1. TerribleTy27

    OP TerribleTy27 GBAtemp Regular
    Member

    Joined:
    Dec 22, 2017
    Messages:
    285
    Country:
    United States
    Just curious. Put in your bootloader, exploit, cfw, and anything else you think is relevant. If possible, explain the reasons why you have said setup.
     
  2. Freezerbomb

    Freezerbomb Likes tacos
    Member

    Joined:
    Aug 17, 2018
    Messages:
    172
    Country:
    United States
    Internal Trinket M0 mod with Hekate 4.2.
    AutoRCM enabled.
    Hekate autoboots SXOS 2.2.

    This is the best possible setup IMO.

    Pros:
    • No jig or dongle needed.
    • Easily boot OFW through Hekate (saves fuses)
    • Fully powers off with Hekate payload
    Cons:
    • Perfection leaves no room for improvement
     
    Emenaria and olku like this.
  3. olku

    olku Advanced Member
    Newcomer

    Joined:
    Oct 31, 2015
    Messages:
    72
    Country:
    Estonia
    Freezerbomb likes this.
  4. Aldoria

    Aldoria GBAtemp Fan
    Member

    Joined:
    May 1, 2018
    Messages:
    398
    Country:
    France
    SX OS 2.2 with 128GB SD Card
    AutoRCM
    Using my computer or phone to turn on the Switch
    FW 6.0.0
     
  5. maxx488

    maxx488 GBAtemp Regular
    Member

    Joined:
    Jun 15, 2018
    Messages:
    214
    Country:
    Argentina
    Tegra x1 1.0ghz 4gb ram 720p lcd screen 32gb hdd running horizon 6.1 sxos 2.2 patch and sx gear
     
    XaneTenshi and Aldoria like this.
  6. scroeffie

    scroeffie GBAtemp Fan
    Member

    Joined:
    Aug 1, 2017
    Messages:
    301
    Country:
    Netherlands
    sx os 2.2 2tb external
     
  7. slaphappygamer

    slaphappygamer GBAPerm
    Member

    Joined:
    Nov 30, 2008
    Messages:
    2,572
    Country:
    United States
    Naked switch with, 200gb microsd, and sx pro. My switch is 5.10, or was it 5.0.1.
     
    Last edited by slaphappygamer, Oct 30, 2018
  8. lordelan

    lordelan GBAtemp Psycho!
    Member

    Joined:
    Jan 4, 2015
    Messages:
    4,470
    Country:
    Germany
    6.0.1 Switch + 400 GB mSD FAT32
    SX Pro dongle which autoboots hekate 4.2 (from SDfiles) which autoboots Atmosphère with sigpatches and stuff.
    Shiekah homescreen theme
    hbmenu and RetroArch are installed as NSP
    n1dus + NSPsplit script for new games
     
  9. wolfidroid

    wolfidroid Advanced Member
    Newcomer

    Joined:
    Jul 4, 2018
    Messages:
    62
    Country:
    Israel
    Sxos 2.0.1, horizon 6.0.0, sx gear.
     
  10. aerios169

    aerios169 GBAtemp Advanced Fan
    Member

    Joined:
    Dec 30, 2012
    Messages:
    605
    Country:
    Mexico
    SX so emunand, 6.0.1 and SD with 200gb
     
  11. XaneTenshi

    XaneTenshi GBAtemp Fan
    Member

    Joined:
    Nov 24, 2013
    Messages:
    440
    Country:
    Denmark
    I am pretty much running the same setup as maxx488...

    Tegra x1 1.0ghz 4gb ram 720P lcd screen and a 32gb hdd running horizon 5.1. I also have an extra set of Joycon Controllers and a Charging Station as well as this fine looking dock that I can put my Switch in to play games on my TV...It really is a nice setup:rofl2:


    On a more serious note:

    I am running 2 different Nands, one Clean and one Hacked. Both currently sitting at FW 5.1. Using 2 different SD Cards awell.

    1 64Gb exfat formatted SD Card for main use. Runs ReiNX 1.7 through Hekate 4.2.
    1 16GB FAT formatted SD Card for use with RetoArch. Also has ReiNX 1.7, but primarily runs Atmosphere 0.7

    Both are booted through TegraRCMGui through Laptop/Desktop (whatever currently suits my needs).
     
    maxx488 likes this.
  12. Emenaria

    Emenaria GBAtemp Regular
    Member

    Joined:
    Nov 6, 2015
    Messages:
    245
    Country:
    Japan
    Sorry for a noob question but how do you make Hekate autoboot SX OS or other external payloads?
     
