Hacking [Tools] AmiiBomb

[Drud1995]

Yeah a guide would be nice. Today the new tags came but I can still not creat tags. I am starting to believe my device is defective or I am doing something wrong.

I posted it a few days ago under the Switch hacking and homebrew section. Check it out: https://gbatemp.net/threads/how-to-write-amiibo-files-to-nfc-tags-using-arduino-ide.475923/

 

[DjoeN]

Works perfect, just tested created tags from your tool on a Switch. Thanks a lot.

Small suggestions for a future update:
The majority of the new dumps are going to be with the newly discovered extra data at the end of the file which makes it 572 bytes, but the currently know writing method is for 540 byte files.
Basically to trim 572 dumps down to 540.

The ones that I tested were like this and I trimmed them down myself. Honestly, it's not really something important since it can easily and quickly be done on the computer. Just if you feel like it.

@Ac_K

Are you ging to build in support for this in a next update for AmiiBomb?

Thanks

 

[urherenow]

Yeah, maybe not, but that's really not what's being discussed here. If you have a jailbroken phone you can possibly write tags with it now.


Sent from my iPhone using Tapatalk

is there a tutorial? The NFC writer app is obviously not programmed to take amiibo_keys.bin and do anything with it...

 

[DjoeN]

is there a tutorial? The NFC writer app is obviously not programmed to take amiibo_keys.bin and do anything with it...

You have to rename amiibo_keys.bin to key_retail.bin and it should work, place it in the same folder where AmiiBomb.exe is or a subfolder called Keys
Start AmiiBomb.exe and select "Options" -> "Keys" -> "Select Amiibo Key File" and browse to where it is located

 

[GraFfiX420]

is there a tutorial? The NFC writer app is obviously not programmed to take amiibo_keys.bin and do anything with it...

You have to rename amiibo_keys.bin to key_retail.bin and it should work, place it in the same folder where AmiiBomb.exe is

I bought the app last night, I think as it stands it may only be viable for cloning? Although, I'm not sure how it will handle locking the ntag.

I don't see a way to use amiibo_keys, but I'll try a clone in a bit.

 

[DjoeN]

I bought the app last night, I think as it stands it may only be viable for cloning? Although, I'm not sure how it will handle locking the ntag.

I don't see a way to use amiibo_keys, but I'll try a clone in a bit.

Bought what app? AmiiBomb is free as far as i know. You need to buy the hardware
About the keys, i've editted my previous post on how to use them in AmiiBomb

 

[GraFfiX420]

Bought what app? AmiiBomb is free as far as i know. You need to buy the hardware
About the keys, i've editted my previous post on how to use them in AmiiBomb

Yeah we are talking about the nfcwriter app for iPhone, I've been cloning amiibos with my Arduino and Android for quite some time now.


Sent from my iPhone using Tapatalk

 

[DjoeN]

Yeah we are talking about the nfcwriter app for iPhone, I've been cloning amiibos with my Arduino and Android for quite some time now.


Sent from my iPhone using Tapatalk

ah, ok, didn't know there was one for iPhone to

 

[xnegx]

I'm sorry for my bad English,

I bought this kit that was indicated in the first pages, https://www.aliexpress.com/item/Ade...32748789758.html?spm=2114.13010608.0.0.DhFhq3

And I'm using the 0.3 alpha version of AmiiBomb, but I'm getting the following error at the time of writing the card ...

Error: Your Tag It's probably not the NTAG215!

And the app closes itself.
My windows is the 10

Thank you

 

[nitrostemp]

what tag are you using, cause you cant use the tags included

 

[xnegx]

what tag are you using, cause you cant use the tags included

That's it then, Because I'm testing with the card that came in the kit, because my NTAG have not arrived yet. Thank you very much

 

[hereticorp]

EDITED: The original post is now under a spoiler tag because I finally found the processor chip for my Uno R3. It works perfectly for the Uno, just not for the Mega.

Spoiler

Ok, so I have an Arduino Mega 2560 and an RFID-RC522. I've wired them together as specified in this image:

Using the equivalent pins 9-13, 3.3v power and GND.

Wiring Pics

Spoiler

Then I load up AmiiBomb and open up the Amiibombuino Flasher and get this once I've flashed:

Which should mean everything is all good, but when I go to flash an Amiibo...

No matter if I use one of the NTAG215 stickers, the card that came with the board, or the keyfob that came with the board, or even a spare Lego Dimensions tag I have laying around, I get no response from the board.

I've checked all connections, the power light on the RC522 is lit, and everything should be working. But it's not.

Any help would be greatly appreciated.

 

[Galebourn]

Hey,
I know next to nothing about Arduino chips and while I saw a few links to bundles in this thread, I'd like to keep the price affordable.
Can someone please tell me if this tutorial would work with the following components?

https://de.aliexpress.com/item/high...O-USB-CABLE/32680845470.html?isOrigTitle=true

https://de.aliexpress.com/item/Free...te-Read-for/32672212005.html?isOrigTitle=true

https://de.aliexpress.com/item/Free...wire-Dupont/32241677710.html?isOrigTitle=true

https://de.aliexpress.com/item/10pc...le-RFID-Tag/32742203141.html?isOrigTitle=true

 

[LoDeus]

Hey,
I know next to nothing about Arduino chips and while I saw a few links to bundles in this thread, I'd like to keep the price affordable.
Can someone please tell me if this tutorial would work with the following components?

https://de.aliexpress.com/item/high...O-USB-CABLE/32680845470.html?isOrigTitle=true

https://de.aliexpress.com/item/Free...te-Read-for/32672212005.html?isOrigTitle=true

https://de.aliexpress.com/item/Free...wire-Dupont/32241677710.html?isOrigTitle=true

https://de.aliexpress.com/item/10pc...le-RFID-Tag/32742203141.html?isOrigTitle=true

You need NTAG215, these won't work

 

[Galebourn]

You need NTAG215, these won't work

Okay, noted. Everything else is fine?

 

[Dexter]

Everything else is OK.
UNO R3 like this (microUSB) will also works: https://www.aliexpress.com/item/1pc...-for-Arduino-UNO-Rev-3-0-hei/32689124737.html

Spoiler: R3 microUSB

 

[xnegx]

That's it then, Because I'm testing with the card that came in the kit, because my NTAG have not arrived yet. Thank you very much

Arrived some tags already recorded with amiibos for me to test. But when I go in dump amiibo ... it is only in the screen of "awaited ntag" ... Does anyone know what is going wrong?

 

[Deleted User]

I need help, by any chance is there a video I could watch? My problem is that I tried selecting my super smash bros link bin but it keeps saying wrong amiibo keys file/

 

[Deleted User]

Grab info of an Amiibo Dump via http://Amiibo.life website.

I have no idea what this means. How do you find info on an amiibo dump with amiibolife because all that website says is the name of the character, a picture, and if you want to add it to a wish list.

 

[Jokkovitch]

Keys file has nothing to do with amiibo dumps, find the correct ones on Google or use amiibomb helps