Hacking Question Trinket M0 Support ( Needed )

[taxco]

wait a second...

edit.: so download the repository. open the main.ino with arduino. in the tab hekate_ctcaer_3.0.h delete everything and insert following (that is the sx Os payload)
https://gist.github.com/noemu/2881b006500af92ba5b08eae8c591477

oke got that, how do i optain the code for sx os, i need to use the phyton script right?

--------------------- MERGED ---------------------------

thx btway

 

[Hodorian]

oke got that, how do i optain the code for sx os, i need to use the phyton script right?

--------------------- MERGED ---------------------------

thx btway

the link from my post is the code for SX OS. You only need to program your trinket now.

 

[taxco]

the link from my post is the code for SX OS. You only need to program your trinket now.

Aha thank alot, i will give it a try and let you know. i just need to ind a USB c to USB.

one more thing, i need to tab the rst line twice. is this the pin 4 or the rst ( need to solder a wire and than tap to the groudn?)

 

[olku]

Aha thank alot, i will give it a try and let you know. i just need to ind a USB c to USB.

one more thing, i need to tab the rst line twice. is this the pin 4 or the rst ( need to solder a wire and than tap to the groudn?)

Yes, to ground. It's RST.
You don't need to solder, you can just use wire to touch rst pad twice, while other end is on gnd point (usb-c port metal shielding for example)

 

[tecfreak]

one more thing, i need to tab the rst line twice. is this the pin 4 or the rst ( need to solder a wire and than tap to the groudn?)

No, it is the reset switch of the trinket which you have to tap twice so that the trinket starts in bootloader mode to be able to flash it over the arduino ide.

 

[taxco]

oke thanks to all, iam waiting to get the usb c to usb cable. Today i hop soo.

 

[Drakia]

Here a bit better pciture, i removed some off the glue, How can i test the RST Cap with the multymeter?

--------------------- MERGED ---------------------------


I think is should be right? he says "Pin 4 - to cap on M92T36 as pictured "
But correct me please if iam wrong

Based on your picture, you seem to have missed a pretty important part of the guide:

> Be very careful with the point on the capacitor, and be very careful not to bridge it with the adjacent capacitor.

You've bridged the hell out of those capacitors.

 

[taxco]

the link from my post is the code for SX OS. You only need to program your trinket now.

Got the USB C cable, flashed as you tol me and all is working now.
No more constant LED light, reboot works, RCM works.
All of you thanks alot.

 

[tecfreak]

But you might take a look at this cap like @Drakia mentioned before which u may possibly have shorted.

 

[taxco]

But you might take a look at this cap like @Drakia mentioned before which u may possibly have shorted.

Yes ist seems it is, damd. Is there any easier pint to solder? can i use the other side of the cap? thx