Hacking Update loader from 4.2a to 4.3

[cyber011]

I hope some body can help me out with this problem.
I have red the problem posts from the other topics.>>but it will not solved my problem.

My problem>I wanted to upgrade my loader (G6 Flash English) from version 4.2a to 4.3 but without any luck.
All what I got was : a number 7 on the left middle and number 1 in the Yes bos:

Tried Fat format 16 and then the MP utility from G6 to do the Low Format>>
-Put just two files g6loader.sys and g6verify.sys (English version) in the root folder.
-Start up my NDS lite while holding the select button / or just Y in the G6 flash menu to enter the GBA mode>
, when I got the green message >Press Start+Select+A+B>>>
It will prompted a windows >reload the System?
Yes / No
Select Y>>a number 7 on the left middle and number 1 in the Yes bos


Also tried FAT32>
FAT32>MP to low format>>no results.

Tried total 6 times...

Emailed to the G6, but still no reply from them.

Thanks in advance.

Cheers,

 

[delta123]

there was another topic on this. but what you need to do is format your G6 in FAT/FAT16 and then try it.

*Edit*
here is the topic
http://gbatemp.net/index.php?showtopic=36031

 

[cyber011]

Thanks, but already tried it out but still no luck..

 

[outphase]

Did you try the MP Utility?

 

[cyber011]

Yes, I have tried the MP.
Also tried to update different firmware: 4.1f 4.2b..nothing work.

 

[ds6220]

are you unzipping them into the root dir of the card or are you dragging and dropping the 2 files to the root? Often when you unzip something to a directory it will create a folder for the files and if it were to do that then the G6 would not find the files when it was to access them and give you that innocuous error. Just make sure the 2 files are in the root directory. you should see them ass soon as you open that drive (for me it ends up being E: )

 

[cyber011]

Edit: At last I have found the solution:
I have format Fat 16 and the use the MP utility to do the low format again>
Than copied only the two files to the root>>>>>yes exactly just like the handlings I did above except this time I use my Desktop PC instead of my Laptop ( ??)

But I can now upgrade to 4.3...

Still thanks for all your replies>>>

Tips: try other PC!!!!!