Toggle sidebar

Tutorial  Updated

Using "smashhax" with Linux

If you can use the browser, I suggest that you use the new browserhax (up to 11.0.0-33!) in the meantime.

Try out Ubuntu 15.04: http://old-releases.ubuntu.com/releases/15.04/

This requires a New 3DS. The demo version doesn't work and is patched. If you have 1.1.3 or newer delete/disable the update data.
officially called smashbroshax sometimes smashax
Here is a new tool I call smashbroshax-helper. It is a graphical interface for the exploit which simplifies most of the process of broadcasting the packet. It requires almost no setup outside of creating a bootable Linux USB/DVD.

Important notes:
  • This does not work on Fedora or Red Hat-based distributions because aircrack-ng needs to be compiled on it (and I can't figure out how to install the needed things).
  • Don't use a virtual machine!
  • This probably will never work on Old 3DS.
Download smashbroshax-helper beta

It is recommended that you use a live Ubuntu 15.04 image. Versions 15.10+ have issues. http://old-releases.ubuntu.com/releases/15.04/
  1. Create a bootable USB/DVD with a Linux distribution (there are various guides online).
  2. If possible, get a second USB/SD card/storage device, download and save the above .zip to it.
    • Don't extract the contents of it to the USB device, as it might cause problems. Just save the .zip file to it.
    • If you can't do this, you'll have to connect to the Internet while in Linux to download it.
    • If using a bootable USB, make sure you can use two ports at a time. Don't take out the Linux USB while it is being used!
  3. Restart your computer and run the bootable USB/DVD you created.
  4. Extract the contents of the .zip to the Desktop.
  5. Open the smashbroshax-helper folder and double click "smashbroshax.sh".
  6. Follow the on-screen prompts.
  7. If everything goes well, you should now have homebrew!
Video demonstration, from boot to shutdown:

from https://gbatemp.net/threads/tutorial-using-smashhax-with-linux.397194/page-9#post-5842512

If you would like the full tutorial, involving terminal usage and compiling:
To reverse the changes to your wireless interface and remove issues connecting to networks after, rebooting your system or changing it to "Managed" instead of "monitor" should fix it. How to do that is in the second to last section.


