TegraRCMGUI wont detect my switch

[Tempabrap]

Im almost positive my switch is in RCM mode as last i used it, it was in autoRCM, but no matter what ive tried Tegra isnt detecting it, im not sure what to do at the moment so any advice or tips are extremely appreciated.

 

[Takokeshi]

Have you tried a different cable and/or different usb port? Ensured the proper driver is still in place?

 

[Tempabrap]

Have you tried a different cable and/or different usb port? Ensured the proper driver is still in place?

I have ;; ive tried both of those things, multiple times in fact

 

[omgcat]

I have ;; ive tried both of those things, multiple times in fact

try a different pc? or the rcm android app?

 

[Tempabrap]

try a different pc? or the rcm android app?

rcm android app?
and i only have one pc

 

[Takokeshi]

Is it possible the battery could have run dry? If you've been leaving it unused and unplugged for a long time, that's more than likely, in which case you might need to leave it on charge for a while before it's able to properly boot up.

Otherwise, I have nothing :/ if all else fails then the connector itself might be borked.

 

[Tempabrap]

Is it possible the battery could have run dry? If you've been leaving it unused and unplugged for a long time, that's more than likely, in which case you might need to leave it on charge for a while before it's able to properly boot up.

Otherwise, I have nothing :/ if all else fails then the connector itself might be borked.

thats absolutely a possibility, but if thats the case how long would you leave it charging for?

 

[impeeza]

the problem is what in RCM mode the batter doesn't charge well, so let it connected to original charger for 30 minutes and try again.

there is a thread about completely discharged switch already here on gbatemp.

 

[kidkat210]

https://github.com/MenosGrante/Rekado

 

[Ellaquin]

(Deleted) IDK Why it posted 3 times

 

[Ellaquin]

(Deleted) IDK Why it posted 3 times

 

[Ellaquin]

have you tried using a new cable, or running Zadig again, just to check the drivers

 

[Tempabrap]

have you tried using a new cable, or running Zadig again, just to check the drivers

i have, that didnt make a difference

 

[Tempabrap]

the problem is what in RCM mode the batter doesn't charge well, so let it connected to original charger for 30 minutes and try again.

there is a thread about completely discharged switch already here on gbatemp.

ive charged it for over an hour

 

[Ellaquin]

i have, that didnt make a difference

also, just to check, have you held down Volume Up as well, and then hit power

 

[Tempabrap]

also, just to check, have you held down Volume Up as well, and then hit power

yes i have

 

[randy_w]

Can you at least hear a new device connected sound when you plug it in? Also check device manager and see if you can find that libusb device (if you installed driver before) or anything new at all.