Homebrew SysCheck v2.0 - Released

[PPSainity]

SysCheck v2.0 - Released

MetaFile

Homebrew application which does several checks on installed IOS and custom IOS:
- IOS Stub;
- Fake signature (aka Trucha Bug);
- ES_DiVerify (aka ES_Identify);
- Flash Access;
- NAND Access;
- Boot2 Access;
- USB 2.0.

sysCheck generates a report on the root of the SD card (sd:/sysCheck.csv).

The author can not be held responsible for any damage sysCheck might cause!

------------------
Changelog

Version 2.0
* Added a very nice GUI
* Improved report text (no Enabled/Disabled anymore)
* Added BC and MIOS check
* Report can be displayed without SD
* Fixed some bugs
* Easy to translate (language file in source)

Download Link

-[]D

 

[FIX94]

Yeah! That's absolutely fantastic! The GUI is even better than I ever expected!

 

[PPSainity]

Yeah, the new GUI is great. Something nice to look at while it does the checks. I like the new report format too, the extra white space is easier on the eyes.

Here's a sample report:

Spoiler

sysCheck v2.0 by Double_A
...runs on IOS58 (rev 6175).

Region: NTSC-U
System Menu 4.3 (v513)
Hollywood v0x11
Console ID: ########
Boot2 v4

Found 97 titles.
Found 39 IOS on this console. 8 of them are stub.

IOS4 (rev 65280): Stub
IOS9 (rev 1034): Trucha Bug, ES Identify, NAND Access
IOS10 (rev 768): Stub
IOS11 (rev 256): Stub
IOS12 (rev 525): Trucha Bug, ES Identify, NAND Access
IOS13 (rev 1031): Trucha Bug, ES Identify, NAND Access
IOS14 (rev 1031): Trucha Bug, ES Identify, NAND Access
IOS15 (rev 1031): Trucha Bug, ES Identify, NAND Access
IOS16 (rev 257): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS17 (rev 1031): Trucha Bug, ES Identify, NAND Access
IOS20 (rev 256): Stub
IOS21 (rev 1038): Trucha Bug, ES Identify, NAND Access
IOS22 (rev 1293): Trucha Bug, ES Identify, NAND Access
IOS28 (rev 1806): Trucha Bug, ES Identify, NAND Access
IOS30 (rev 2816): Stub
IOS31 (rev 3607): Trucha Bug, ES Identify, NAND Access
IOS33 (rev 3607): Trucha Bug, ES Identify, NAND Access
IOS34 (rev 3607): Trucha Bug, ES Identify, NAND Access
IOS35 (rev 3607): Trucha Bug, ES Identify, NAND Access
IOS36 (rev 3607): Trucha Bug, ES Identify, NAND Access
IOS37 (rev 5662): Trucha Bug
IOS38 (rev 4123): Trucha Bug, ES Identify, NAND Access
IOS50 (rev 5120): Stub
IOS51 (rev 4864): Stub
IOS53 (rev 5662): Trucha Bug
IOS55 (rev 5406): Trucha Bug
IOS56 (rev 5661): Trucha Bug
IOS57 (rev 5918): Trucha Bug
IOS58 (rev 6175): No Patches
IOS60 (rev 6400): Stub
IOS61 (rev 5661): No Patches
IOS70 (rev 6687): Trucha Bug
IOS80 (rev 6943): Trucha Bug
IOS202 (rev 4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS222 (rev 65535): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS223 (rev 65535): Trucha Bug, NAND Access, USB 2.0
IOS224 (rev 65535): Trucha Bug, NAND Access, USB 2.0
IOS249 (rev 20): Trucha Bug, NAND Access, USB 2.0
IOS250 (rev 65535): Trucha Bug, ES Identify, NAND Access
BC v6
MIOS v10

Report generated on 2010/08/22.

-[]D

 

[FIX94]

... I tried it out now, and also the bootmii IOS bug is fixed!

 

[OriginalHamster]

I have problems with this release, when it's searching for IOS vulneralities, the green progress bar always got stuck at the center =/

 

[PPSainity]

I have problems with this release, when it's searching for IOS vulneralities, the green progress bar always got stuck at the center =/

It's hanging when testing out a specific IOS then. Do you have any unique IOS installed other than the normal cIOS, or vanilla IOS that are commonly used? Does it create a report at all with partial info in it?

-[]D

 

[DarkMatterCore]

Has anyone got the link to the source? I wanna check that language file.

 

[PPSainity]

Has anyone got the link to the source? I wanna check that language file.

It's WiiBrew hasn't been updated yet, but here's Double_A's (the coder) official post with a link to the source code. Seems like he is German???
-[]D

 

[DarkMatterCore]

Has anyone got the link to the source? I wanna check that language file.

It's WiiBrew hasn't been updated yet, but here's Double_A's (the coder) official post with a link to the source code. Seems like he is German???
-[]D

But that's the source code from the version 1.6.3, :/.

 

[techboy]

Hm, just tried it.

Works fine, but apparently the "ALL" option hates some IOSes. I had to delete my IOS5 to keep it from freezing during the test.

For some reason, it had no issues if I tested my IOS5 by itself. The report it produced was accurate too.

