Hacking Question what cable can I use?

  • Thread starter Thread starter jimmyj
  • Start date Start date
  • Views Views 4,444
  • Replies Replies 24

jimmyj

Official founder of altariaism. Copyright jimmyj
Member
Joined
May 26, 2017
Messages
1,485
Reaction score
1,097
Trophies
1
Location
Hyrule
XP
1,653
Country
United Kingdom
so my friend said he wanted his pro controller cable back and so right now I don't have a way to access rcm payloads,can anyone post a link of what cables should be fine for rcm ? As I don't really want to shell out 50£ for a pro controller just for the cable.
Thanks :)
 
Apparently, any USB type-C cable is good to go, but also be wary of a missing resistor on really old or cheap third party cables?
 
A bull resistor?
Isn't the resistor standard and supposedly coming in any USB-C cable, and the contrary just the rare exception?
By "bull" I'm assuming he meant "bullshit" haha.

Any standard USB-C cable should be fine.

I think most of the confusion comes from trying to send payloads from a device that doesn't support sending them, rather than the cable being at fault.
 
Be aware that you don't use your cheap cable to (high)power you Switch. It can brick your Switch, melt the cable and of course it gives your Switch less power.
 
Last edited by The_Green_Nerd,
Be aware that you don't use your cheap cable to (high)power you Switch. It can brick your Wii, melt the cable and of course it gives your Switch less power.
Erm... then a cheap cable... melts the Switch turning it into a bricked Wii, that has less power?
Did I get it right? /s
 
It was the 56k ohm resistor that was originally believed to be the cause of Switches bricking due to third party docks. It was debunked though, had something to do with Switch being designed not to follow traditional USB manufacturing or something like that.
 
I think if you are going to use to strictly to transfer data, any generic cable will do the job.
But if you are going to charge your Switch with the cable, then it's another story.
 
I think if you are going to use to strictly to transfer data, any generic cable will do the job.
But if you are going to charge your Switch with the cable, then it's another story.
Ahhhhh THAT explains it clearly. Thank you! The problem was charging cables vs data cables. Ok, got it, thank you!
 
It was the 56k ohm resistor that was originally believed to be the cause of Switches bricking due to third party docks. It was debunked though, had something to do with Switch being designed not to follow traditional USB manufacturing or something like that.

Link to a good cable then?
 
It was the 56k ohm resistor that was originally believed to be the cause of Switches bricking due to third party docks. It was debunked though, had something to do with Switch being designed not to follow traditional USB manufacturing or something like that.
No, the cable recommendation is from Nintendo it self which goes with how they designed the Switch...

The dock bricking has nothing to do with the cable as most use the original Nintendo charger with them so its something with the dock (what some engineers claimed is there is probably voltage drops pushing the Switch a lot more or some crap like that, so voltage spikes)...

About Nintendo not following USB-C Specs, NO ONE DOES, there's a lot more devices out there using USB-C 15V too like laptops. Almost no manufacturer ever follow the USB specs so that's why you have brand X quick charge, brand Y quick charge (most are incompatible with other brands QC technologies) and quite a lot more amps going trough them than it was ever designed, specially USB 2.0 smartphones which was mostly common up to 0.5A and we see 2.1A and higher...

ps: But for data only and connected to like a PC USB2.0 0.5A port any USB-C cable will probably always work fine, now to charge at 15V or just high amps even at 5V, I would only use a certified USB-C cable my self (doesn't mean it has to be the expensive ones but rather certified).
 
Last edited by guily6669,
  • Like
Reactions: jimmyj
No, the cable recommendation is from Nintendo it self which goes with how they designed the Switch...

The dock bricking has nothing to do with the cable as most use the original Nintendo charger with them so its something with the dock (what some engineers claimed is there is probably voltage drops pushing the Switch a lot more or some crap like that, so voltage spikes)...

About Nintendo not following USB-C Specs, NO ONE DOES, there's a lot more devices out there using USB-C 15V too like laptops. Almost no manufacturer ever follow the USB specs so that's why you have brand X quick charge, brand Y quick charge (most are incompatible with other brands QC technologies) and quite a lot more amps going trough them than it was ever designed, specially USB 2.0 smartphones which was mostly common up to 0.5A and we see 2.1A and higher...

ps: But for data only and connected to like a PC USB2.0 0.5A port any USB-C cable will probably always work fine, now to charge at 15V or just high amps even at 5V, I would only use a certified USB-C cable my self (doesn't mean it has to be the expensive ones but rather certified).
I don't trust myself, link to good one ? :P
 

Site & Scene News

Popular threads in this forum