Hacking Update Game - I Dont understand

[RandoSterling]

Wii U 5.3.2
Using Loadiine GX2
Blocked DNS to not allow Wii U to communicate with Nintendo

I have a legit copy of Super Smash Bros Wii U, and I want to update it.
I tried using NUS grabber GUI and couldn't get it to show any games.
I recently tried Uwizard but got this message which I dont understand.

A ticket is required to decrypt the contents, but a ticket for this title is not available on Nintendo's server. Would you like to select a ticket file to use? The ticket in a Wii U game disc for the same game from NUS is found in "system\02\title.tik".

Most video tutorials I found only update games that are on an SD Card, and not from a Game Disc.

Sorry If this has been posted before.

 

[aspire78]

I have also Smash disc, just use NUS Graber GUI, update your server liste, download latest update
that will craate folder with updates files,

you copy all files to your SD card into folder "install"

and you run wupinstaller twice and you wait 40-50 minutes at least

 

[RandoSterling]

How do I update the Server List?

This is all I see when I open the program

 

[Kafluke]

I have tried to use WUPInstaller over and over again without success. I have downloaded all the files from new-nusgrabbergui (latest on MarioKart 8). I then put all the files into sdcard\install. I'm spoofed to 5.5.1 so I know the installer works. When I launch wupinstaller it takes me to the menu with the "close software" button. If I hit home or back or anything I immediately get a black screen with "error 0x0000000...". I've let it sit on that screen for over 2 hours. The data management screen always tells me that there is corrupt data to delete but I never see any data for Mario Kart 8.

 

[aspire78]

I have tried to use WUPInstaller over and over again without success. I have downloaded all the files from new-nusgrabbergui (latest on MarioKart 8). I then put all the files into sdcard\install. I'm spoofed to 5.5.1 so I know the installer works. When I launch wupinstaller it takes me to the menu with the "close software" button. If I hit home or back or anything I immediately get a black screen with "error 0x0000000...". I've let it sit on that screen for over 2 hours. The data management screen always tells me that there is corrupt data to delete but I never see any data for Mario Kart 8.

do you run twice wup ? or you run kexploint and then wup ?

--------------------- MERGED ---------------------------

How do I update the Server List?

This is all I see when I open the program

https://gbatemp.net/threads/download-the-new-nusgrabbergui.411228/

 

[fiveighteen]

Don't use NUS Grabber GUI 1.7. It's dead and outdated. Use "U_Tility" by Tesa or "New NUSGrabberGUI" by FoxMcoud5655

 

[aspire78]

How do I update the Server List?

This is all I see when I open the program

Download this https://gbatemp.net/threads/download-the-new-nusgrabbergui.411228/

and like my screenshots

after downloading, put the content of 00xxx folder to you SDcard: install folder

 

[Kafluke]

do you run twice wup ? or you run kexploint and then wup ?

--------------------- MERGED ---------------------------




https://gbatemp.net/threads/download-the-new-nusgrabbergui.411228/

Yes I run the kernel exploit first. And I'm using new nusgrabbergui

Sorry OP I didn't mean to hijack your thread. I'll just read how you get through it and try to figure it out on my own

 

[RandoSterling]

after downloading, put the content of 00xxx folder to you SDcard: install folder

So I downloaded like you said and I followed some of the steps in the link you provided.
The file I got was 00xxx and inside there was no "content" folder as some video told me there would be. Do I need to decrypt it or leave it as is.

Do I just place the files like the steps said:
So, if your SD Card was mounted as the F: drive, then one example of the files should look like this: (F:\install\00000001.app)

F:\install\00xxx\ or just straight f:\install\

 

[Kafluke]

So I downloaded like you said and I followed some of the steps in the link you provided.
The file I got was 00xxx and inside there was no "content" folder as some video told me there would be. Do I need to decrypt it or leave it as is.

Do I just place the files like the steps said:
So, if your SD Card was mounted as the F: drive, then one example of the files should look like this: (F:\install\00000001.app)

F:\install\00xxx\ or just straight f:\install\

No subfolders inside of \install. Just drop all the files in there.

 

[RandoSterling]

I gotta be honest, I don't really notice a difference if there was an update or not.
Is there a way to get all the DLC?

Question: Do you need to keep those update files on the SD Card or can I just delete them now?

 

[Kafluke]

I gotta be honest, I don't really notice a difference if there was an update or not.
Is there a way to get all the DLC?

