ROM Hack RELEASE Xenoblade Chronicles 2 Graphics Settings

[Zeorginas]

Here's a 'fix' for the flashing element symbol which completely disables the symbol from appearing. This needs to be placed like libnx.ini in a DLC folder, and required that DLC to work.

Holy thanks dude

 

[zmw0510]

Thank you very much for your work.
Because I am using the Japanese version (0100F3400332C000) and the latest version is v2.0.2.

Will Xenoblade2DynFPS support Japanese version (0100F3400332C000) v2.0.2 be developed in the future?

Update:I found something that works, thank you anyway.

 

[Unknownwhisp]

(Emulator)
So i have been looking for something completely different to everyone here and it is to run the game decently at a good fps.
Ryujinx wasn't so bad with the FPS and is more consistent but has a lot of softlocks and yuzu had a lot of hiccups (stuttering a lot moving around and under 20 FPS).
i tried almost everything this thread has to offer and the only thing that improved the game significantly for me was disabling " reactive flushing " which in all honestly i have no idea what it does, i heard it leads to a lot of glitches but it did make my game on yuzu go from 20 and under fps to jumping 20-40 fps with no stuttering and no slowing down.
so i am wondering if there's a way to get the game in yuzu to a decent FPS without making the game glitchy/look weird or at least if there's a way to bypass ryujinx's softlock when you open the main menu.

 

[LiciousK]

So i have been trying many different setup's here with ryujinx, yuzu/sudachi tried vulkan opengl, deleting shaders, basically I'm stumped i cant figure out why all three games has this reflection effect really distracting in XB2's water & XB3's trees in the background, This picture was taken with no mods no patches nor dlc added for reference and i played around with the lib_nx.ini file like 2x res/ no bloom / 2x bloom / dynamic res off & on etc nothing fixed it.... So guess the question is it on my end or is this literally how its supposed to look running on emulators? actually just curious if there's a fix I already beat them on the switch was just looking for a consistent "HD" trilogy replay. Thanks.

 

[tet666]

So i have been trying many different setup's here with ryujinx, yuzu/sudachi tried vulkan opengl, deleting shaders, basically I'm stumped i cant figure out why all three games has this reflection effect really distracting in XB2's water & XB3's trees in the background, This picture was taken with no mods no patches nor dlc added for reference and i played around with the lib_nx.ini file like 2x res/ no bloom / 2x bloom / dynamic res off & on etc nothing fixed it.... So guess the question is it on my end or is this literally how its supposed to look running on emulators? actually just curious if there's a fix I already beat them on the switch was just looking for a consistent "HD" trilogy replay. Thanks.
View attachment 444070

Doesn't look like this for me does it only happen at a specific time? I tried at day and night and i couldn't reproduce it are you on Nvidia or AMD? Maybe ask on the Ryujinx Discord or make a bug report on the github page of the game.

 

[LiciousK]

ya i'm pretty sure it's something on my end at this point thank you. i'll just play replay it normally.

 

[rsc-pl]

Any way to apply it to original Japanese release (not the western one)?

 

[tet666]

Any way to apply it to original Japanese release (not the western one)?

I don't think there is a difference in these configuration files between regions so yeah it should work just fine.

 

[vubble]

Anyone else having broken quick time events with the dynamic fps mod? Ive also tried the 60 fps mod and I run into the same issues there as well.

 

[iameatingjam]

I know this has been gone over before, but I'm sorry I'm still confused. I have a 60 fps mod that I'm happy with.

All I want is AA removed. I remember doing it in the first game relatively easily, this game seems to have the same vaseline AA but 1) I can't remember how I fixed it in DE in the first place and 2) the file structure in this game seems different anyway.

I'm on version 2.1 with Torna installed. Is this possible? I have tried to find the answer before and always either find bits and pieces but not enough to understand or get lead down a rabbit hole of broken links and confusion.

I have a hex editor if that helps ( and no idea how to use it).

 

[sn17z]

I cant seem to get this mod to work on the switch hardware itself, i cant find any mods that actually fix the game because its blurry.

Does anyone have any advice?

 

[emcintosh]

I cant seem to get this mod to work on the switch hardware itself, i cant find any mods that actually fix the game because its blurry.

Does anyone have any advice?