 

[PPSainity]

Has anyone got the link to the source? I wanna check that language file.

It's WiiBrew hasn't been updated yet, but here's Double_A's (the coder) official post with a link to the source code. Seems like he is German???
-[]D

But that's the source code from the version 1.6.3, :/.

lol, how did I miss that....

-[]D

 

[Madridi]

Hm, just tried it.

Works fine, but apparently the "ALL" option hates some IOSes. I had to delete my IOS5 to keep it from freezing during the test.

For some reason, it had no issues if I tested my IOS5 by itself. The report it produced was accurate too.

Isnt IOS5 the one from an unknown source?
iirc, I tested it a while back and it had a bad signiture (brfgfreee!! or something)
Maybe it doesnt scan anything with a watermark?

(I checked signitures and stuff for all IOS a few days ago, and this IOS did have a problem, I just cant seem to remember if that problem was a signiture issue or not)
I'll test it again if you want..

 

[dlf]

I tried it and it got along way, almost to the 200's but froze with 202 I think. Yet I think I have "v2" of it installed, what would get it to get all the way through?

 

[OriginalHamster]

I have problems with this release, when it's searching for IOS vulneralities, the green progress bar always got stuck at the center =/

It's hanging when testing out a specific IOS then. Do you have any unique IOS installed other than the normal cIOS, or vanilla IOS that are commonly used? Does it create a report at all with partial info in it?

-[]D

Just cIOS249 and cIOS202, all my other IOS are Nintendo's official (4.2 version), and IOS58.

 

[PPSainity]

I tried it and it got along way, almost to the 200's but froze with 202 I think. Yet I think I have "v2" of it installed, what would get it to get all the way through?If you used the link in the first post and you see a graphical GUI, then yes you are using version 2. The link to Double A's forum post only had version 1.6.3, my bad, need glasses, lol.

QUOTE(OriginalHamster @ Aug 23 2010, 09:41 AM) .....
Just cIOS249 and cIOS202, all my other IOS are Nintendo's official (4.2 version), and IOS58.

Most likely then version 2 has some bugs in it with certain versions of IOS/cIOS. Do other reporting applications work for you, like Dop-Mii? It would be interesting to know what version of IOS/cIOS you have installed. For comparison you can see my sample report above for IOS versions that caused no conflict. As for the cIOS versions installed, which are not clear in the report , they are:
-Waninikoko's cIOSx Rev20:
CIOS249 with IOS57 Base
CIOS250 with IOS38 Base
-cMIOS rev5 (GameCube) Using MIOS V10
-Herme's CIOS Rev4:
CIOS202 with IOS38 Base
-Herme's CIOS Rev5:
CIOS222 with IOS38 Base
CIOS223 with IOS37 Base
CIOS224 with IOS57 Base

Hope that gives you something to compare with at least...

-[]D

 

[OriginalHamster]

It didn't reach a complete report just:
Region: NTSC-U
The system menu v481 is running under IOS58 (rev 6175)
Hollywood v0x11
Console ID: 54277855
Boot2 v4
Found 230 titles
Found 28 IOS on this console
Found 9 IOS Stubs on this console

DopMii scan works just fine, it can see all my IOS/cIOS installed

 

[FIX94]

It didn't reach a complete report just:
Region: NTSC-U
The system menu v481 is running under IOS58 (rev 6175)
Hollywood v0x11
Console ID: 54277855
Boot2 v4
Found 230 titles
Found 28 IOS on this console
Found 9 IOS Stubs on this console

DopMii scan works just fine, it can see all my IOS/cIOS installed

It also doesn't work for me with the first try, I fixed it by using dop-mii to reinstall the IOS3 stub and IOS4 stub and remove them again

 

[WiiUBricker]

SysCheck v2.0 - Released

MetaFile

Homebrew application which does several checks on installed IOS and custom IOS:
- IOS Stub;
- Fake signature (aka Trucha Bug);
- ES_DiVerify (aka ES_Identify);
- Flash Access;
- NAND Access;
- Boot2 Access;
- USB 2.0.

sysCheck generates a report on the root of the SD card (sd:/sysCheck.csv).

The author can not be held responsible for any damage sysCheck might cause!

------------------
Changelog

Version 2.0
* Added a very nice GUI
* Improved report text (no Enabled/Disabled anymore)
* Added BC and MIOS check
* Report can be displayed without SD
* Fixed some bugs
* Easy to translate (language file in source)

Download Link

-[]D

Nice for not giving the author any credit and removing his name..
This sure is gbatemp -.-

 

[FIX94]

The CORRECT changelog

:

Version 2.0 by Double_A

* Added a very nice GUI (thx NeoRame)
* Improved report text (no Enabled/Disabled anymore)
* Added BC and MIOS check
* Report can be displayed without SD
* Fixed some bugs
* Easy to translate (language file in source)

And the HOTFIX release from yesterday:
http://www.mediafire.com/?pjq1k2kd8f3iqc5
Thanks to Double_A, user of the german forum wii-homebrew.com

SOURCE

 

[erikspyder]

Unfortunately, no source code available for version 2.0.