Hacking [Release] PS-Phive! (For PS4 FW 9.00) Exploit Host Menu

[Nora999]

Hi Ive tried all three online web exploits all three address it failed at loaded the Web kit exploit it cached it just fine I tried the self hosting for my pc went to address shown on pc failed at same point what dns address should you be using what files goes on the USB drive I thought that was just for board users cheers my hard drive is just fine I loaded the older leaful exploit 2.1 something like that worked first go

Post automatically merged: Feb 13, 2023

Hi is this for ps4 firmware version 9.0 would i have to update from 5.05 to 9.0 then run this my mistake if so cheers

 

[Leeful]

Hi is this for ps4 firmware version 9.0 would i have to update from 5.05 to 9.0 then run this my mistake if so cheers

Heres a clue:
The title of this thread is "[Release] PS-Phive! (For PS4 FW 9.00) Exploit Host Menu".
When you run it on your PS4 it says "PS-Phive! v3 (FOR PS4 FW v9.00) By Leeful" at the top of the screen.

 

[warriosbest]

does that esp32 image work for 6.72 too? ty

 

[Leeful]

does that esp32 image work for 6.72 too? ty

No. The actual PS-Phive! menu is not on the esp. The esp is just used for the 9.00 exploit part.

 

[eemcmCL]

Is it too much to ask for a light version? without the game mods?

I'm looking at the option to leave ps phive only with automatic loading of goldhen 2.3 (without previous versions) and eliminate game mods, so that all the necessary files fit in the esp32 flash memory.

So far, compressing the files, removing the game mods and leaving only goldhen 2.2.2, 2.2.4 and 2.3, the folder is 1.71 MB. I am going to change the partition scheme of the esp32 and do some tests.

I hope it will work with my sketch as I don't know how the ps phive sketch is coded.

is there a possibility of a cheat-free release of GTA and rdr? i tried to do a few things on my own and it didn't work.

 

[Msafari98]

Can I use ESP32-S3 for PS4 9.00 auto USB?

 

[warriosbest]

No. The actual PS-Phive! menu is not on the esp. The esp is just used for the 9.00 exploit part.

hmm i thought there was a newer version of 6.72 with newer goldhen,etc..
look like pc-pi-etc..selfhost is only option for newest goldhen in 6.72

i'm still using ps hive 6.72 for esp8266, it still work but i'm running henb instead goldhen

 

[zetsu]

I'm currently wondering what makes the S2 the preferred board for this task...
What does it do better or what spec is actually needed compared to other (older) boards?
I have the ESP32-S DevKitC v4 at hand, WiFi is working on it. So is there a way to use this one? @Leeful

 

[Maupiti]

I'm currently wondering what makes the S2 the preferred board for this task...
What does it do better or what spec is actually needed compared to other (older) boards?
I have the ESP32-S DevKitC v4 at hand, WiFi is working on it. So is there a way to use this one?

Coding, all S2 are “light “, with no extra usb ports , so basically just a very efficient dongle for jailbreak

I started 9.00 jailbreak (coming from 6.72 always with @Leeful hosts and @Prb) with Pi-zero 2 project, great, but way too powerful for the purpose).
For the jailbreak, I would recommend @Leeful Ps-Phive! host and his bin image for ESP32.
99% success rate on my PS4 Pro , no KP even if the jailbreak fails for some reason.
https://gbatemp.net/threads/release-ps-phive-for-ps4-fw-9-00-exploit-host-menu.621028/

This is a very nice ESP32 dongle to use :

View attachment 352689
View attachment 352690

was using esp32-S2 mini before, a bit cheaper, but this one works perfect and already in a case.

https://fr.aliexpress.com/item/1005...!sea!FR!3466579295&curPageLogUid=ECAaYYNuteQG

 

[zetsu]

Excuse me, but i didn't ask where to get the S2. I want to use the board i have (DevKitC v4), if possible.
I thought it might have to do with some function the S2 provides or some specs.

The USB stick i've used to trigger the exploit with Karo's host works on Leeful's host as well. Even better than before.

 

[Maupiti]

Excuse me, but i didn't ask where to get the S2. I want to use the board i have (DevKitC v4), if possible.
I thought it might have to do with some function the S2 provides or some specs.

The USB stick i've used to trigger the exploit with Karo's host works on Leeful's host as well. Even better than before.

Dunno if your board could be compatible, you can try to flash the bin and see if it works
I used a modified bin from @Leeful made for S2 mini and flashed it to the dongle I linked, and it worked perfectly (except timing of the led )
That’s why I said coding

If your usb stick works perfect, what’s the point of using a wifi board ?

 

[zetsu]

If your usb stick works perfect, what’s the point of using a wifi board ?

