Gaming Wii Fit Plus problem

[bnm81002]

I downloaded Wii Fit Plus and burned it onto a disc using ImgBurn but it doesn't load up in my Wii, it's the NTSC-U version and my Wii is NTSC-U on 3.2U firmware, how do I solve this black screen problem? it does load up through the Configurable USB Loader and the USB Loader GX,

 

[borka]

Well, what do you use to load the disk?

I've got a PAL (!) Wii with cIOS 14, old NeoGamma R6, and the burned disk runs Ok for me. So, in your case this should be a bad burn or a config problem, I think.

 

[bnm81002]

Well, what do you use to load the disk?

I've got a PAL (!) Wii with cIOS 14, old NeoGamma R6, and the burned disk runs Ok for me. So, in your case this should be a bad burn or a config problem, I think.

NTSC-U Wii with cIOS 14 running 3.2U with Wiikey at 1.9s, it runs fine using Configurable and GX USB Loaders, also it runs fine using Gecko OS 1.9.2, so it's not a bad ISO image

 

[KiiWii]

gecko os 1.9.2 fixes all

 

[erolz]

Hi,

i am using an old version of the USB loader (i think its 1.5_cfg)
I'm running system menu 4.0U and cIOS v14 and Hermes' IOS222/223 with an external Seagate HD.

When I load Wii Fit Plus from the USB HD, the Wii throws the following error:

Error #001,
unauthorized device has been detected.

Will this game work with a new version of the loader?
I have tried to use a new version (replaced the dol file) but then the loader wont recognize my USB HD

here's my usb-loader/config:

device = usb
background = ultimate.png
wbackground = ultimate_wide.png
layout = ultimate3
buttons = options_B
covers = 1
hide_footer = 1
colors = mono
widescreen = 0
music = 0
covers_path = sd:/usb-loader/covers
device = usb
cover_style = standard
covers_size = 160, 225
gui = 1
gui_transition = scroll
confirm_start= 0
ios = 223-mload
contry_patch = 1
fix_002 = 1
block_ios_reload = 1
alt_dol = 0


Any suggestions?

 

[1st Time]

I have a different problem with Wii Fit Plus. I have a Pal Wii on 4.1 with the latest cios revision installed, however whenever I try to load the game from the dvd using gecko os 1.9.2 when the game goes to load I get a black screen saying that the game disc cannot be read and to check the manual.

I have not changed the region of the disc from NTSC to Pal - as normally gecko has no problem with this.

If I try any other method I recieve 001 errors. My wii has an original wiinja version 1 modchip installed, but I recently had to perform a softmod to get games to load properly via the disc channel.

Is anyone else having this problem?

Any help would be appreciated

Thanks

EDIT UPDATE: I repatched the iso from NTSC to Pal using regionfrii and it works perfectly using Gecko OS 1.9.2 (it even brought across all the games I unlocked in the first wii fit despite this version being US).

 

[Laughlyn]

Using USB Loader GX.

when i was playing the wii fit plus games i went onto the golf swing/driving range. halfway through my balance board dc'd and when i went back to system menu i got the system menu files are corrupt.

luckily i managed to solve it by -/+ to get into maintenance and re-installed 4.1 updater which seemed to work. now sure if its a fault on that peticular event or not but just thought i'd point it out

 

[mwl78]

whn i first tried the game on usb loader gx set 002 error and game worked was well pleased .. come to play again later all i get is a blank screen , Also tried loading from coverfloader and i get a green screen on that , managed to get it to work on neogammer r6 . Any ideas why it wont work on th other two loaders help would be apreciated ..

my system 3.2e(dowgraded from 4.0) cios rev 14

Would just like to say this is a great site . this forum has helped a complete novice like me softmod my wii so cheers guys

 

[djtaz]

Im had a friend who had the same issue with the standard dvd gamma loader so they installed wiiflow , installed the disc to the harddrive and ran it from there and it worked perfectly - for anyone who has a harddrive and is having disc issues with this game - though im sure most will try that anyway.