Question: Do you need to keep those update files on the SD Card or can I just delete them now?

If the update is successful you'll see the game update in the data management screen under settings and no you don't need them on the SD after a successful update

 

[fraret]

IIs there a way to get all the DLC?

At the moment, you can only use NNU patch to acces the e-Shop and pay for them.

 

[Kafluke]

Okay got it working. Here's the steps I used on my 5.4 spoofed to 5.5.1

1. Download latest update using new-nusgrabbergui
2. Move downloaded files to sdcard\install
3. Ran kernel exploit through locally hosted HTTP
4. Used this build of WUP Installer http://gbatemp.net/threads/wup-inst...fing-5-3-2-5-4-0.397053/page-123#post-6080452 thanks @skalienx!
5. After launching WUPINstaller I hit the home button. Instant Freeze!
6. Let sit for about an hour (500MB install)
7. Hard reset. The data is there!

 

[aspire78]

Okay got it working. Here's the steps I used on my 5.4 spoofed to 5.5.1

1. Download latest update using new-nusgrabbergui
2. Move downloaded files to sdcard\install
3. Ran kernel exploit through locally hosted HTTP
4. Used this build of WUP Installer http://gbatemp.net/threads/wup-inst...fing-5-3-2-5-4-0.397053/page-123#post-6080452
5. After launching WUPINstaller I hit the home button. Instant Freeze!
6. Let sit for about an hour (500MB install)
7. Hard reset. The data is there!

3 = Run Wup Installe twice, don't run Kernel Exploit

What type of SD do you have ?

I spend un update for 2 GB with 1h and it was ok

 

[Kafluke]

3 = Run Wup Installe twice, don't run Kernel Exploit

What type of SD do you have ?

I spend un update for 2 GB with 1h and it was ok

I don't run WUP installer twice because the built in exploit never works for me. I just run the standalone non loadiine kernel first which works 9 out of 10 times for me.

I don't know how long 500 MB's takes to install so I just let it sit forever since nothing was working before that. I may have only needed a few minutes. I don't know

 

[Maximilious]

I have tried to use WUPInstaller over and over again without success. I have downloaded all the files from new-nusgrabbergui (latest on MarioKart 8). I then put all the files into sdcard\install. I'm spoofed to 5.5.1 so I know the installer works. When I launch wupinstaller it takes me to the menu with the "close software" button.

You need to launch Internet Browser a second time and launch WUPInstaller again a second time. One time is not enough. After the second time, you hit home button and let your console sit. Make sure it's not set up for auto-shutoff after two hours as the latest smash update takes roughly 3 hours to install through WUP installer. A good rule of thumb is it will install 250MB every 15 minutes, so 1 hour per 1GB.

 

[Kafluke]

You need to launch Internet Browser a second time and launch WUPInstaller again a second time. One time is not enough. After the second time, you hit home button and let your console sit. Make sure it's not set up for auto-shutoff after two hours as the latest smash update takes roughly 3 hours to install through WUP installer. A good rule of thumb is it will install 250MB every 15 minutes, so 1 hour per 1GB.

You don't HAVE to run the WUP Installer twice. You just need to run it twice if you haven't already loaded the kexploit. You can use the original kexploit and then launch WUP Installer just once and it will load. Launching WUP installer first only checks to see if the kernel has been exploited. If it already has then it moves on and loads up WUP Installer. If it hasn't been exploited yet it first tries to run the race attack. If that fails then you have to keep trying over and over again until you end up at the home screen. I prefer to use the other kexploit first because it works 9 out of 10 times for me but with WUP Installer I have to launch it 6 or 7 times before it actually successfully expoits and starts up.

 

[Maximilious]

You don't HAVE to run the WUP Installer twice.

I see, I've been launching kexploit and then WUP installer twice after that! I haven't had the issue you mention though. Have you tried grabbing the update files via regular NUSgrabber CLI and not the NewGUI version? Could be something @FoxMcloud5655 needs to look into for that update.

 

[Kafluke]

I see, I've been launching kexploit and then WUP installer twice after that! I haven't had the issue you mention though. Have you tried grabbing the update files via regular NUSgrabber CLI and not the NewGUI version? Could be something @FoxMcloud5655 needs to look into for that update.

I'm not having any issues. I got it working. https://gbatemp.net/threads/update-game-i-dont-understand.415104/#post-6081338