The automation of the exploit. Leaving it plugged in all the time.
With the USB you have to plug it in, press a button+pull it out/pull it out+press a button.

 

[Maupiti]

The automation of the exploit. Leaving it plugged in all the time.
With the USB you have to plug it in, press a button+pull it out/pull it out+press a button.

That’s why a lot of people go to S2

 

[Msafari98]

At last I bought ESP32-S2 and cached the host and here is my feedback

first of all, thanks a lot for your efforts

• Please make lite version for example only GoldHEN just like Karo-goldHEN9.00
• I think animation maybe can effect on KP so if that's possible please remove animations
• and also on v3 since you delete alert codes I have too many KP on USB mode
• Honestly I prefer PS-Phoar! or Al-Azif UI over PS-Phive so please implement these on phoar/Al-Azif if thats possible
• when you open browser, Webkit goes to load automatically, what if you implement a start button! why? sometimes when you open browser it stays on white screen then ask you to plug USB/running exploit, in this situation the chance that you get KP is higher (I Can be your beta tester if you want)
• is there any html code to prevent Browser's "The page stopped responding..." error? it would be awesome to trick the browser that page is running

Report Bug

• Maybe I'm doing something wrong but when you selfhost the ps-phive and then connect the ps4 to esp, you cannot use esp settings anymore it shows you a blank page or shows "there in no esp connected" error which is connected and works during exploit ( I want to change usb wait time to 5000ms but cannot enter esp.html)

 

[Leeful]

Report Bug

• Maybe I'm doing something wrong but when you selfhost the ps-phive and then connect the ps4 to esp, you cannot use esp settings anymore it shows you a blank page or shows "there in no esp connected" error which is connected and works during exploit ( I want to change usb wait time to 5000ms but cannot enter esp.html)

Thanks for the feed back.

I just tried self hosting to check and it works fine for me.

I notice in the image you attached that your browser is pointed at 10.1.1.1/index.html. That doesnt seem right.

10.1.1.1 is the ip of the esp network. it should be the IP of the computer that you self hosted the install files on.

e.g This is mine:


192.168.0.5 is the ip of my PC that I installed the menu from and 10.1.1.1 is the ip of the esp network which I connected to after I installed the menu from my self host on the PC.

I tested going the settings page by pressing X before the webkit starst to load and by going to the button in the menu and both worked.

 

[Msafari98]

Thanks for the feed back.

I just tried self hosting to check and it works fine for me.

I notice in the image you attached that your browser is pointed at 10.1.1.1/index.html. That doesnt seem right.

10.1.1.1 is the ip of the esp network. it should be the IP of the computer that you self hosted the install files on.

e.g This is mine:
View attachment 360196

192.168.0.5 is the ip of my PC that I installed the menu from and 10.1.1.1 is the ip of the esp network which I connected to after I installed the menu from my self host on the PC.

I tested going the settings page by pressing X before the webkit starst to load and by going to the button in the menu and both worked.

Thanks it worked now, thanks for answering

 

[bloodgnome]

Strangly with my PS4 Pro 7016 on 9.0 it doesn't work.

I allways get a Error on the Kernel Exploit. Either it hangs and shows NaN or it simply tells me it failed and i should try and reboot.

I tried both the standard USB Version as well as the ESP (1 and 2) Variants at least 10-15 times. Cleared the Browser Data and Cookies ect.

Why is that ? Other Exploit sites work much better but have older HEN ect.

 

[Maupiti]

Strangly with my PS4 Pro 7016 on 9.0 it doesn't work.

I allways get a Error on the Kernel Exploit. Either it hangs and shows NaN or it simply tells me it failed and i should try and reboot.

I tried both the standard USB Version as well as the ESP (1 and 2) Variants at least 10-15 times. Cleared the Browser Data and Cookies ect.

Why is that ? Other Exploit sites work much better but have older HEN ect.

Well, not sure it will help you, but on my Pro 7216B I have 99% success rate. Do you have an extended storage plugged in or any other usb device connected when you do the jailbreak ?
Did you cleaned cache/cookies on the browser ?

 

[bloodgnome]

Well, not sure it will help you, but on my Pro 7216B I have 99% success rate. Do you have an extended storage plugged in or any other usb device connected when you do the jailbreak ?
Did you cleaned cache/cookies on the browser ?

No extended storage plugged or other usb device. And yes: cleaned cache/cookies.

 

[Maupiti]

No extended storage plugged or other usb device. And yes: cleaned cache/cookies.

What you can try, is shutdown your console, unplug it from power for at least 1 minute see if it’s better. Also try to cache the menu again , cleaning everything,before maybe something went wrong on the first cache