@Cydget made a script that condenses most of this into a script. I have not tried it myself yet but it seems to work for others.
Cydget said:
So, I made a little script for this. If anybody wants it, then unzip this file and read the readme. And yes, I like to pipe things. http://www.mediafire.com/download/oulnubnzkk9g3i0/smashhaxEZ.zip
Click to expand...
Requirements
  • Any Linux distribution should do (this has only been tested with Debian-based distributions). Windows and OS X users should wait or find a method for now, sorry!
    • Please do not use Linux in a virtual machine, it likely won't give direct access to your wireless card. Dual boot or use a live USB/disk.
    • The recommended distro to use is Ubuntu 15.04 (link to Ubuntu MATE 15.04).
  • A Wi-Fi-capable wireless card.
  • Super Smash Bros. for Nintendo 3DS Full or Demo.
  • New 3DS. This does not work on Old 3DS.
  • Patience. The hax is sort-of unreliable so your game will most likely crash a few times.
  • Recommended: Another device to access the internet (phone, tablet, computer, console).
Preparing
  • Install these packages using your package manager. For example, "apt-get" for Debian-based distributions (including Ubuntu).
    Code: 
    openssl libssl-dev libnl-genl-3-200 libnl-genl-3-dev libnl-3-200 libnl-3-dev pkg-config
  • Find your wireless card's interface by opening a terminal and using the command "ip link". It would be something like wlan0 or wlp3s0.
    Code: 
    ian@ian-VPCEG34FX:~/Desktop/aircrack-ng-1.2-rc2/src$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
    link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
3: wlan0: <NO-CARRIER,BROADCAST,ALLMULTI,PROMISC,NOTRAILERS,UP,LOWER_UP> mtu 1500 qdisc mq state DORMANT mode DORMANT group default qlen 1000
    link/ieee802.11/radiotap xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
  • You probably already have it, but get the homebrew starter kit and place it on your SD card.
  • Download the smashhax .pcap files from the releases section of the smashbroshax repository.
  • Determine the .pcap file to use. This should be straightforward using the file names.
    The built beacon-hax pcaps are located under "pcap_out/". In the filenames, "vXYZ" means game-version "vX.Y.Z". Full-game filenames for USA include "gameusa", while the other regions filenames include "gameother".
    Click to expand...
  • Get the "Otherapp payload" from the Homebrew Launcher site and save it to "smashpayload.bin" at the root of your SD card.
  • Download and extract aircrack-ng's latest release source.
  • Save aireplay-ng.patch from the smashbroshax repository in the folder "aircrack-ng-1.2-rc2".
Compiling aircrack-ng/aireplay-ng
  • Open a terminal and go to the "aircrack-ng-1.2-rc2" folder.
  • Use the command "patch src/aireplay-ng.c < aireplay-ng.patch". If you get the following then it has succeeded.
    Code: 
    patching file src/aireplay-ng.c
Hunk #1 succeeded at 560 (offset 1 line).
Hunk #2 succeeded at 573 (offset 1 line).
  • Run "make" and wait. The program should be compiled with the patch now. If you get the following as the last line then it has succeeded.
    Code: 
    make[1]: Leaving directory '/path/to/aircrack-ng-1.2-rc2/src'
The moment of truth
  • Run these 3 terminal commands in order, using the wireless interface (from "ip link") you found earlier.
    sudo ifconfig wireless_interface down
    sudo iwconfig wireless_interface mode monitor
    sudo ifconfig wireless_interface up
    sudo iwconfig wireless_interface channel 6​
    (the last line was suggested by @difool. and might make the payload trigger faster)
  • Enter the "src" folder in your terminal.
  • Run the following command to start broadcasting the packet: "sudo ./aireplay-ng --interactive -r /path/to/smashbros_version_beaconhax.pcap -h 59:ee:3f:2a:37:e0 -x 10 wireless_interface"
    Use the .pcap file and wireless interface you found out earlier.
  • On the 3DS system, start the game, then choose Smash and Group. Wait for the magic to happen.
Encountering errors? Something confusing?
  • Does running aireplay-ng end with "End of file"? You might be running your installed version of aircrack-ng. Don't forget the ./ for "sudo ./aireplay-ng ..."!
  • Please tell me the distribution you are using and the error you've encountered. This will help me fix your issue faster.
  • If you don't get something, don't hesitate to point it out! I want to help anyone I can.
  • Did you spot an inaccuracy or mistake I made? It would be great if you can tell me that too.
  • This was before the Otherapp payload selector was added to the HBL site. This is kept here for legacy reasons or something.
    • Determine what file you need to get from the Homebrew Launcher Payload section:
      With the release builds, the hax loads the payload from SD "/smashpayload.bin". This should contain the hb-launcher(https://smealum.github.io/3ds/) otherapp payload. Until there's a proper otherapp payload selector on the hb-launcher site, the payload can be downloaded from the following URL(see also https://github.com/smealum/sploit_installer):
      FIRMVER values(without quotes):
      • "POST5" = non-New3DS
      • "N3DS" = New3DS
      REGION values(without quotes):
      • "U" = USA
      • "E" = EUR
      • "J" = JPN
      MENUVER values(without quotes):
      • "11272": Non-JPN, system-version v9.0.
      • "12288": System-version v9.2.
      • "13330": System-version v9.3.
      • "14336": System-version v9.4.
      • "15360": System-version v9.5.
      • "16404": System-version v9.6.
      • "17415": System-version v9.7.
      • "20480_usa": USA, system-versions v9.9-v10.0.
      • "19456": Non-USA, system-versions v9.8-v10.0.
      MSETVER values(without quotes):
      • "8203": System-versions below v9.6.
      • "9221": System-versions starting with v9.6.
      For example, the payload URL for New3DS USA 9.9.0-X - 10.0.0-X is:https://smealum.github.io/ninjhax2/Pvl9iD2Im5/otherapp/N3DS_U_20480_usa_9221.bin
      The end result is a file named "smashpayload.bin" at the root of your SD card.

You are allowed to reproduce/reprint this tutorial, as long as a link back to this page (https://gbatemp.net/threads/tutorial-using-smashhax-with-linux.397194/) is included.
 