IIRC you can set the resolution to a static 720p. You can’t go any higher on a real Switch. Have you already done this?

 

[Superslash13]

For Yuzu to have good sharp resolution all you have to do is:
- set 2x scale in emulator
- download theboy181 mod from here (bottom page): yuzu-emu.org/entry/yuzu-art

then put in the mod to user/load/01100e95004938000

you can see the folder right clicking on the game in yuzu then "show mod folder". also you can see if mod is installed clicking on game property (its going ot be checked after DLC).

replaying this game on my PC and it looks very very good (4k'ish) with this mod. Everything is supersharp and resolution is 4k.

Hey any chance you have whatever that mod was still? The site is completely dead now, would really appreciate it if you could share it someway

 

[ShinKazumi]

does it run on 60fps?

 

[the_otsutsuki]

which files are meant to be put in contents ?

like docked mode or raw image ?

 

[E-Major]

ya i'm pretty sure it's something on my end at this point thank you. i'll just play replay it normally.

Hello.
Were you able to find a solution to this. Because I am having the exact same issue and this is the only Info I can find on it.
My information:
Ryujinx 1.1.1401
Xenoblade Chronicles 2.1.0 with all DLC installed.
I am using the DynsFPS mod and the ini.
I tried without any mods and it is the same.
Strangely I just finished Xenoblade Chronicles DE with the same setup and it doesn't have this problem.

 

[E-Major]

Hey any chance you have whatever that mod was still? The site is completely dead now, would really appreciate it if you could share it someway

You can find theboy181's mods on github.
Just google theboy181.
Soz I can't share a link as I am new.

Post automatically merged: Oct 9, 2024

does it run on 60fps?

Not by default it is locked to 30fps.
But if you use the Dynamic 60fps mod you can.
I can't share links yet so just look for masagrator Xenoblade2DynFPS
he was also active in this thread earlier.

 

[extherian]

Here's a 'fix' for the flashing element symbol which completely disables the symbol from appearing. This needs to be placed like libnx.ini in a DLC folder, and required that DLC to work.

Hello, how do I get this mod to work? I placed it in the "Mods" folders of Xenoblade 2 in both Yuzu and Ryujinx, and I can go into properties and see that it is enabled, but it doesn't do anything. Does it only work on the standalone version of Torna: The Golden Country? If so, could you please made a version that works with the DLC version of Torna built into Xenoblade 2?

 

[E-Major]

Hello, how do I get this mod to work? I placed it in the "Mods" folders of Xenoblade 2 in both Yuzu and Ryujinx, and I can go into properties and see that it is enabled, but it doesn't do anything. Does it only work on the standalone version of Torna: The Golden Country? If so, could you please made a version that works with the DLC version of Torna built into Xenoblade 2?

You don't place a mod like that in the mod folder you place it in the folder for one of the DLC's.
This means you have to have the DLC installed.
If it is installed then the DLC mod folder will be in the same place as the main games.
Just go up one level.
The main game mod folder should be: 0100E95004038000
Place this in a folder like: 0100E95004039001 (This is the folder for Torna the Golden Country)
Here is an example from Yuzu.

Post automatically merged: Oct 9, 2024

@masagrator
Firstly thank you for all of the work that you have put into the modding of this game and 1 and 3 as well.
I do have a problem with one of your mods though.
I have been using the Xenoblade2DynFPS 50 fps mod from your github repository.
On Yuzu I get smooth 60fps. On Ryujinx 50-60 fps.
It works really well with one exception.
The QTE's for Blade Specials seem to be running at half speed.
I get this on both emulators.
I have looked everywhere and cannot seem to find a solution.
I tried other 60fps fixes and they all have the same problem.
I would like to check if you were ever able to solve the issue?

My Specs are:
AMD Ryzen 9 5900X, 32GB DDR5 RAM, RTX3080TI Graphics.
Yuzu EA 4176
Ryujinx 1.1.1401

Any help would be appreciated.

 

[extherian]

I see, I found the folder you mentioned but adding the mod had no effect. I guess maybe I need to enable it in a menu somewhere but it doesn't show up under "Properties" for "Xenoblade 2". I don't have the standalone version of Torna installed but rather the one added on to the main game as DLC. Disappointing that I still can't get it to work.