Here is how to fix the 3D slider brick using ntrboot without doing a full ctrtransfer:
A second working 3DS is needed, or you can have someone dump the file in step 1-3 from their console and share it. Would this file be allowed to post here? If so it could be added to the instructions. Should be fine, right? It's just system config savedata.
Instructions
A second working 3DS is needed, or you can have someone dump the file in step 1-3 from their console and share it. Would this file be allowed to post here? If so it could be added to the instructions. Should be fine, right? It's just system config savedata.
Instructions
- Load GodMode9 on the working console from ntrboot/B9S
- From the root GodMode9 menu, navigate to [1:] SYSNAND CTRNAND -> data -> {a folder with random numbers} -> sysdata -> 00010017
- Select 00000000, then select Copy to 0:/gm9/out
- Press START+R to power off the 3DS and copy this file to the SD card in the bricked console
- Load GodMode9 on the bricked console
- Navigate to [0: ] SDCARD and find the file you copied
- Press Y on the file to copy it
- Back out until you are back at the main screen and again navigate to [1:] SYSNAND CTRNAND -> data -> {a folder with random numbers} -> sysdata -> 00010017
- Press Y again to paste and unlock writing according to the onscreen instructions, relock when done
- Press A on the file you just copied and select Calculate CMAC
- Press START to reboot
- Go in System Settings and change anything that's wrong such as birthday, nickname etc. since the settings will be cloned from the working console.
- ( ͡° ͜ʖ ͡°)
Last edited by The Real Jdbye,