Hacking Wii U CFW: broken SD reader

  • Thread starter Thread starter AppaStyle
  • Start date Start date
  • Views Views 2,505
  • Replies Replies 4

AppaStyle

New Member
Newbie
Joined
Oct 27, 2022
Messages
1
Reaction score
0
Trophies
0
Age
31
XP
58
Country
United States
Hello. My brother has purchased a Wii U with a broken sd reader. Are there any options to move forward? It seems that there is no hack from USB, is that correct?

How realistic is replacing the reader?
 
Hello. My brother has purchased a Wii U with a broken sd reader. Are there any options to move forward? It seems that there is no hack from USB, is that correct?

How realistic is replacing the reader?
Look into the slot with a bright light to see if there is any corrosion and/or bent pins. You might get lucky and be able to bent something back and/or remove corrosion.

For the case that the reader is beyond repair: It might be a standard SD slot – should be possible to obtain one of these without harvesting a fully dead Wii U motherboard.

As can be seen on a photo (ifixit.com, Wii U teardown), the slot is soldered on – unlike the N3DS(XL) and the O3DS which have the SD reader plugged into a connector. Desoldering of so many points isn't easy (even more since everything is lead free with higher melting point nowadays).
Be careful and patient. Do not pull on the slot while desoldering. It will most likely rip off solder pads!
gqSDvioKMCE2DKCr.huge

Good luck!
 
Im aware this is an old post, but I also had a broken wii u sd card reader and wanted to replace it, and after looking far and wide for the exact component, I was able to find the exact part from JLCPC. The MFR Part # is "SCDABA0800" and it's from the manufacturer "ALPSALPINE". Here is the link https://jlcpcb.com/partdetail/ALPSALPINE-SCDABA0800/C370960. Hope this helps someone at some point!
Post automatically merged:

Actually if you want to purchase you would have to go to lcsc https://www.lcsc.com/product-detail...eQlZZVFVUR1lbXzsOAxUeFF5JWBYZEEoKFBINSQcJGk4=
 
Last edited by MikeP1,

Site & Scene News

Popular threads in this forum