Last edited by ihaveahax,
  • Like
Reactions: xDevlinx21, Deleted User, Deleted member 373057 and 16 others
Click to expand...
I meant using the 1.1.2 pcap with the 1.1.0 version of your game. Hope this will work. :)
 
I have the japanese digital version of the game and it's 1.0.1. There is only one update file to get from the eShop and it's the 1.1.5 one.
On the SDcard the update files are for 1.1.5 only, so it includes the other updates. You can't rename one file/folder to disable one part and get it to 1.1.2 sadly, as it's all-in-one.
 
Last edited by ,
I've been getting this same kinda error using each wireless interface

"ioctl(SIOCSIWMODE) failed: Operation not supported

ARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211,
ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead. Make
sure RFMON is enabled: run 'airmon-ng start wlan0 <#>'
Sysfs injection support was not found either."

How do i fix this?
 
Just came back to the thread, just to ask something, the fact that my wireless adapter is wlp2s0 instead of wlan0 can have something to do with the fact that this thing isn't working for me. Just ocurred to me today, after X days. Because my friend is out of the country, and my chances of doing OoThax are pretty slim now.
 
I have the 1.1.0 EU Cartidge and the pcap doesn't work. Can someone fix it for this version, please?
 
Ysle29 said:
Do you have the right payload and the starter kit on the root of your sd card?
Click to expand...

I have everything right. The Starter Kit, the 10.7 payload renamed to smashpayload.bin, and nothing.

Crashes to menu, and restarts the 3ds
 
Ysle29 said:
I was replying to Rhan's post lol.
Anyway, I have the same issue as you so I bet you also have version 1.1.0?
Click to expand...

Lol, np bro.

No I'm on 1.0.4. I think I'll try to buy OoT and powersave...I just didn't want to spend money on the powersaves that is something I'll not be using unless to do this.
 
Does this error mean my wireless interface (wlan0: USB and internal for my laptop) is doesn't support monitor mode?
Code: 
ioctl(SIOCSIWMODE) failed: Invalid argument

ARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211,
ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead.  Make
sure RFMON is enabled: run 'airmon-ng start wlan0 <#>'
Sysfs injection support was not found either.
 
Last edited by JustAKirby,
So I got as far as SMASH -> Group. When the bottom screen goes red or yellow, I know it's not working and try again. However, in one instance I got a white bottom screen. Using the smashpayload.bin that was recommended here on my SD root, and the homebrew starter kit copied there as well. Why would I get a white screen at the bottom?
 
futurama said:
ok, i did it. i found that needed 1.0.1 jp pcap file here: https://mega.nz/#!LhwhSYRa!FeLXrnvBXgDw6BR7MBNytQ_DN3H-gbMmkYDxQo1d5Fw ,
renamed it into 1.0.0 and replaced the original "other 1.0.0" file from the linux loader from page one. homebrew is finally working on my jp new3ds (10.7) but i can't downgrade to 9.2.
i tried several sysupdater to downgrade but after pressing (y) i am getting this message: hax init...
and my system freezes. it's frustrating :-(
Click to expand...

Hey, I've tried the way described above (I'm 10.7 and this is the only way I know how), but whenever I deliver the packets, the N3DS top screen goes white and black lines (at first it crashed), then it goes back to the 3DS home screen and restarts. I'm running 10.7.0-32E with an eshop 1.0.1 EU version of smash bros.

Anyone got any idea how to fix it?
 
JustAKirby said:
Does this error mean my wireless interface (wlan0: USB and internal for my laptop) is doesn't support monitor mode?
Code: 
ioctl(SIOCSIWMODE) failed: Invalid argument

ARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211,
ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead.  Make
sure RFMON is enabled: run 'airmon-ng start wlan0 <#>'
Sysfs injection support was not found either.
Click to expand...
Yes. Late to the party, but your card and dongle are not supported. Atheros cards are recommended for use with the Air suite.
 
  • Like
Reactions: ihaveahax

Site & Scene News

Go to forum More news

Popular threads in this forum

Why did the price of 3ds shoot up ?

Hacking Homebrew Project  BlazerTube - a YouTube 3DS revival using the REAL app!

[WIP] SMW 3DS Port - Early Playable Demo by ZalgonEn

Problems getting Homebrew to appear outside of the Homebrew Launcher (homebrew won't appear on the HOME menu)

Homebrew app Emulator  [Release] 3DS-CLI - Run a real RISC-V Linux environment on the Nintendo 3DS

Website for finding alternative games for 3DS

Homebrew  [Progress update] LCE Minecraft 3ds

Gaming  any good rpgs on 3ds?