito by default and said SysMMC doesn't have a serial code anymore, is it possible to use any nand backup from my other switch in order to have a working SysMMC, or restart the hekate setup and wipe the SD card (I don't mind following the switch hack guide from the beginning or losing my SD files since I can just backup those) in order to start over with a proper SysMMC and EmuMMC? I thought I'd ask instead of recklessly doing something that could brick this system.
You can try looking on Switchbrew. You can also trying on ReSwitched on their Discord server.Is there a good detailed resource for the Switch OS security and what steps it takes to keep everything completely airtight? It seems like most results I get are desperate people begging for a softmod with not very helpful answers.
I followed the homebrew guide on my unpatched Switch and it went smoothly. Then I installed Tinfoil and NUT to transfer games until I realized that the Tinfoil was installed on sysMMC and not emuMMC. I connected to the Wi-fi, but I did not opened E-shop.
I decided to reset the NAND and it went well. I followed the guide again but when I uppdated Hekate and Atmosphere and rebooted the switch it wont turn on.
I have tried regular and hard reset using the power button. When I place it in the dockstation, the green light blink/flash one fast time. I also tried disconnect the battery but the problem still remains.
Anyone have and idea what I can do or had similar problem?
Hi! I am new to switch modding. I bought a modchip
and asked a local store to install. I upload a picture of the sd insert screen. The modchip seller disappeared so I can't
know the firmware version. By this screen is it possible to
guess?
Also, what should I do next? Do I need to install a
emunand and make nand backup? I believe I need hekate, atmosphere and
tinfoil. Is there a guide for this? I remember seeing a
very compreensive before but I can't locate it. Ty for the
attention!