i boot into rcm with a tinfoil bridging pin 9 and 10, i know its in rcm because it won't show the boot logo, and if I press power again it wont do anything and have to preds it for 10 seconds (exit rcm)
Had the same problem here.
Turn your switch normally on. Connect the USB C cable to pc. I assume you have Windows 10? Then you should here the typical device detected sound. Wait untill Windows "installed" switch drivers.
After that load: https://github.com/rajkosto/TegraRcmSmash
The readme file was super helpful to me.
Turn off the switch. No go RCM Mode. After that connect to USB C. You should now hear that Windows Device connected sound from Windows.
Now follow that:
PS: Did also the "thinfoil Thing" and it worked perfectly
Turn your switch normally on. Connect the USB C cable to pc. I assume you have Windows 10? Then you should here the typical device detected sound. Wait untill Windows "installed" switch drivers.
After that load: https://github.com/rajkosto/TegraRcmSmash
The readme file was super helpful to me.
Turn off the switch. No go RCM Mode. After that connect to USB C. You should now hear that Windows Device connected sound from Windows.
Now follow that:
PS: Did also the "thinfoil Thing" and it worked perfectly
I tried it first with a shitty usb-c cable and it did not work.
After I tried a better quality one it worked.
@Sora Takihawa
Put your Switch with usb-c to Windows. start Zadig go to options and "List All Deviced". Does it show up? as APX (only in RCM Mode) or as "Switch" in charging Mode?
After I tried a better quality one it worked.
@Sora Takihawa
Put your Switch with usb-c to Windows. start Zadig go to options and "List All Deviced". Does it show up? as APX (only in RCM Mode) or as "Switch" in charging Mode?
Have you installed the correct drivers for the APX device? It have to show up as APX.
After that drag the payload.bin into the TegraSmash Icon/exe and the menu should show up on your switch.
After that drag the payload.bin into the TegraSmash Icon/exe and the menu should show up on your switch.
Even if you want a nand dump... to open up the "menu" on your switch - even for dumping. You HAVE to inject the payload over TegraSmash...
Or your screen just stay black.
https://github.com/Jan4V/hekate-ipl-50x/releases/tag/v1.0.0 just use this Payload.
Then you will get a Menu like this:
You can "Launch firmware" or what you want "Tools" and Backup Nand etc.
ps: you navigate in this menu with "VOLUME + & VOLUME -" for up and down, and press Enter with "ON/OFF Button"
Or your screen just stay black.
https://github.com/Jan4V/hekate-ipl-50x/releases/tag/v1.0.0 just use this Payload.
Then you will get a Menu like this:
You can "Launch firmware" or what you want "Tools" and Backup Nand etc.
ps: you navigate in this menu with "VOLUME + & VOLUME -" for up and down, and press Enter with "ON/OFF Button"
Last edited by Frexxos,
For further Instructions with "NAND Dump etc" go to: https://gbatemp.net/threads/rcm-payload-hekate-mod-raw-full-nand-backup.502604/
And there are plenty of Youtube Tutorials.
And there are plenty of Youtube Tutorials.
Yo, sorry for posting on an old thread. But i have the issue where it doesnt show for zadig but works on tegrasmash. Im trying to be able to use goldtree with gold leaf but it doesnt seem to show up. Am i supposed to reverse the process and change the driver?
D
Deleted User
Guest
Similar threads
