- Thread starter TheRealMrBuushy
- Start date
- Views 22,790
- Replies 182
I used both FTP and SFTP serperatly now. It still says "Could not connect to server"
Are you using a dns? On wifi you ethernet for both pc and switch? It sounds like there is some extra hopping going on through your traffic
DNS to stop connecting to switch servers? Cause if so then no, I nulled the emunand with Incognito. I use ethernet for the pc and WiFi for the switch
hmmm, maybe the wifi signal is a little to slow to establish a connection before it times out? Could you try using an ethernet cable with your switch if you can please?
Are both on same subnet like 192.168.xx.yyy with the x's on IP address same on both Switch and PC?
With ethernet I get 200 download and 20 upload, even though I'm on WiFi, I'm about 10 ft away from the router. I don't have a usb/type-c to ethernet anyone in my house or near me
If he's using his local IP and not external then yeah, as all modems have a set number of IP's through the subnet.
This is the info we do not know, as the IP's were painted over in the pics. Thus asking.
Even if you are right next to the modem/router it can still be to slow to authenticate, You don't have to block out your internal IP on the switch or filezilla. Could you post your internal IP not external ex 192.xxxxx or 10.xxxxx or PM me it if you are scared to post it please.
That would be FTPD pro, I am using classic. As originally said, I used both......
That's okay, they should be different from device to device. Have you tried a differnt ftp on switch?
Okay, wifi and wired are handled as two separate subnets by router. Easiest way forward would be using wired or wifi for both.
I'm very new to the aspect of networking and such so I don't know what can be done which such information but as far as I have heard, not much can be done with internal IP so my switch internal IP is 192.168.68.115 and my pc internal IP is 192.168.0.34
@TheRealMrBuushy ftp is slow regaurdless maybe try DBI? https://github.com/rashevskyv/dbi/releases just plug the switch into your pc with a cable and start DBI and go to the last option. Much faster and no internet required.
--------------------- MERGED ---------------------------
EDIT1: You can also use nxmtp
--------------------- MERGED ---------------------------
With you internal IP's only people on your network can access them either through a VPN or being on your network directly.
EDIT1: You can also use nxmtp
Last edited by laramie,
, Reason: Options
You could try following command on the PC's command prompt (Admin mode):
route add 192.168.68.0 MASK 255.255.0.0 192.168.0.1
He could but if he uses dynamic IP's that might bork another device. Unless he uses static IP's
Similar threads
- No one is chatting at the moment.
-
-
-
@
Veho:
Once again I fell down the martial arts rabbit hole and am plumbing the murky depths of the internet's various martial arts and fighting crafts echo chambers. -
@
Veho:
I like to get up to speed on that every now and then, see what the newest high wisdom everyone is spouting nowadays.
-
@
Veho:
If you're not actively involved and only get up to speed every few years or so, you can see the tide of public opinion flapping worse than my dong while I'm skipping naked down a hallway.
-
-
-
-
@
Veho:
Like most forced updates, this one has terrible support and was very poorly received by the userbase.
-
-
-
-
-
-
@
FAST6191:
How do you know the giant wasn't on walkabout https://c8.alamy.com/comp/ADKT2C/ce...carving-in-dorset-uk-thought-to-be-ADKT2C.jpg -
@
Veho:
That's what I said, maybe they were just doing a recreation of the Cerne Abbas giant but didn't finish it in time.
-
-
-
-
-
-
-
@
Psionic Roshambo:
https://imgur.com/gallery/ZfBfPgk 100 million... Can think of better uses but OK lol -
-
