thank u。 successfully installed ,but same issue (when playing “the kirby”)with Trackmania using the latest usbloader gxTry the installer at bottom of this post.
thank u。 successfully installed ,but same issue (when playing “the kirby”)with Trackmania using the latest usbloader gxTry the installer at bottom of this post.
Excite Truck isn't playable from an SD card, although that might change in the future.thank u。 successfully installed ,but same issue (when playing “the kirby”)with Trackmania using the latest usbloader gx
If you unplug any USB storage devices then it'll ask you if you want to enable SD card mode when you start the loader, but you can also go into the loaders hard drive settings and enable or disable the setting from in there.where is the seeting ,open the sd card made?i didnt find it?i use 1281 dol,i find everywhere in setting?nothing !
yes , when it boot and press A to enalbe sd card made,but in setting i cant edit custom paths,If you unplug any USB storage devices then it'll ask you if you want to enable SD card mode when you start the loader, but you can also go into the loaders hard drive settings and enable or disable the setting from in there.
If your SD card has more than 1 partition then you'll receive errors like this...but in setting i cant edit custom paths
It'll be the third option within the hard drive settings menu. Although the option might be missing if you've got more than 1 partition on your SD card, so you'd need to set sdmode=0 in meta.xml instead.in setting what the page i can find the sd card setting?gui setting,loader settings,hard drive settings,features!
thinks a lot,i just ues some divers tool see the sd card ,the card had some problom!i will try another one!If your SD card has more than 1 partition then you'll receive errors like this...
https://gbatemp.net/posts/10044968
So the current solution is to make 1 big FAT32 partition. Otherwise you'd need to wait until I release my next update, which has improved FAT32 partition seeking for the SD card mode.
It'll be the third option within the hard drive settings menu. Although the option might be missing if you've got more than 1 partition on your SD card, so you'd need to set sdmode=0 in meta.xml instead.
It doesn't, but if you add the fakemote module to the d2x cIOS then you can use some PS3/PS4 controllers.Hi, I have a question:
Does Loader GX support HID controllers for navigating the app? (like nintendont with gamecube games).
It would be really great to be able to control the loader gx menu with the generic controller, instead of the wiimote
The issue likely comes down to the loader/IOS not fully supporting your USB flash drive, since no changes were made between 1280 and 1281 that'd change the behaviour of USB devices.My Sandisk usb drive is FAT32 formatted and I updated to the lates cIOS too (d2x-v11-beta1).
--bootios=58
to --bootios=249
in the meta.xml file. And you'll also need to remove the two lines to enable arguments, assuming they're still present.Thanks for the quick reply, I never had this issue with previous versions of usb loader gx and this drive.The issue likely comes down to the loader/IOS not fully supporting your USB flash drive, since no changes were made between 1280 and 1281 that'd change the behaviour of USB devices.
You could try to change the--bootios=58
to--bootios=249
in the meta.xml file. And you'll also need to remove the two lines to enable arguments, assuming they're still present.
USB Flashdrives (-stick, -pens) are worst option to use because of incompatibility. Even if you set up two Wii`s the exact same way, a USB Flashdrivestick might work on the one Wii, but not on the other.My Sandisk usb drive is FAT32 formatted and I updated to the lates cIOS too (d2x-v11-beta1).
You'll experience this issue with all homebrew that supports classic controllers, since it's handled by the libogc library.I've noticed small bug related to generic classic controllers (don't have true one to check) - when disconnecting CC, Wiimote stops responding. Only solution is to connect another one and exit to Wii Menu.
Same problem is in WiiSXRX and Not64, so good solution could be applied to more apps.
do you have the TAB MOD version?You'll experience this issue with all homebrew that supports classic controllers, since it's handled by the libogc library.
I believe their stance on this subject is that you should purchase a genuine controller if you want things to work correctly, since it's hard for them to support all of the generic controllers and work around their issues.
It's not something that I release, but you should find a link for an updated version if you go back 4-5 pages.do you have the TAB MOD version?
thank you for your workIt's not something that I release, but you should find a link for an updated version if you go back 4-5 pages.
I won't ever officially add tabs, since I don't like how cluttered it makes the user interface. But I will eventually release an update that makes it easier to quickly switch between Wii, GameCube, NAND and EmuNAND games.
I've been using USB flashdrives successfully without a single failure for nearly a decade. They are a GREAT option, use less power, and have no moving parts. And I have three Wii's. The same USB sticks work on all three. And it isn't just me. Many of us do. So don't claim they are the "worst option to use because of incompatibility." They are the best option for the reasons I stated and the fact that many of us have never had a single incompatibility in a decade of using them.USB Flashdrives (-stick, -pens) are worst option to use because of incompatibility. Even if you set up two Wii`s the exact same way, a USB Flashdrivestick might work on the one Wii, but not on the other.
d2x-v10-beta52 and d2x-v11-beta1 have the same USB Modul, so drive recognizen is the same.
You might try the different cIOS as Loader IOS inside USB Loader GX:
- 249(base56)
- 250(base57)
- 58 or 251(base58), (set 251 for game cIOS)