  13. WiiuGold

    WiiuGold GBAtemp Advanced Fan
    Member

    Joined:
    Jan 5, 2015
    Messages:
    893
    Country:
    United States
    Sx os 2.2.1, 6.1.0 firmware with a 8TB HDD and 400gb sdcard .
     
  14. Freezerbomb

    Freezerbomb Likes tacos
    Member

    Joined:
    Aug 17, 2018
    Messages:
    172
    Country:
    United States
    You can launch payloads by adding "payload=bootloader/payloads/payload.bin" to your hekate_ipl.ini file.

    Here's what mine looks like:

     
    Emenaria likes this.
  15. Emenaria

    Emenaria GBAtemp Regular
    Member

    Joined:
    Nov 6, 2015
    Messages:
    245
    Country:
    Japan
    Thanks!
     
  16. caHarkness

    caHarkness Newbie
    Newcomer

    Joined:
    Nov 1, 2018
    Messages:
    7
    Country:
    United States
    Finally joined GBATemp because I've been lurking long enough and this post was inviting, so here's my setup...

    • BOOT0/BOOT1/NAND (backup of my Switch in airplane mode with no wireless networks—before any hacking)
    • CTCaer Hekate bootloader
    • AutoRCM enabled
    • Memloader payload (slightly more convenient than taking the SD card out)
    • Atmosphere 0.7.3
    • EasyPower (faster than holding the power button)
    • EdiZon (best save manager in my opinion)
    • RetroArch

    Now for the good stuff:

    Obviously, AutoRCM can be a pain in the ass if you power down (be it intentionally or kernel panic), so I am turning a Raspberry Pi Zero W (the model with wireless capabilities) into your not-so-average-payload-injector. Since the Pi Zero supports being powered over both USB ports, I'm able to then use software to take care of the rest—all over a single USB cable (no power banks or being tethered anywhere).

    That software is this: (gitlab's website)/relatived/rpi-nx-rcm

    In summary, it just pushes your payload.bin in the vFAT partition (/boot, readable by most OSes) as soon as it is able to detect that a Switch in RCM mode is plugged in. This is a very nice alternative to the commercial products available, and it's a tier above all the other injectors in luxury because it's live-programmable (as opposed to flashing an Arduino).

    ...but it doesn't stop there.

    I also run hostapd on it to create a wireless access point for the Switch. I actually store this on another SD card because I need the USB port for something else. The way I have Raspbian configured is to accept wireless connections and bridge them to the USB Ethernet device that my Pi Zero emulates. I do this because I want to FTP into my Switch so I can make testing my own software go a little bit faster. I have full control over the Switch's Internet access, kind of like a walled garden — such as those you'd find in hotels. I can easily serve up DNS and reject attempts that the Switch makes to phone home, and can conditionally enable/disable outside services. It's also useful for viewing the packets being sent to-and-fro, possibly opening the door for 443 SSL/TLS blocking and live data spoofing, all from a cheap "$5.00" computer.

    If other RCM payload injectors aren't doing this, they're losing! So yeah, that's my setup. I haven't went online AT ALL since hacking, no changes in fuse burning, so hopefully that NAND dump I made is all I need to make this all just a bad dream.

    Edit:
    I also pledge to never pirate a single Switch game until all of it becomes abandonware.
     
    Last edited by caHarkness, Nov 1, 2018
  17. ptn_9x

    ptn_9x Newbie
    Newcomer

    Joined:
    Nov 2, 2018
    Messages:
    2
    Country:
    Vietnam
    Excuse me, but how can I install Hekate on SXOS exactly? Sorry, I'm new in this, so can you help me step by step, please :(:(
     
  18. masagrator

    masagrator The developper
    Member

    Joined:
    Oct 14, 2018
    Messages:
    2,543
    Country:
    Poland
    You need to download SX Loader. So it's not possible to autoboot to SX OS if you have SX Pro dongle.
     
  19. GuyInDogSuit

    GuyInDogSuit Your friendly neighborhood guy in a dog suit.
    Member

    Joined:
    Aug 1, 2008
    Messages:
    1,754
    Country:
    United States
    SX Pro and SX OS 2.2.1 with Samsung 128GB SD Card
    AutoRCM enabled
    Firmware v6.0.1
     
  20. Kafluke

    Kafluke GBAtemp Guru
    Member

    Joined:
    May 6, 2006
    Messages:
    5,424
    Country:
    United States
    I just ordered a Trinket M0 based on this post. Do you have good guide I can follow?
     
    Last edited by Kafluke, Nov 3, 2018
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - Whats, Setup,