Hacking SWITCH NOOB PARADISE - Ask questions here

[Baoh]

The atmosphere updater no longer work, it has been archived, so update your cfw files manually.

https://github.com/CTCaer/hekate/releases/tag/v6.0.1
https://github.com/Atmosphere-NX/Atmosphere/tree/1.4.0

Hemm You 2 say different things there is a good pack then I can delete all my root folder and copy all the file?

 

[Livebythecoin]

Me again.

So I’ve just completed a fusee-gelee setup for my switch, using the sd setup recommended settings per the guide.

When injecting the Hekate payload I’m getting the following error messages on the switch;

Missing LP0 (sleep) lib!

Missing Minerva lib!

Update bootloader folder!


I kinda thought the recommended settings would be everything I needed to make it work so didn’t tick any extras. Can anyone help?

 

[Hayato213]

Me again.

So I’ve just completed a fusee-gelee setup for my switch, using the sd setup recommended settings per the guide.

When injecting the Hekate payload I’m getting the following error messages on the switch;

Missing LP0 (sleep) lib!

Missing Minerva lib!

Update bootloader folder!


I kinda thought the recommended settings would be everything I needed to make it work so didn’t tick any extras. Can anyone help?

Make sure hekate files is on your SD card

https://github.com/CTCaer/hekate/releases/tag/v6.0.1

 

[Baoh]

No, that is very far from a good pack. I would highly recommend you stay away from it.

Sorry guys I don't know how to replay at all of you in one post
There is in your opinion a good pack to do copy and paste in root folder

 

[Draxzelex]

Tx I have find a pack I can try with it.
https://github.com/sthetix/HATS/releases

Speaking from personal experience, many people have issues when using that pack. If you have problems and come back here asking for help, the first thing I will recommend is to delete it.

Me again.

So I’ve just completed a fusee-gelee setup for my switch, using the sd setup recommended settings per the guide.

When injecting the Hekate payload I’m getting the following error messages on the switch;

Missing LP0 (sleep) lib!

Missing Minerva lib!

Update bootloader folder!


I kinda thought the recommended settings would be everything I needed to make it work so didn’t tick any extras. Can anyone help?

Those are the hekate files that are supposed to go onto your SD card. Did you actually download them then put them on the SD card?

 

[Hayato213]

Hemm You 2 say different things there is a good pack then I can delete all my root folder and copy all the file?

You can use HATS if you want too, just that HATS is pre built pack, so you should learn how it work, also you could also learn how to manually update your system files

https://gbatemp.net/threads/how-to-hekate-chainload-vanilla-atmos.563255/

This thread shows you how to setup an atmosphere setup from scratch, just replace fusee-primary.bin wtih fusee.bin and fusee_secondary.bin with package3.

The thing here is that you can use HATS if you know how CFW files work, because deepsea, SD setup, HATS they are all fss0 packs.

 

[Baoh]

You can use HATS if you want too, just that HATS is pre built pack, so you should learn how it work, also you could also learn how to manually update your system files

https://gbatemp.net/threads/how-to-hekate-chainload-vanilla-atmos.563255/

This thread shows you how to setup an atmosphere setup from scratch, just replace fusee-primary.bin wtih fusee.bin and fusee_secondary.bin with package3.

The thing here is that you can use HATS if you know how CFW files work, because deepsea, SD setup, HATS they are all fss0 packs.

Its always better to update by hand than using an external application. You can also download the latest Hekate from here.

The atmosphere updater no longer work, it has been archived, so update your cfw files manually.

https://github.com/CTCaer/hekate/releases/tag/v6.0.1
https://github.com/Atmosphere-NX/Atmosphere/tree/1.4.0

Speaking from personal experience, many people have issues when using that pack. If you have problems and come back here asking for help, the first thing I will recommend is to delete it.

Those are the hekate files that are supposed to go onto your SD card. Did you actually download them then put them on the SD card?

You can use HATS if you want too, just that HATS is pre built pack, so you should learn how it work, also you could also learn how to manually update your system files

https://gbatemp.net/threads/how-to-hekate-chainload-vanilla-atmos.563255/

This thread shows you how to setup an atmosphere setup from scratch, just replace fusee-primary.bin wtih fusee.bin and fusee_secondary.bin with package3.

The thing here is that you can use HATS if you know how CFW files work, because deepsea, SD setup, HATS they are all fss0 packs.

Ok, I have fdind this guide
https://nh-server.github.io/switch-guide/extras/updating/

it seams easy Now I will try
I will backup all the SD folder the in case of faild, I can back

Now I must find a no bugged CWF

 

[NitroHedgehog]

It's me.

I formatted my 64gb sd card to FAT32, re-added the needed files, plus I added the needed sigpatches. Hekate works fine, but even after partitioning my SD Card to half for emuNAND and creating emuMMC, my PC doesn't read the SD card being "split" in two like before... I thought Hekate was the problem of my CFW being too slow, so I used 5.9.0 instead. My switch is up to date (15.0.1) but probably banned because the previous owner did "stupid things" like using NSFW Miis in online games (he got kicked out many times from Nintendo's online servers before) or other stuff I don't wanna hear about...

Guide I always use - https://nh-server.github.io/switch-guide/user_guide/emummc/sd_preparation/

Is this guide up to date? If not, what should I use?

 

[Baoh]

HI Guys the System tell me that there is missing some Atmosphere file
Maybe the fusee.bin?
https://github.com/Atmosphere-NX/Atmosphere/releases
I came from the version 9 of atmosphere and the guide tell me

-----------
Updating from below Atmosphere 1.0.0
If you update from below Atmosphere 1.0.0, there are additional steps to follow. You will have to delete the sept folder from your sd, delete fusee-secondary.bin from your atmosphere folder and update your hekate config file: hekate_ipl.ini in the bootloader folder.
----------------------------

Is it correct?

 

[waz]

Went to boot up the lastest atmosphere with hekate, and my emummc wont boot anymore. Gets stuck on the nintendo switch screen. Sysnand boots fine. Nothing ive done seems to work. Anything I should do at this point besides follow the unbrick guide? Dont want to lose my saves

 

[binkinator]

It's me.

I formatted my 64gb sd card to FAT32, re-added the needed files, plus I added the needed sigpatches. Hekate works fine, but even after partitioning my SD Card to half for emuNAND and creating emuMMC, my PC doesn't read the SD card being "split" in two like before... I thought Hekate was the problem of my CFW being too slow, so I used 5.9.0 instead. My switch is up to date (15.0.1) but probably banned because the previous owner did "stupid things" like using NSFW Miis in online games (he got kicked out many times from Nintendo's online servers before) or other stuff I don't wanna hear about...

Guide I always use - https://nh-server.github.io/switch-guide/user_guide/emummc/sd_preparation/

Is this guide up to date? If not, what should I use?

I recommend always https://rentry.org/SwitchHackingIsEasy

Post automatically merged: Dec 27, 2022

Went to boot up the lastest atmosphere with hekate, and my emummc wont boot anymore. Gets stuck on the nintendo switch screen. Sysnand boots fine. Nothing ive done seems to work. Anything I should do at this point besides follow the unbrick guide? Dont want to lose my saves

You aren’t bricked. Please share the contents of your /bootloader/haekate_ipl.ini file.

When you upgraded, did you upgrade your fusee.bin?

https://rentry.org/SwitchHackingIsEasy

Post automatically merged: Dec 27, 2022

HI Guys the System tell me that there is missing some Atmosphere file
Maybe the fusee.bin?
https://github.com/Atmosphere-NX/Atmosphere/releases
I came from the version 9 of atmosphere and the guide tell me

-----------
Updating from below Atmosphere 1.0.0
If you update from below Atmosphere 1.0.0, there are additional steps to follow. You will have to delete the sept folder from your sd, delete fusee-secondary.bin from your atmosphere folder and update your hekate config file: hekate_ipl.ini in the bootloader folder.
----------------------------

Is it correct?

Yes, that is absolutely correct. Those files are outdated.

https://rentry.org/SwitchHackingIsEasy

 

[waz]

I did update fusee. Contents of the ini file attached

 

[binkinator]

I did update fusee. Contents of the ini file attached

Change updater2p=1

This will ensure you’re using the update.bin file included w/ Hakate.x.x.x.zip

E: also, move/rename your /atmosphere/contents folder to /atmosphere/contents.bk and try a reboot into CFW

 

[Baoh]

I recommend always https://rentry.org/SwitchHackingIsEasy

Post automatically merged: Dec 27, 2022

You aren’t bricked. Please share the contents of your /bootloader/haekate_ipl.ini file.

When you upgraded, did you upgrade your fusee.bin?

https://rentry.org/SwitchHackingIsEasy

Post automatically merged: Dec 27, 2022

Yes, that is absolutely correct. Those files are outdated.

https://rentry.org/SwitchHackingIsEasy

I have deleterd all atmosphere folder and copy all the new one, Now I try some game

 

[binkinator]

I have deleterd all atmosphere folder and copy all the new one, Now I try some game

Make sure you updated your Sigpatches afterwards.

Sigpatches (GBATemp) — get your Sigpatches here!

 

[waz]

Change updater2p=1

This will ensure you’re using the update.bin file included w/ Hakate.x.x.x.zip

E: also, move/rename your /atmosphere/contents folder to /atmosphere/contents.bk and try a reboot into CFW

No dice with updater2p=1, same issue. Dont have a contents folder, should I? Root of sd attached and inside of atmosphere folder.

 

[binkinator]

No dice with updater2p=1, same issue. Dont have a contents folder, should I? Root of sd attached and inside of atmosphere folder.

No worries…that’s just the most common issues. If they are not there you are good to go.

Let’s do this. Temporarily rename/move /atmosphere to /atmosphere.bk and then unzip the latest atmosphere.x.x.x.zip again at the root of your SDCard. You will need to apply Sigpatches again so go ahead and do that too.

Sigpatches (GBATemp) — get your Sigpatches here!

 

[waz]

No worries…that’s just the most common issues. If they are not there you are good to go.

Let’s do this. Temporarily rename/move /atmosphere to /atmosphere.bk and then unzip the latest atmosphere.x.x.x.zip again at the root of your SDCard. You will need to apply Sigpatches again so go ahead and do that too.

Didnt work

 

[binkinator]

Didnt work

Interesting. You didn’t upgrade Firmware yet, did you?

Still thinking what this could be…in the mean time go ahead and make a backup of your emunand using Hekate (there is a button to do emunand instead of Sysnand)

E: while you are in there, run the Fix Archive Bit button in Hekate (under the Tools Menu) and note if any errors are reported.

 

[waz]

Interesting. You didn’t upgrade Firmware yet, did you?

Still thinking what this could be…in the mean time go ahead and make a backup of your emunand using Hekate (there is a button to do emunand instead of Sysnand)

E: while you are in there, run the Fix Archive Bit button in Hekate (under the Tools Menu) and note if any errors are reported.

Correct. Emummc firmware is on 14.1.2 (unsure which rebootless update as I used AIO when I did it)
Sysnand is on 9.1.0
No errors reported from Fix Archive Bit